Metallic communication cable test methods - Part 4-5: Electromagnetic compatibility (EMC) - Screening or coupling attenuation - Absorbing clamp method

The absorbing clamp method is suitable to determine the screening- or the coupling attenuation of metallic communication cables in the frequency range of 30 MHz to 2400 MHz, depending on the performance of the clamp. It is an alternative method to the the triaxial method of IEC 62153-4-4 or IEC 62153-4-9. Due to the undefined outer circuit of this absorbing clamp method, the test results obtained at different places and laboratories could vary by at least ± 6dB.

Prüfverfahren für metallische Kommunikationskabel - Teil 4-5: Elektromagnetische Verträglichkeit (EMV) - Kopplungsdämpfung oder Schirmdämpfung - Verfahren mit Absorberzangen

Méthodes d'essai des câbles métalliques de communication - Partie 4-5: Compatibilité électromagnétique (CEM) - Affaiblissement d’écran ou de couplage - Méthode de la pince absorbante

IEC 62153-4-5:2021 convient pour déterminer l’affaiblissement d’écran ou de couplage de câbles métalliques de communication dans la plage de fréquences de 30 MHz à 1 000 MHz (2 400 MHz), selon les performances de la pince. Il s’agit d’une variante de la méthode triaxiale de l’IEC 62153-4-4 ou de l’IEC 62153-4-9. Étant donné que le circuit externe de cette méthode de la pince absorbante n’est pas défini, les résultats d’essai obtenus dans différents lieux et laboratoires peuvent varier de plus de ±6 dB. Cette deuxième édition annule et remplace la première édition parue en 2006. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a. réorganisation des articles et des annexes; b. extension de la plage de fréquences à 2,4 GHz; c. application d’une procédure d’essai avec symétriseur virtuel et sans symétriseur avec un analyseur de réseau vectoriel (VNA) à plusieurs ports.

Preskusne metode za kovinske komunikacijske kable - 4-5. del: Elektromagnetna združljivost (EMC) - Zaslonsko slabljenje ali sklopno slabljenje - Metoda absorpcijske objemke (IEC 62153-4-5:2021)

General Information

Status
Published
Publication Date
30-Sep-2021
Drafting Committee
Current Stage
6060 - Document made available - Publishing
Start Date
01-Oct-2021
Completion Date
01-Oct-2021

Buy Standard

Draft
EN IEC 62153-4-5:2021 - BARVE
English language
43 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62153-4-5:2021
01-december-2021
Preskusne metode za kovinske komunikacijske kable - 4-5. del: Elektromagnetna
združljivost (EMC) - Zaslonsko slabljenje ali sklopno slabljenje - Metoda
absorpcijske objemke (IEC 62153-4-5:2021)
Metallic communication cable test methods - Part 4-5: Electromagnetic compatibility
(EMC) - Screening or coupling attenuation - Absorbing clamp method (IEC 62153-4-
5:2021)
Prüfverfahren für metallische Kommunikationskabel - Teil 4-5: Elektromagnetische
Verträglichkeit (EMV) - Kopplungsdämpfung oder Schirmdämpfung - Verfahren mit
Absorberzangen (IEC 62153-4-5:2021)
Méthodes d'essai des câbles métalliques et autres composants passifs - Partie 4-5:
Compatibilité électromagnétique (CEM) - Affaiblissement d'écran ou de couplage -
Méthode de la pince absorbante (IEC 62153-4-5:2021)
Ta slovenski standard je istoveten z: EN IEC 62153-4-5:2021
ICS:
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
SIST EN IEC 62153-4-5:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62153-4-5:2021

---------------------- Page: 2 ----------------------
SIST EN IEC 62153-4-5:2021


EUROPEAN STANDARD EN IEC 62153-4-5

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2021
ICS 33.120.10; 33.100.10

English Version
Metallic communication cable test methods - Part 4-5:
Electromagnetic compatibility (EMC) - Screening or coupling
attenuation - Absorbing clamp method
(IEC 62153-4-5:2021)
Méthodes d'essai des câbles métalliques de communication Prüfverfahren für metallische Kommunikationskabel - Teil 4-
- Partie 4-5: Compatibilité électromagnétique (CEM) - 5: Elektromagnetische Verträglichkeit (EMV) -
Affaiblissement d'écran ou de couplage - Méthode de la Kopplungsdämpfung oder Schirmdämpfung - Verfahren mit
pince absorbante Absorberzangen
(IEC 62153-4-5:2021) (IEC 62153-4-5:2021)
This European Standard was approved by CENELEC on 2021-09-30. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62153-4-5:2021 E

---------------------- Page: 3 ----------------------
SIST EN IEC 62153-4-5:2021
EN IEC 62153-4-5:2021 (E)
European foreword
The text of document 46/819/FDIS, future edition 2 of IEC 62153-4-5, prepared by IEC/TC 46 “Cables,
wires, waveguides, RF connectors, RF and microwave passive components and accessories” was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 62153-4-5:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022–06–30
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024–09–30
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62153-4-5:2021 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.