EN 62211:2017
(Main)Inductive components - Reliability management
Inductive components - Reliability management
IEC 62211:2017(E) sets up a broad basis of electric and mechanical criteria of failure test procedures. This document is applicable to inductive components (chokes and transformers) based on magnetically soft materials. This edition includes the following significant technical changes with respect to the previous edition: a) continuous shock and mechanical shock are integrated in the test conditions; b) the normative references in Table 3 are changed.
Induktive Bauelemente - Zuverlässigkeitsmanagement
Composants inductifs - Gestion de la fiabilité
L'IEC 62211:2017 établit une large base de critères électriques et mécaniques de procédures d’essais de défaillance. Le présent document est applicable aux composants inductifs (inductances de lissage et transformateurs) utilisant des matériaux magnétiques doux. Il s’agit des composants fondés essentiellement sur des tôles de fer laminées, de matériaux en poudre de fer (et alliages apparentés), ainsi que des ferrites et noyaux à bandes métalliques amorphes ou cristallines. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) Intégration du choc continu et du choc mécanique dans les conditions d’essai; b) Modification des références normatives dans le Tableau 3.
Induktivne komponente - Obvladovanje zanesljivosti
Ta dokument se uporablja za induktivne komponente (dušilke in transformatorje), ki temeljijo na mehkomagnetnih materialih. Te komponente temeljijo predvsem na laminiranih železnih ploščah, materialih iz železovega prahu (vključno z zlitinami) ter feritih in jedrih iz amorfnih ali kristalnih kovinskih pasov.
Sestavi navitja pomenijo sestave navitja žice ter večslojne in zlagalne tehnologije planarne tehnologije, vključno z zvitki, ki temeljijo na nemagnetnih materialih. Ta dokument obravnava tudi diskretne komponente in različne vrste površinsko montiranih induktivnih komponent (SMD).
V tem dokumentu je mogoče preveriti tudi zanesljivost sestavov induktivnih komponent, ki temeljijo na več tehnologijah, kot so lepljene vrste, vrste z objemkami (sponkami), impregnirane (premazane) vrste in (vakuumske) zalite vrste.
Naknadna določevanja se lahko uporabijo za primarno kvalifikacijo induktivnih komponent ali za vse načine preiskav prekvalifikacije (načrtovanje, obdelava, spreminjanje in proizvodnja). Uporabijo se lahko tudi za nadzorovanje izdelkov izven dejanskih proizvodnih postopkov.
Ta dokument postavlja široko osnovo električnih in mehanskih meril postopkov preskušanja odpovedi.
Če proizvajalci v tehničnih listih oglašujejo skladnost s tem standardom, lahko kupci zahtevajo podatke, ki dokazujejo skladnost s tem standardom. Kupci lahko zahtevajo tudi, da skladnost izdelka s tem standardom potrdi ustrezen organ.
Kupci in proizvajalci lahko izberejo dodatna merila za preskušanje in merila sprejemljivosti, ki se razlikujejo od meril, ki jih določa ta standard.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62211:2017
01-september-2017
1DGRPHãþD
SIST EN 62211:2004
Induktivne komponente - Obvladovanje zanesljivosti
Inductive components - Reliability management
Induktive Bauelemente - Zuverlässigkeitsmanagement
Composants inductifs - Gestion de la fiabilité
Ta slovenski standard je istoveten z: EN 62211:2017
ICS:
29.100.10 Magnetne komponente Magnetic components
SIST EN 62211:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62211:2017
---------------------- Page: 2 ----------------------
SIST EN 62211:2017
EUROPEAN STANDARD EN 62211
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2017
ICS 29.100.10 Supersedes EN 62211:2004
English Version
Inductive components - Reliability management
(IEC 62211:2017)
Composants inductifs - Gestion de la fiabilité Induktive Bauelemente - Zuverlässigkeitsmanagement
(IEC 62211:2017) (IEC 62211:2017)
This European Standard was approved by CENELEC on 2017-02-10. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62211:2017 E
---------------------- Page: 3 ----------------------
SIST EN 62211:2017
EN 62211:2017
European foreword
The text of document 51/1150/FDIS, future edition 2 of IEC 62211, prepared by IEC/TC 51 "Magnetic
components, ferrite and magnetic powder materials" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN 62211:2017.
The following dates are fixed:
(dop) 2017-11-10
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2020-02-10
standards conflicting with the
document have to be withdrawn
This document supersedes EN 62211:2004.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62211:2017 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60068-2-20 NOTE Harmonized as EN 60068-2-20.
IEC 60068-2-21 NOTE Harmonized as EN 60068-2-21.
IEC 60068-2-54 NOTE Harmonized as EN 60068-2-54.
IEC 60068-3-13 NOTE Harmonized as EN 60068-3-13.
2
---------------------- Page: 4 ----------------------
SIST EN 62211:2017
EN 62211:2017
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu
Publication Year Title EN/HD Year
IEC 60068-2-1 - Environmental testing - Part 2-1: Tests - EN 60068-2-1 -
Test A: Cold
IEC 60068-2-2 - Environmental testing - Part 2-2: Tests - EN 60068-2-2 -
Test B: Dry
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.