EN 62053-24:2015/A1:2017
(Amendment)Electricity metering equipment (a.c.) - Particular requirements - Part 24: Static meters for reactive energy at fundamental frequency (classes 0,5 S, 1 S and 1)
Electricity metering equipment (a.c.) - Particular requirements - Part 24: Static meters for reactive energy at fundamental frequency (classes 0,5 S, 1 S and 1)
IEC 62053-24:2014 applies only to newly manufactured transformer operated static var-hour meters of accuracy classes 0,5 S, and 1 S as well as direct connected static var-hour meters of accuracy class 1, for the measurement of alternating current electrical reactive energy in 50 Hz or 60 Hz networks and it applies to their type tests only. It uses a conventional definition of reactive energy where the reactive power and energy is calculated from the fundamental frequency components of the currents and voltages only.
Wechselstrom-Elektrizitätszähler - Besondere Anforderungen - Teil 24: Elektronische Grundschwingungs-Blindverbrauchszähler der Genauigkeitsklassen 0,5 S, 1 S und 1
Equipement de comptage de l'électricité (c.a.) - Exigences particulières - Partie 24: Compteurs statiques d’énergie réactive à la fréquence fondamentale (classes 0,5 S, 1 S et 1)
Le contenu du corrigendum de mars 2018 a été pris en considération dans cette exemplaire.
Oprema za merjenje električne energije (izmenični tok) - Posebne zahteve - 24. del: Statični števci osnovne komponente jalove energije (razredi 0,5 S, 1 S in 1) - Dopolnilo A1
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2017
2SUHPD]DPHUMHQMHHOHNWULþQHHQHUJLMHL]PHQLþQLWRN3RVHEQH]DKWHYHGHO
6WDWLþQLãWHYFLRVQRYQHNRPSRQHQWHMDORYHHQHUJLMHUD]UHGL66LQ
'RSROQLOR$
Electricity metering equipment (a.c.) - Particular requirements - Part 24: Static meters for
reactive energy at fundamental frequency (classes 0,5 S, 1 S and 1)
Wechselstrom-Elektrizitätszähler - Besondere Anforderungen - Teil 24: Elektronische
Grundschwingungs-Blindverbrauchszähler der Genauigkeitsklassen 0,5 S, 1 S und 1
Equipement de comptage de l'électricité (c.a.) - Prescriptions particulières - Partie 24:
Compteurs statiques d’énergie réactive à la fréquence fondamentale (classes 0,5 S, 1 S
et 1)
Ta slovenski standard je istoveten z: EN 62053-24:2015/A1:2017
ICS:
17.220.20 0HUMHQMHHOHNWULþQLKLQ Measurement of electrical
PDJQHWQLKYHOLþLQ and magnetic quantities
91.140.50 Sistemi za oskrbo z elektriko Electricity supply systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 62053-24:2015/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2017
ICS 17.220.20; 91.140.50
English Version
Electricity metering equipment (a.c.) - Particular requirements -
Part 24: Static meters for reactive energy at fundamental
frequency (classes 0,5 S, 1 S and 1)
(IEC 62053-24:2014/A1:2016)
Equipement de comptage de l'électricité (c.a.) - Wechselstrom-Elektrizitätszähler - Besondere
Prescriptions particulières - Partie 24: Compteurs statiques Anforderungen - Teil 24: Elektronische Grundschwingungs-
d'énergie réactive à la fréquence fondamentale Blindverbrauchszähler der Genauigkeitsklassen
(classes 0,5 S, 1 S et 1) 0,5 S, 1 S und 1
(IEC 62053-24:2014/A1:2016) (IEC 62053-24:2014/A1:2016)
This amendment A1 modifies the European Standard EN 62053-24:2015; it was approved by CENELEC on 2016-12-20. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62053-24:2015/A1:2017 E
European foreword
The text of document 13/1703/FDIS, future IEC 62053-24:2014/A1, prepared by IEC/TC 13 “Electrical
energy measurement and control” was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 62053-24:2015/A1:2017.
The following dates are fixed:
(dop) 2017-09-30
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2020-03-31
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association.
Endorsement notice
The text of the International Standard IEC 62053-24:2014/A1:2016 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.