EN 62323:2005

Dimensions of half pot-cores made of ferrite for inductive proximity switches

Lays down the important dimensions for the mechanical interchangeability of a preferred half pot-core series of ferrites, intended to be used in inductive proximity switches.

Ferritschalenkernhälften für induktive Näherungsschalter

Dimensions de demi-pots en ferrite pour des commutateurs inductifs de proximité

Lays down the important dimensions for the mechanical interchangeability of a preferred half pot-core series of ferrites, intended to be used in inductive proximity switches.

Mere feritnih jeder v obliki polovičnih lončkov za induktivna bližinska stikala (IEC 62323:2005)

General Information

• Status: Withdrawn
• Publication Date: 29-Jun-2005
• Withdrawal Date: 31-May-2008
• ICS: 29.100.10 - Magnetic components
• Technical Committee: CLC/SR 51 - Magnetic components and ferrite materials
• Drafting Committee: IEC/TC 51 - IEC_TC_51
• Parallel Committee: IEC/TC 51 - IEC_TC_51
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-May-2023
• Completion Date: 01-May-2023
• Ref Project: SIST EN 62323:2005 - Dimensions of half pot-cores made of ferrite for inductive proximity switches

Relations

• Replaced By: EN IEC 63093-3:2020 - Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 3: Half pot-cores made of ferrite for inductive proximity switches
• Effective Date: 26-May-2020

Standards Content (Sample)

SLOVENSKI SIST EN 62323:2005
STANDARD
december 2005
Mere feritnih jeder v obliki polovičnih lončkov za induktivna bližinska stikala
(IEC 62323:2005)
Dimensions of half pot-cores made of ferrite for inductive proximity switches (IEC
62323:2005)
ICS 29.100.10 Referenčna številka
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

EUROPEAN STANDARD EN 62323
NORME EUROPÉENNE
EUROPÄISCHE NORM June 2005
ICS 29.100.10
English version
Dimensions of half pot-cores made of ferrite
for inductive proximity switches
(IEC 62323:2005)
Dimensions de demi-pots en ferrite  Ferritschalenkernhälften für induktive
pour des commutateurs inductifs Näherungsschalter
de proximité (IEC 62323:2005)
(CEI 62323:2005)
This European Standard was approved by CENELEC on 2005-06-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 62323:2005 E
Foreword
The text of document 51/817/FDIS, future edition 1 of IEC 62323, prepared by IEC TC 51, Magnetic
components and ferrite materials, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 62323 on 2005-06-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-03-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2008-06-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62323:2005 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60133 NOTE Harmonized as EN 60133:2001 (not modified).
IEC 60424-2 NOTE Harmonized as EN 60424-2:1997 (not modified).
IEC 61332 NOTE Harmonized as EN 61332:1997 (not modified).
IEC 62044-1 NOTE Harmonized as EN 62044-1:2002 (not modified).
IEC 62044-2 NOTE Harmonized as EN 62044-2:2005 (not modified).
IEC 62044-3 NOTE Harmonized as EN 62044-3:2001 (not modified).
__________
- 3 - EN 62323:2005
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60424-1 1999 Ferrite cores - Guide on the limits of EN 60424-1 1999
surface irregularities
Part 1: General specification
INTERNATIONAL IEC
STANDARD 62323
First edition
2005-06
Dimensions of half pot-cores made of ferrite
for inductive proximity switches

 IEC 2005  Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale F
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue

– 2 – 62323  IEC:2005(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
DIMENSIONS OF HALF POT-CORES MADE OF FERRITE
FOR INDUCTIVE PROXIMITY SWITCHES

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards. Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)“). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or ag
...