EN 60077-1:2002

Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules

Specifies the general service conditions and requirements for all electric equipment installed in power circuits, auxiliary circuits, control and indicating circuits etc., on rolling stock. Intends to harmonize as far as practicable all rules and requirements of a general nature applicable to electric equipment for rolling stock..

Bahnanwendungen - Elektrische Betriebsmittel auf Bahnfahrzeugen - Teil 1: Allgemeine Betriebsbedingungen und allgemeine Regeln

Applications ferroviaires - Equipements électriques du matériel roulant - Partie 1: Conditions générales de service et règles générales

Spécifie les conditions générales de service et les prescriptions pour l'ensemble de l'équipement electrique installé dans les circuits de traction, les circuits auxiliaires, les circuits de commande et de contrôle, etc., sur le matériel roulant.A pour objet d'harmoniser dans la mesure du possible l'ensemble des règles et des prescriptions de caractère général applicables aux équipements électriques du matériel roulant..

Železniške naprave – Električna oprema za vozna sredstva – 1. del: Splošni pogoji obratovanja in splošna pravila (IEC 60077-1:1999, spremenjen)

General Information

• Status: Withdrawn
• Publication Date: 02-May-2002
• Withdrawal Date: 28-Feb-2005
• ICS: 29.280 - Electric traction equipment
• Technical Committee: CLC/TC 9X - Electrical and electronic applications for railways
• Drafting Committee: CLC/SC 9XB - Electromechanical material on board rolling stock
• Parallel Committee: IEC/TC 9 - IEC_TC_9
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 04-Sep-2020
• Completion Date: 04-Sep-2020
• Mandate: M/024 - Mandate to CEN/CENELEC/ETSI for programming and standardization in the field of railway equipment
• Ref Project: SIST EN 60077-1:2003 - Railway applications - Electric equipment for rolling stock -- Part 1: General service conditions and general rules

Relations

• Replaced By: EN 60077-1:2017 - Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2003
äHOH]QLãNHQDSUDYH±(OHNWULþQDRSUHPD]DYR]QDVUHGVWYD±GHO6SORãQLSRJRML
REUDWRYDQMDLQVSORãQDSUDYLOD,(&VSUHPHQMHQ
Railway applications - Electric equipment for rolling stock -- Part 1: General service
conditions and general rules
Bahnanwendungen - Elektrische Betriebsmittel auf Bahnfahrzeugen -- Teil 1: Allgemeine
Betriebsbedingungen und allgemeine Regeln
Applications ferroviaires - Equipements électriques du matériel roulant -- Partie 1:
Conditions générales de service et règles générales
Ta slovenski standard je istoveten z: EN 60077-1:2002
ICS:
29.280 (OHNWULþQDYOHþQDRSUHPD Electric traction equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60077-1
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2002
ICS 29.280
English version
Railway applications -
Electric equipment for rolling stock
Part 1: General service conditions and general rules
(IEC 60077-1:1999, modified)
Applications ferroviaires -  Bahnanwendungen -
Equipements électriques Elektrische Betriebsmittel auf
du matériel roulant Bahnfahrzeuge
Partie 1: Conditions générales Teil 1: Allgemeine Betriebsbedingungen
de service et règles générales und allgemeine Regeln
(CEI 60077-1:1999, modifiée) (IEC 60077-1:1999, modifiziert)

This European Standard was approved by CENELEC on 2002-03-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60077-1:2002 E
Foreword
The text of the International Standard IEC 60077-1:1999, prepared by IEC TC 9, Electric
railway equipment, together with the common modifications prepared by SC 9XB,
Electromechanical material on board of rolling stock, of Technical Committee CENELEC TC 9X,
Electrical and electronic applications for railways, was submitted to the Unique Acceptance
Procedure and was approved by CENELEC as EN 60077-1 on 2002-03-01.

The following dates were fixed:

- latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2003-03-01

- latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2005-03-01

In this European Standard the common modifications to the International Standard are
indicated by a vertical line in the left margin of the text.

Subclauses, tables and figures which are additional to those in IEC 60077-1 are prefixed "Z".

Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, annex ZA is normative and annex A is informative.
Annex ZA has been added by CENELEC.
__________
- 3 - EN 60077-1:2002
Contents
Introduction.6
1 Scope.7
2 Normative references.7
3 Definitions .7
3.1 General.7
3.2 Circuits.8
3.3 Components.8
3.4 Test categories.8
3.5 Void.8
3.6 Characteristic quantities.9
4 Classification.9
5 Characteristics of the utilization category (see also annex A).10
5.1 Rated voltages.10
5.1.1 General.10
5.1.2 Rated operational voltage (U ).10
e
5.1.3 Rated insulation voltage (U ).10
Nm
5.1.4 Rated power frequency withstand voltage (U ) .11
5.1.5 Rated impulse voltage .11
5.2 Rated voltages for equipment.11
5.2.1 Supply from contact lines.11
5.2.2 Supply from a transformer .11
5.2.3 Supply from an independently driven generator/alternator or converter 11
5.2.4 Supply from a float charged battery.11
5.2.5 Supply from a battery.12
5.3 Rated currents for equipment .12
5.3.1 Rated operational current (I ).12
e
5.3.2 Rated short-time withstand current (I ).12
cw
5.4 Rated operational frequency.12
5.5 Rated air pressure .12
6 Product information.12
6.1 Nature of information .12
6.2 Marking.13
6.3 Instructions for storage, installation, operation and maintenance.13

7 Normal service conditions.13
7.1 Environmental conditions.13
7.2 Exposure to pollution .14
7.3 Exposure to overvoltages .14
8 Constructional and performance requirements.14
8.1 Constructional requirements.14
8.1.1 Electrical risks.14
8.1.2 Batteries.14
8.1.3 Electromagnetic compatibility (EMC).15
8.1.4 Fire protection.15
8.1.5 Other risks.15
8.2 Performance requirements.15
8.2.1 Operating conditions.15
8.2.2 Temperature rise.17
8.2.3 Operation following inactivity .19
8.2.4 Electromagnetic compatibility (EMC).21
8.2.5 Acoustic noise emission.21
8.2.6 Dielectric properties.21
8.2.7 Switching overvoltages.22
8.2.8 Operational performance.22
8.2.9 Ability to withstand vibration and shock .22
9 Tests.22
9.1 Kinds of tests .22
9.1.1 General.22
9.1.2 Type tests.23
9.1.3 Routine test.23
9.1.4 Sampling tests.24
9.1.5 Investigatory type tests .24
9.1.6 General test conditions .24
9.2 Verification of constructional requirements.24
9.2.1 General.24
9.2.2 Type tests.24
9.2.3 Routine tests.25
9.3 Verification of performance requirements.25
9.3.1 Operating limits.25
9.3.2 Temperature rise (Type test) .26
9.3.3 Dielectric properties.28
9.3.4 Operational performance capability .31

- 5 - EN 60077-1:2002
9.3.5 Vibration and shock .33
9.3.6 Electromagnetic compatibility.33
9.3.7 Acoustic noise emission.33
9.3.8 Climatic influence.34

Annex A (informative) Coordination between definitions .35
Annex ZA (normative) Normative references to international publications
with their corresponding European publications.37

Figures
Figure A.1.36
Figure A.2.36

Tables
Table 1  Temperature rise limits for insulating materials.19
Table 2  Temperature rise limits of terminals .20
Table 3  Temperature rise limits of accessible parts .21
Table 4  Dielectric tests on single pieces of equipment .30
Table 5  Dielectric tests for equipment connected to a.c. contact line .31

Introduction
Although this European Standard specifies the general service conditions and general rules
for electric equipment for rolling stock, further special details of certain types of traction
equipment may be given in other European standards. In particular, product standards give
further details. The product standards which are part of the EN 60077 series are:
IEC 60077: Railway applications – Electric equipment for rolling stock:
- Part 2: Electrotechnical components - General rules,
- Part 3: Electrotechnical components - Rules for d.c. cir
...