EN 61300-2-14:2006

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - Optical power handling and damage threshold characterization

This part of EN 61300 is to characterize the robustness of a fibre optic passive component or interconnecting device against damage from exposure to optical power.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-14: Prüfungen - Ermittlung von Kennwerten der optischen Leistung

Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-14: Essais - Traitement de la puissance optique et caractérisation du seuil de dommage

Cette partie de la EN 61300 est de proposer une méthode permettant de déterminer la robustesse d'un composant ou d'un dispositif d'interconnexion passif à fibres optiques contre les dommages dus à la puissance optique.

Povezovalne naprave in pasivne komponente optičnih vlaken – Osnovno preskušanje in merilni postopki – 2-14. del: Preskusi – Ravnanje z optično močjo in značilnosti praga poškodb (IEC 61300-2-14:2005)

General Information

• Status: Withdrawn
• Publication Date: 23-May-2006
• Withdrawal Date: 28-Feb-2009
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Parallel Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 12-Dec-2013
• Completion Date: 12-Dec-2013
• Ref Project: SIST EN 61300-2-14:2006 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-14: Tests - Optical power handling and damage threshold characterization

Relations

• Replaces: EN 61300-2-14:1997 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - Maximum input power
• Effective Date: 29-Jan-2023
• Replaced By: EN 61300-2-14:2013 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - High optical power
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI SIST EN 61300-2-14:2006

STANDARD
oct 2006
Povezovalne naprave in pasivne komponente optičnih vlaken – Osnovno
preskušanje in merilni postopki – 2-14. del: Preskusi – Ravnanje z optično
močjo in značilnosti praga poškodb (IEC 61300-2-14:2005)
Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-14: Tests – Optical power handling and damage
threshold characterization (IEC 61300-2-14:2005)
ICS 33.180.20 Referenčna številka
SIST EN 61300-2-14:2006(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 61300-2-14

NORME EUROPÉENNE
May 2006
EUROPÄISCHE NORM

ICS 33.180.20 Supersedes EN 61300-2-14:1997


English version


Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures
Part 2-14: Tests - Optical power handling and
damage threshold characterization
(IEC 61300-2-14:2005)


Dispositifs d'interconnexion et Lichtwellenleiter -
composants passifs à fibres optiques - Verbindungselemente und passive
Méthodes fondamentales d'essais Bauteile
et de mesures Teil 2-14: Prüfungen -
Partie 2-14: Essais - Ermittlung von Kennwerten
Traitement de la puissance optique et der optischen Leistung
caractérisation du seuil de dommage (IEC 61300-2-14:2005)
(CEI 61300-2-14:2005)




This European Standard was approved by CENELEC on 2006-03-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61300-2-14:2006 E

---------------------- Page: 2 ----------------------

EN 61300-2-14:2006 - 2 -

Foreword
The text of document 86B/2204/FDIS, future edition 2 of IEC 61300-2-14, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61300-2-14 on 2006-03-01.
This European Standard supersedes EN 61300-2-14:1997.
Specific technical changes from EN 61300-2-14:1997 include a fundamental change of the measurement
method to introduce various measurement environments such as limited testing resources.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-12-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-03-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61300-2-14:2005 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61300-2-14:2006

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.


Publication Year Title EN/HD Year
1) 2)
IEC 60825-1 – Safety of laser products EN 60825-1 1994
+ corr. December Part 1: Equipment classification, requirements + corr. February 1995
- and user's guide + A11 1996

1) 2)
IEC 61300-1 – Fibre op
...