Fibre optic interconnecting devices and passive components - Non-wavelength-selective fibre optic branching devices - Part 1: Generic specification

IEC 60875-1:2015 applies to non-wavelength-selective fibre optic branching devices, all exhibiting the following features: - they are passive, in that they contain no optoelectronic or other transducing elements; - they have three or more ports for the entry and/or exit of optical power, and share optical power among these ports in a predetermined fashion; - the ports are optical fibres, or optical fibre connectors. This standard establishes uniform requirements for the optical, mechanical and environmental properties. This sixth edition cancels and replaces the fifth edition published in 2010 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - removal of terms and definitions for splitter, coupler, symmetric non-wavelength-selective branching device, asymmetric non-wavelength-selective branching device; - addition of terms and definitions for bidirectional non-wavelength-selective branching device and non-bidirectional non-wavelength-selective branching device, removal of assessment level. Keywords: non-wavelength-selective fibre optic branching devices, uniform requirements for the optical, mechanical and environmental properties.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Wellenlängenunabhängige Lichtwellenleiter-Verzweiger - Teil 1: Fachgrundspezifikation

Dispositifs d’interconnexion et composants passifs à fibres optiques - Dispositifs de couplage à fibres optiques ne dépendant pas de la longueur d’onde - Partie 1: Spécification générique

L'IEC 60875-1:2015 s'applique aux dispositifs de couplage à fibres optiques qui ne dépendent pas de la longueur d'onde. Tous présentent les caractéristiques suivantes: - ils sont passifs, au sens où ils ne contiennent aucun élément optoélectronique ou transducteur; - ils ont trois ports ou plus pour l'entrée et/ou la sortie de la puissance optique, et ils partagent la puissance optique parmi ces ports, selon une modalité spécifiée; - les ports sont des fibres optiques ou des connecteurs à fibres optiques. La présente norme établit des exigences uniformes relatives aux propriétés optiques, mécaniques et environnementales. La présente sixième édition annule et remplace la cinquième édition parue en 2010; elle constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - suppression des termes et définitions suivants: répartiteur, coupleur optique, dispositif de couplage ne dépendant pas de la longueur d'onde symétrique et dispositif de couplage ne dépendant pas de la longueur d'onde asymétrique; - ajout des termes et définitions suivants: dispositif de couplage bidirectionnel ne dépendant pas de la longueur d'onde, et dispositif de couplage non bidirectionnel ne dépendant pas de la longueur d'onde; suppression du niveau d'évaluation de la qualité. Mots clés: dispositifs de couplage à fibres optiques qui ne dépendent pas de la longueur d'onde, exigences uniformes relatives aux propriétés optiques, mécaniques et environnementales

Optični spojni elementi in pasivne komponente - Valovnodolžinsko neselektivni optični sklopniki - 1. del: Rodovna specifikacija (IEC 60875-1:2015)

Ta del standarda IEC 60875 velja za valovnodolžinsko neselektivne optične sklopnike z naslednjimi lastnostmi:
– so pasivni, saj ne vsebujejo nobenih optoelektronskih ali drugih prevodnih elementov;
– imajo vsaj tri vrata za vhod in/ali izhod optične moči, ki si optično moč delijo na predhodno določen način;
– vrata so optična vlakna ali optični konektorji.
Ta standard določa enotne zahteve za optične, mehanske in okoljske lastnosti.

General Information

Status
Published
Publication Date
02-Jul-2015
Withdrawal Date
10-Jun-2016
Current Stage
6060 - Document made available - Publishing
Start Date
03-Jul-2015
Completion Date
03-Jul-2015

Relations

Buy Standard

Standard
EN 60875-1:2015 - BARVE
English language
27 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60875-1:2015
01-oktober-2015
1DGRPHãþD
SIST EN 60875-1:2010
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH9DORYQRGROåLQVNRQHVHOHNWLYQL
RSWLþQLVNORSQLNLGHO5RGRYQDVSHFLILNDFLMD ,(&
Fibre optic interconnecting devices and passive components - Non-wavelength-selective
fibre optic branching devices - Part 1: Generic specification (IEC 60875-1:2015)
Lichtwellenleiter - Verbindungselemente und passive Bauteile -
wellenlängenunabhängige Lichtwellenleiter-Verzweiger - Teil 1: Fachgrundspezifikation
(IEC 60875-1:2015)
Dispositifs d’interconnexion et composants passifs à fibres optiques - Dispositifs de
couplage pour fibres optiques ne dépendant pas de la longueur d’onde - Partie 1:
Spécification générique (IEC 60875-1:2015)
Ta slovenski standard je istoveten z: EN 60875-1:2015
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 60875-1:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60875-1:2015

---------------------- Page: 2 ----------------------

SIST EN 60875-1:2015


EUROPEAN STANDARD EN 60875-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2015
ICS 33.180.20 Supersedes EN 60875-1:2010
English Version
Fibre optic interconnecting devices and passive components -
Non-wavelength-selective fibre optic branching devices - Part 1:
Generic specification
(IEC 60875-1:2015)
Dispositifs d'interconnexion et composants passifs à fibres Lichtwellenleiter - Verbindungselemente und passive
optiques - Dispositifs de couplage à fibres optiques ne Bauteile - wellenlängenunabhängige Lichtwellenleiter-
dépendant pas de la longueur d'onde - Partie 1: Verzweiger - Teil 1: Fachgrundspezifikation
Spécification générique (IEC 60875-1:2015)
(IEC 60875-1:2015)
This European Standard was approved by CENELEC on 2015-06-11. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60875-1:2015 E

---------------------- Page: 3 ----------------------

SIST EN 60875-1:2015
EN 60875-1:2015
European foreword
The text of document 86B/3806/CDV, future edition 6 of IEC 60875-1, prepared by SC 86B "Fibre
optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN 60875-1:2015.
The following dates are fixed:
(dop) 2016-03-11
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2016-06-11
• latest date by which the national standards conflicting with
the document have to be withdrawn

This document supersedes EN 60875-1:2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60875-1:2015 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60068 NOTE Harmonized in EN 60068 series.
IEC 60974 NOTE Harmonized in EN 60974 series.
IEC 61300-1 NOTE Harmonized as EN 61300-1.
IEC 61300-2 NOTE Harmonized in EN 61300-2 series.
IEC 61300-3 NOTE Harmonized in EN 61300-3 series.
IEC 61753 NOTE Harmonized in EN 61753 series.
IEC 61
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.