EN IEC 63286:2022
(Main)Flexible organic light emitting diode (OLED) panels for general lighting - Performance requirements
Flexible organic light emitting diode (OLED) panels for general lighting - Performance requirements
IEC 632186:2022 specifies the performance requirements of flexible organic light emitting diode tiles and panels for use on supplies up to 120 V ripple free DC for indoor and similar general lighting purposes and designed for being bent during the manufacturing process of curved luminaires.
Flexible organische Licht emittierende Dioden (OLED) Panels für die Allgemeinbeleuchtung - Anforderungen an die Arbeitsweise
Panneaux à diodes électroluminescentes organiques (OLED) flexibles destinés à l'éclairage général - Exigences de performance
L'IEC 63286:2022 spécifie les exigences de performance des dalles et panneaux à diodes électroluminescentes organiques flexibles destinés à être utilisés avec des alimentations jusqu'à 120 V en courant continu sans ondulation pour l'éclairage général intérieur ou analogue, et conçus pour être pliés pendant le processus de fabrication de luminaires incurvés.
Gibke plošče z organskimi svetlečimi diodami (OLED) za splošno razsvetljavo - Tehnične zahteve (IEC 63286:2022)
Ta dokument določa tehnične zahteve za gibke ploščice in plošče z organskimi svetlečimi diodami za uporabo z enosmerno napajalno napetostjo do 120 V brez nihanja za notranjo osvetlitev in podobne namene splošne razsvetljave, ki so zasnovane za upogibanje med postopkom izdelave ukrivljenih svetilk. Zahteve iz tega dokumenta se navezujejo samo na tipsko preskušanje.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2023
Gibke plošče z organskimi svetlečimi diodami (OLED) za splošno razsvetljavo -
Tehnične zahteve (IEC 63286:2022)
Flexible Organic Light Emitting Diode (OLED) panels for general lighting - Performance
requirements (IEC 63286:2022)
Flexible organische Licht emittierende Dioden (OLED) Panels für die
Allgemeinbeleuchtung - Anforderungen an die Arbeitsweise (IEC 63286:2022)
Panneaux à diodes électroluminescentes organiques (OLED) flexibles destinés à
l'éclairage général - Exigences de performance (IEC 63286:2022)
Ta slovenski standard je istoveten z: EN IEC 63286:2022
ICS:
29.140.01 Žarnice na splošno Lamps in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 63286
NORME EUROPÉENNE
EUROPÄISCHE NORM November 2022
ICS 29.140.99
English Version
Flexible organic light emitting diode (OLED) panels for general
lighting - Performance requirements
(IEC 63286:2022)
Panneaux à diodes électroluminescentes organiques Flexible organische Licht emittierende Dioden (OLED)
(OLED) flexibles destinés à l'éclairage général - Exigences Panels für die Allgemeinbeleuchtung - Anforderungen an
de performance die Arbeitsweise
(IEC 63286:2022) (IEC 63286:2022)
This European Standard was approved by CENELEC on 2022-11-02. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 63286:2022 E
European foreword
The text of document 34A/2291/FDIS, future edition 1 of IEC 63286, prepared by SC 34A "Electric
light sources" of IEC/TC 34 "Lighting" was submitted to the IEC-CENELEC parallel vote and approved
by CENELEC as EN IEC 63286:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2023-08-02
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025-11-02
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 63286:2022 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
ISO/CIE 11664-5:2016 NOTE Harmonized as EN ISO 11664-5:2016 (not modified)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60050-845 - International Electrotechnical Vocabulary. - -
Lighting
IEC 62504 - General lighting - Light emitting diode EN 62504 -
(LED) products and related equipment -
Terms and definitions
IEC 62868-2-3 - Organic light emitting diode (OLED) light EN IEC 62868-2-3 -
sources for general lighting - Safety - Part
2-3: Particular requirements - Flexible
OLED tiles and panels
IEC 62922 2016 Organic light emitting diode (OLED) panels EN 62922 2017
for general lighting - Performance
requirements
+ AMD 2021 + A1 2021
IEC/TS 62972 - General lighting - Organic light emitting - -
diode (OLED) products and related
equipment - Terms and definitions
CIE 025 2015 Test Method for LED Lamps, LED - -
Luminaires and LED Modules
CIE S 025-SP1 2019 Test Method for OLED Luminaires and - -
OLED Light Sources
IEC 63286 ®
Edition 1.0 2022-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Flexible organic light emitting diode (OLED) panels for general lighting –
Performance requirements
Panneaux à diodes électroluminescentes organiques (OLED) flexibles destinés à
l'éclairage général – Exigences de performance
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.99 ISBN 978-2-8322-5705-0
– 2 – IEC 63286:2022 © IEC 2022
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 General statement and test conditions . 7
4.1 General . 7
4.2 General test conditions . 7
4.3 Stabilization . 8
4.3.1 General requirements for stabilization. 8
4.3.2 Current-driven stabilization . 8
4.3.3 Voltage-driven stabilization . 8
5 Marking . 8
5.1 Mandatory marking . 8
5.2 Additional marking . 9
5.3 Information on reliability of electrical connection . 10
6 Initial photometric and electrical characteristics . 10
6.1 General . 10
6.2 Input power . 10
6.3 Luminous flux . 10
6.4 Luminous efficacy . 11
6.5 Chromaticity coordinates . 11
6.6 Correlated colour temperature (CCT) . 11
6.7 Colour rendering index (CRI) . 11
6.8 Average luminance . 12
6.8.1 Initial average luminance (flat configuration) . 12
6.8.2 Initial average luminance (convex configuration) . 12
6.8.3 Initial average luminance (concave configuration) . 12
6.9 Luminance uniformity . 12
6.10 Luminous intensity distribution . 13
6.11 Surface chromaticity uniformity . 13
6.12 Angular chromaticity uniformity . 13
7 Maintained photometric characteristics . 14
7.1 General . 14
7.2 Luminous flux maintenance . 14
7.3 Maintained operating voltage . 14
7.4 Maintained chromaticity coordinates . 14
8 Reliability . 14
8.1 General . 14
8.2 High temperature and high humidity operation test . 14
8.3 High temperature and high humidity storage test . 15
8.4 Reliability of connection . 15
Annex A (normative) Measuring methods for convex and concave configurations . 16
A.1 General . 16
A.2 Luminous flux . 16
A.2.1 General . 16
A.2.2 Integrating sphere measurements . 16
IEC 63286:2022 © IEC 2022 – 3 –
A.2.3 Goniophotometric measurements . 17
A.3 Average luminance – LMD . 17
A.4 Angular chromaticity uniformity . 18
Bibliography . 22
Figure A.1 – 4π geometry sphere measurement set-ups . 16
Figure A.2 – Goniophotometer measurement set-ups . 17
Figure A.3 – Average luminance measurement set-ups (Case 1) . 18
Figure A.4 – Average luminance measurement set-ups (Case 2) . 18
Figure A.5 – Set-up for angular chromaticity measurements in the flat configuration . 20
Figure A.6 – Set-up for angular chromaticity measurements in the convex configuration . 20
Figure A.7 – Set-up for angular chromaticity measurements in the concave
configuration . 20
Figure A.8 – Schematic view of the concave configuration where the viewing angle is
smaller than 80° . 21
Figure A.9 – Schematic view of the concave configuration which enables
measurements up to 45° viewing angle . 21
Table 1 – Mandatory marking and location of marking . 8
Table 2 – Additional marking .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.