EN 60322:2001

Railway applications - Electric equipment for rolling stock - Rules for power resistors of open construction

States the characteristics of the resistors; the service conditions with which the power resistors have to comply; the tests intended for confirming that these conditions have been met and the methods to be adopted for these tests; the information to be marked on, or given with, the resistors. The object of this standard is to adapt the general rules given in IEC 60077-1 to power resistors for rolling stock in order to obtain uniformity of requirements and tests throughout the corresponding range of components and to avoid the need for testing to two different standards.

Bahnanwendungen - Elektrische Ausrüstung für Bahnfahrzeuge - Regeln für Leistungswiderstände in offener Bauweise

Applications ferroviaires - Equipements électriques du matériel roulant - Règles relatives aux résistances de puissance de construction ouverte

La présente norme énonce les caractéristiques des résistances;les conditions de service auxquelles il faut que les résistances de puissance satisfassent; les essais destinés à confirmer que ces conditions ont été satisfaites et les méthodes d'essais à utiliser; les informations inscrites sur les résistances, ou à fournir. L'objet de cette norme est d'adapter les règles générales données dans la CEI 60077-1 aux résistances de puissance pour le matériel roulant afin d'obtenir des prescriptions et des essais uniformes pour toute la gamme correspondante de composants et d'éviter pour les essais d'avoir recours à deux normes différentes.

Železniške naprave – Električna oprema za vozna sredstva – Pravila za močnostne upore odprte konstrukcije (IEC 60322:2001)

General Information

• Status: Published
• Publication Date: 04-Jul-2001
• Withdrawal Date: 30-Apr-2004
• ICS: 29.280 - Electric traction equipment
• Technical Committee: CLC/TC 9X - Electrical and electronic applications for railways
• Drafting Committee: CLC/SC 9XB - Electromechanical material on board rolling stock
• Parallel Committee: IEC/TC 9 - IEC_TC_9
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 05-Jul-2001
• Completion Date: 05-Jul-2001
• Ref Project: SIST EN 60322:2002 - Railway applications - Electric equipment for rolling stock - Rules for power resistors of open construction

Relations

• Replaces: HD 91 S1:1977 - Rules for ohmic resistors used in the power circuits of electrically powered vehicles
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2002
1DGRPHãþD
SIST HD 91 S1:1999
äHOH]QLãNHQDSUDYH±(OHNWULþQDRSUHPD]DYR]QDVUHGVWYD±3UDYLOD]DPRþQRVWQH
XSRUHRGSUWHNRQVWUXNFLMH,(&
Railway applications - Electric equipment for rolling stock - Rules for power resistors of
open construction
Bahnanwendungen - Elektrische Ausrüstung für Bahnfahrzeuge - Regeln für
Leistungswiderstände in offener Bauweise
Applications ferroviaires - Equipements électriques du matériel roulant - Règles relatives
aux résistances de puissance de construction ouverte
Ta slovenski standard je istoveten z: EN 60322:2001
ICS:
31.040.01 Upori splošno Resistors in general
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60322
NORME EUROPÉENNE
EUROPÄISCHE NORM July 2001
ICS 29.280 Supersedes HD 91 S1:1977
English version
Railway applications -
Electric equipment for rolling stock -
Rules for power resistors of open construction
(IEC 60322:2001)
Applications ferroviaires - Bahnanwendungen -
Equipements électriques du matériel Elektrische Ausrüstung für Bahnfahrzeuge -
roulant - Regeln für Leistungswiderstände in offener
Règles relatives aux résistances de Bauweise
puissance de construction ouverte (IEC 60322:2001)
(CEI 60322:2001)
This European Standard was approved by CENELEC on 2001-05-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60322:2001 E
Foreword
The text of document 9/607/FDIS, future edition 2 of IEC 60322, prepared by IEC TC 9, Electric
railway equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC
as EN 60322 on 2001-05-01.
This European Standard supersedes HD 91 S1:1977.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2002-02-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2004-05-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annexes A and ZA are normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60322:2001 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 60322:2001
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60050-811 1991 International electrotechnical vocabulary--
- Chapter 811: Electric traction
IEC 60077-1 1999 Railway applications - Electric --
equipment for rolling stock
Part 1: General service conditions and
general rules
IEC 60364-4-41 1992 Electrical installations of buildings HD 384.4.41 S2 1996
(mod) Part 4: Protection for safety -- Chapter
41: Protection against electric shock
IEC 60943 1998 Guidance concerning the permissible--
temperature rise for parts of electrical
equipment, in particular for terminals
IEC 61133 1992 Railway applications - Testing of rolling--
stock after completion of construction
and before entry into service
IEC 61373 1999 Railway applications - Rolling stock EN 61373 1999
equipment - Shock and vibration tests

NORME CEI
INTERNATIONALE IEC
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2001-03
Applications ferroviaires –
Equipements électriques du matériel roulant –
Règles relatives aux résistances de puissance
de construction ouverte
Railway applications –
Electric equipment for rolling stock –
Rules for power resistors of open construction
 IEC 2001 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: [phone] e-mail: [e-mail] IEC web site http://www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
R
PRICE CODE
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue

60322 © IEC:2001 – 3 –
CONTENTS
Page
FOREWORD.5
Clause
1 Scope and object .9
2 Normative references.9
3 Definitions .11
4 Product information.15
4.1 General .15
4.2 Nature of information .15
4.3 Marking .17
5 Normal service conditions .17
6 Constructional and performance requirements .17
6.1 Constructional requirements .17
6.2 Performance requirements.25
7 Test categories.25
7.1 General .25
7.2 Type tests .27
7.3 Routine tests .27
7.4 Investigatory tests.27
7.5 General test conditions .27
8 Tests .27
8.1 General .27
8.2 Measurements.29
8.3 Temperature-rise tests.31
8.4 Tests for withstanding vibration and shock .31
8.5 Dielectric tests.31
8.6 Hygroscopic test .35
8.7 Fault current test .35
8.8 Test for performance in rain.35
Annex A (normative) Double insulated resistors.37
Figure A.1 – Typical arrangements of double insulated resistors .37
Table 1 − Tolerances on resistance values of resistor sections .19
Table 2 − Tolerances on resistance values of resistor elements.19
Table 3 − Temperature-rise limits for accessible parts .21
Table 4 − List of tests.29
Table 5 − Test voltages for basic insulation .33
Table 6 − Test voltages for functional insulation .33

60322 © IEC:2001 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
RAILWAY APPLICATIONS –
ELECTRIC EQUIPMENT FOR ROLLING STOCK –
RULES FOR POWER RESISTORS OF OPEN CONSTRUCTION
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization
for Standardization (ISO) in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical specifications, technical reports or guides and they are accepted by the National
Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60322 has been prepared by IEC technical committee 9: Electric
railway equipment.
This second edition cancels and replaces the first edition published in 1970, of which it
constitutes a technical revision.
The text of this standard is based on the following documents:
FDIS Report on voting
9/607/FDIS 9/611/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 3.
Annex A forms an integral part of this standard.

60322 © IEC:2001 – 7 –
The committee has decided that the contents of this publication will remain unchanged
until 2010. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
60322 © IEC:2001 – 9 –
RAILWAY APPLICATIONS –
ELECTRIC EQUIPMENT FOR ROLLING STOCK –
RULES FOR POWER RESISTORS OF OPEN CONSTRUCTION
1 Scope and object
This International Standard gives the rules for all power resistors (for example, braking,
heating, snubber
...