EN 62707-1:2014/A1:2018

LED-binning - Part 1: General requirements and white colour grid intended for automotive applications

LED-Binning - Teil 1: Allgemeine Anforderungen und Weißfelder

Tri des LED - Partie 1: Exigences générales et matrice de couleur blanche destinées aux applications automobiles

Sortiranje LED - 1. del: Splošne zahteve in bela barvna mreža, namenjena za uporabo v avtomobilski industriji - Dopolnilo A1 (IEC 62707-1:2013/A1:2018)

General Information

• Status: Published
• Publication Date: 25-Oct-2018
• Withdrawal Date: 20-Sep-2021
• ICS: 29.140.99 - Other standards related to lamps
• Technical Committee: CLC/TC 34 - 'Lamps and related equipment
• Drafting Committee: IEC/SC 34A - IEC_SC_34A
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 26-Oct-2018
• Completion Date: 26-Oct-2018
• Ref Project: SIST EN 62707-1:2016/A1:2019 - LED-binning - Part 1: General requirements and white colour grid intended for automotive applications (IEC 62707-1:2013/A1:2018)

Relations

• Amends: EN 62707-1:2014 - LED-binning - Part 1: General requirements and white colour grid
• Effective Date: 02-May-2017

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62707-1:2016/A1:2019
01-januar-2019
Sortiranje LED - 1. del: Splošne zahteve in bela barvna mreža, namenjena za
uporabo v avtomobilski industriji - Dopolnilo A1 (IEC 62707-1:2013/A1:2018)
LED-binning - Part 1: General requirements and white colour grid intended for
automotive applications (IEC 62707-1:2013/A1:2018)
LED-Binning - Teil 1: Allgemeine Anforderungen und Weißfelder (IEC 62707-
1:2013/A1:2018)
Tri des LED - Partie 1: Exigences générales et matrice de couleur blanche destinées aux
applications automobiles (IEC 62707-1:2013/A1:2018)
Ta slovenski standard je istoveten z: EN 62707-1:2014/A1:2018
ICS:
29.140.01 Žarnice na splošno Lamps in general
SIST EN 62707-1:2016/A1:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62707-1:2016/A1:2019

---------------------- Page: 2 ----------------------

SIST EN 62707-1:2016/A1:2019


EUROPEAN STANDARD EN 62707-1:2014/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2018
ICS 29.140.99

English Version
LED-binning - Part 1: General requirements and white colour
grid intended for automotive applications
(IEC 62707-1:2013/A1:2018)
Tri des LED - Partie 1: Exigences générales et matrice de LED-Binning - Teil 1: Allgemeine Anforderungen und
couleur blanche destinées aux applications automobiles Weißfelder
(IEC 62707-1:2013/A1:2018) (IEC 62707-1:2013/A1:2018)
This amendment A1 modifies the European Standard EN 62707-1:2014; it was approved by CENELEC on 2018-09-21. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.




European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62707-1:2014/A1:2018 E

---------------------- Page: 3 ----------------------

SIST EN 62707-1:2016/A1:2019
EN 62707-1:2014/A1:2018 (E)
European foreword
The text of document 34A/2098/FDIS, future IEC 62707-1/A1, prepared by SC 34A "Lamps" of
IEC/TC 34 "Lamps and related equipment" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 62707-1:2014/A1:2018.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2019-06-21
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2021-09-21
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62707-1:2013/A1:2018 was approved by CENELEC as a
European Standard without any modification.


2

---------------------- Page: 4 ----------------------

SIST EN 62707-1:2016/A1:2019



IEC 62707-1

®


Edition 1.0 2018-08




INTERNATIONAL



STANDARD




NORME


INTERNATIONALE





AM ENDMENT 1

AM ENDEMENT 1





LED-binning –

Part 1: General requirements and white colour grid intended for automotive

applications




Tri des LED –

Partie 1: Exigences générales et matrice de couleur blanche destinées aux


applications automobiles













INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE

INTERNATIONALE




ICS 29.140.99 ISBN 978-2-8322-5944-3




Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez
...