iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 60335-2-53:1991

(Main)

Safety of household and similar electrical appliances - Part 2: Particular requirements for electric sauna heating appliances

Safety of household and similar electrical appliances - Part 2: Particular requirements for electric sauna heating appliances

This clause of Part 1 is applicable, except as follows: 1.1 Replacement: This standard applies to electric sauna heating appliances having a rated input not exceeding 20 kW. Sauna heaters may be of the thermal storage type or of the non-thermal storage type. This standard does not take into account the special hazards which exist in places where there are young children or aged or infirm persons without supervision; in such cases, additional requirements may be necessary. This standard does not apply to: - appliances producing steam and only intended to cause perspiration by a part of the human body and for which the user does not enter into a cabinet or the like; - sweating baths where the head of the user remains outside the heated space. - tents and other collapsible sauna baths. For appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary. Attention is drawn to the fact that in many countries additional requirements are specified by the national health authorities and the national authorities responsible for the protection of labour.

Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2: Besondere Anforderungen für elektrische Sauna-Heizgeräte

Sécurité des appareils électrodomestiques et analogues - Partie 2: Règles particulières pour les appareils de chauffage électrique des saunas

Safety of household and similar electrical appliances - Part 2: Particular requirements for electric sauna heating appliances

General Information

Status
Withdrawn
Publication Date
25-Mar-1991
ICS
97.100 - Domestic, commercial and industrial heating appliances
Technical Committee
CLC/TC 61 - Safety of household and similar electrical appliances
Drafting Committee
IEC/TC 61 - IEC_TC_61
Parallel Committee
IEC/TC 61 - IEC_TC_61
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-May-2000
Completion Date
01-May-2000
Directive
2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
73/23/EEC - Electrical equipment designed for use within certain voltage limits
Ref Project
SIST EN 60335-2-53:1995 - Safety of household and similar electrical appliances -- Part 2: Particular requirements for electric sauna heating appliances

Relations

Replaced By
EN 60335-2-53:1997 - Safety of household and similar electrical appliances - Part 2-53: Particular requirements for sauna heating appliances
Effective Date
29-Jan-2023
Amended By
EN 60335-2-53:1991/A51:1996 - Safety of household and similar electrical appliances - Part 2: Particular requirements for electric sauna heating appliances
Effective Date
28-Jan-2023

Buy Standard

EN 60335-2-53:1995EN 60335-2-53:1995
PreviousNext
Standard
EN 60335-2-53:1995
English language
27 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60335-2-53:1995
01-marec-1995
Safety of household and similar electrical appliances - Part 2: Particular
requirements for electric sauna heating appliances
Safety of household and similar electrical appliances -- Part 2: Particular requirements
for electric sauna heating appliances
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke -- Teil 2:
Besondere Anforderungen für elektrische Sauna-Heizgeräte
Sécurité des appareils électrodomestiques et analogues -- Partie 2: Règles particulières
pour les appareils de chauffage électrique des saunas
Ta slovenski standard je istoveten z: EN 60335-2-53:1991
ICS:
97.100.10 (OHNWULþQLJUHOQLNL Electric heaters
SIST EN 60335-2-53:1995 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60335-2-53:1995

---------------------- Page: 2 ----------------------

SIST EN 60335-2-53:1995

---------------------- Page: 3 ----------------------

SIST EN 60335-2-53:1995

---------------------- Page: 4 ----------------------

SIST EN 60335-2-53:1995

---------------------- Page: 5 ----------------------

SIST EN 60335-2-53:1995

---------------------- Page: 6 ----------------------

SIST EN 60335-2-53:1995

---------------------- Page: 7 ----------------------

SIST EN 60335-2-53:1995

---------------------- Page: 8 ----------------------

SIST EN 60335-2-53:1995

---------------------- Page: 9 ----------------------

SIST EN 60335-2-53:1995

---------------------- Page: 10 ----------------------

SIST EN 60335-2-53:1
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN 60531:2000/A11:2019(Amendment)
Household electric thermal storage room heaters - Methods for measuring performance
SIST EN 60531:2002/A11:2019

2021: CLC legacy converted by DCLab NISOSTS

  • Amendment
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60675:1995/A11:2019(Amendment)
Household electric direct-acting room heaters - Methods for measuring performance
SIST EN 60675:1998/A11:2019

This standard applies to electric direct-acting room heaters. They may be portable, stationary, fixed, or built-in. It does not apply to: - thermal-storage room heaters (EN 60531); - heating appliances incorporated in the building structure; - central heating systems; - heaters connected to an air duct; - wall-paper, carpets or drapes incorporating flexible heating elements; - sauna stoves. This standard defines the main performance characteristics of direct-acting room heaters and specifies methods for measuring these characteristics, for the information of users. This standard does not specify values for performance characteristics. NOTE: - This standard does not deal with: - safety requirements (EN 60335-2-30); - acoustical noise of fan heaters (EN 60704-2-2).

  • Amendment
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60675:1995/A2:2018(Amendment)
Household electric direct-acting room heaters - Methods for measuring performance
SIST EN 60675:1998/A2:2018

This standard applies to electric direct -acting room heaters. They may be portable,
stationary, fixed, or built-in.
It does not apply to:
— thermal-storage room heaters (IEC 531);
- heating appliances incorporated in the building structure;
- central heating systems;
— heaters connected to an air duct;
- wall-paper, carpets or drapes incorporating flexible heating elements.
This standard defines the main performance characteristics of direct-acting room
heaters and specifies methods for measuring these characteristics, for the information of
users.
This standard does not specify values for performance characteristics.
NOTE - This standard does not deal with:
- safety requirements (IEC 335-2-30);
acoustical noise of fan heaters (IEC 704-2-2).

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60531:2000(Main)
Household electric thermal storage room heaters - Methods for measuring performance
SIST EN 60531:2002

Applies to electric storage heaters intended to heat the room in which they are located. It defines the main performance characteristics and describes methods for measuring these characteristics. It does not apply to heating appliances incorporated in the building structure, to central heating systems or to floor heating appliances.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60675:1995/A1:1998(Amendment)
Household electric direct-acting room heaters - Methods for measuring performance
SIST EN 60675:1998/A1:2002

EN following parallel vote

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60675:1995(Main)
Household electric direct-acting room heaters - Methods for measuring performance
SIST EN 60675:1998

Applies to electric direct-acting room heaters. They may be portable, stationary, fixed or built-in. It defines the main performance characteristics and the methods for measuring these characteristics. For thermal-storage room heaters, see IEC 60531.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50566:2017/A1:2023(Amendment)
Product standard to demonstrate the compliance of wireless communication devices with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 30 MHz to 6 GHz: hand-held and body mounted devices in close proximity to the human body
SIST EN 50566:2018/oprA1:2020

This product standard applies to wireless communication devices used at distances up to and including 200 mm from the human body, i.e. when held in the hand or in front of the face, mounted on the body, combined with other transmitting or non-transmitting devices or accessories (e.g. belt-clip, camera or Bluetooth add-on), or integrated into garments. The applicable frequency range is from 30 MHz to 6 GHz. The objective of this standard is to demonstrate the compliance of such devices with the basic restrictions and exposure limit values related to human exposure to radio frequency electromagnetic fields. For devices used next to the ear the applicable product standard is EN 50360:2017 [1]. For low power devices the applicable product standard is EN 50663:2017 [2].

  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50360:2017/A1:2023(Amendment)
Product standard to demonstrate the compliance of wireless communication devices, with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 300 MHz to 6 GHz: devices used next to the ear
SIST EN 50360:2018/oprA1:2020

This product standard applies to wireless communication devices used in close proximity to the human ear (e.g. mobile phones, wireless headsets). The applicable frequency range is from 300 MHz to 6 GHz. The objective of this standard is to demonstrate the compliance of such devices with the basic restrictions and exposure limit values related to human exposure to radio frequency electromagnetic fields. For devices used next to the body or in front of the face the applicable product standard is EN 50566:2017. For low power devices the applicable product standard is EN 50663:2017.

  • Draft
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60728-101-1:2023(Main)
Cable networks for television signals, sound signals and interactive services - Part 101-1: RF cabling for two-way home networks with all-digital channels load
SIST EN IEC 60728-101-1:2023

IEC 60728-101-1:2023 provides the requirements and describes the implementation guidelines of RF cabling for two-way home networks; it is applicable to any home network that distributes signals provided by CATV/MATV/SMATV cable networks (including individual receiving systems) having a coaxial cable output. It is also applicable to home networks where some part of the distribution network uses wireless links, for example in place of the receiver cord. This part of IEC 60728 is therefore applicable to RF cabling for two-way home networks with wired cords or wireless links inside a room and primarily intended for television and sound signals operating between about 5 MHz and 3 300 MHz. The frequency range is extended to 6 000 MHz for distribution techniques that replace wired cords with a wireless two-way communication inside a room (or a small number of adjacent rooms) that uses the 5 GHz to 6 GHz band. In a building divided into apartment blocks, the distribution of the signals inside the home starts from the home network interface (HNI) up to the system outlet or terminal input. The requirements at the system outlet are given in IEC 60728-101:2016, Clause 5 and the requirements at the HNI are given in IEC 60728-101:2016, Clause 7. In Clause 5 of this document, additional requirements are given. This document deals with various possibilities to distribute signals in a home network, using coaxial cables, balanced pair cables, fibre optic cables (glass or plastic) and also wireless links inside a room (or a small number of adjacent rooms) to replace wired cords. This document gives references to basic methods of measurement of the operational characteristics of the home cable network in order to assess its performance. All requirements refer to the performance limits, which are obtained between the input(s) at the home network interface (HNI) and the output at any system outlet when terminated in a resistance equal to the nominal load impedance of the system, unless otherwise specified. Where system outlets are not used, the above applies to the terminal input. The present document also provides limits for the accumulation of degradations if the home network is subdivided into a number of parts, using different transmission media (e.g. coaxial cabling, balanced cabling, optical cabling, wireless links). Clause 5 defines the performance limits measured at system outlet or terminal input for an unimpaired (ideal) test signal applied at the HNI. Under normal operating conditions for any digital channel and meeting these limits, the cumulative effect of the impairment of any single parameter at the HNI and that due to the home network produces signals not worse than the requirements given in IEC 60728-101-2. For digitally modulated signals, the quality requirement is a QEF (quasi error-free) reception. This document describes the physical layer connection for home networks. Description of protocols required for layer 2 and higher layers is out of the scope of this document. Logical connections between devices within the home network are therefore not always guaranteed. This International Standard is to be used in conjunction with IEC 60728-101:2016.

  • Draft
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60061-3:1993/A59:2023(Main)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
SIST EN 60061-3:2000/A59:2023
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day