EN 62841-3-1:2014/prA2:2024
(Amendment)Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws
Outils électroportatifs à moteur, outils transportables et machines pour jardins et pelouses - Sécurité - Partie 3-1: Exigences particulières pour les scies circulaires à table transportables
Električna motorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 3-1. del: Posebne zahteve za prenosne namizne žage - Dopolnilo A2
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2025
Električna motorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost
- 3-1. del: Posebne zahteve za prenosne namizne žage - Dopolnilo A2
Electric motor-operated hand-held tools, transportable tools and lawn and garden
machinery - Safety - Part 3-1: Particular requirements for transportable table saws
Outils électroportatifs à moteur, outils transportables et machines pour jardins et
pelouses - Sécurité - Partie 3-1: Exigences particulières pour les scies circulaires à table
transportables
Ta slovenski standard je istoveten z: EN IEC 62841-3-1:2014/prA2:2024
ICS:
25.080.60 Strojne žage Sawing machines
25.140.20 Električna orodja Electric tools
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
116/841/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62841-3-1/AMD2 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-11-08 2025-01-31
SUPERSEDES DOCUMENTS:
116/835/RR
IEC TC 116 : SAFETY OF MOTOR-OPERATED ELECTRIC TOOLS
SECRETARIAT: SECRETARY:
United States of America Mr Joseph Harding
OF INTEREST TO THE FOLLOWING COMMITTEES: HORIZONTAL FUNCTION(S):
ASPECTS CONCERNED:
Safety
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries” clauses
to be included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for submitting ISC
clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Amendment 2 - Electric motor-operated hand-held tools, transportable tools and lawn and garden
machinery - Safety - Part 3-1: Particular requirements for transportable table saws
PROPOSED STABILITY DATE: 2030
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
IEC 62841-3-1/AMD2 ED1 © IEC 2024 2 116/841/CDV
1 INTERNATIONAL ELECTROTECHNICAL COMMISSION
2 ____________
4 ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS,
5 TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY –
6 SAFETY –
8 Part 3-1: Particular requirements for transportable table saws
10 AMENDMENT 2
12 FOREWORD
13 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
14 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
15 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
16 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
17 Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
18 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
19 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
20 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
21 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
22 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
23 consensus of opinion on the relevant subjects since each technical committee has representation from all
24 interested IEC National Committees.
25 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
26 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
27 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
28 misinterpretation by any end user.
29 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
30 transparently to the maximum extent possible in their national and regional publications. Any divergence between
31 any I
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.