EN 61810-1:2004
(Main)Electromechanical elementary relays - Part 1: General and safety requirements
Electromechanical elementary relays - Part 1: General and safety requirements
Applies to electromechanical elementary relays (non-specified time all-or-nothing relays) and defines the basic safety-related and functional requirements for applications in all areas of electrical engineering or electronics.
Elektromechanische Elementarrelais (elektromechanische Schaltrelais ohne festgelegtes Zeitverhalten) - Teil 1: Allgemeine und sicherheitsgerichtete Anforderungen
Relais électromécaniques élémentaires - Partie 1: Exigences générales et de sécurité
Applies to electromechanical elementary relays (non-specified time all-or-nothing relays) and defines the basic safety-related and functional requirements for applications in all areas of electrical engineering or electronics.
Elektromehanski osnovni releji – 1. del: Splošne in varnostne zahteve
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 61810-1:2004
STANDARD
september 2004
Elektromehanski osnovni releji – 1. del: Splošne in varnostne zahteve
Electromechanical elementary relays -- Part 1: General and safety requirements
ICS 29.120.70 Referenčna številka
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
EUROPEAN STANDARD EN 61810-1
NORME EUROPÉENNE
EUROPÄISCHE NORM January 2004
ICS 29.120.70 Supersedes EN 61810-1:1998 & EN 61810-5:1998
English version
Electromechanical elementary relays
Part 1: General and safety requirements
(IEC 61810-1:2003)
Relais électromécaniques élémentaires Elektromechanische Elementarrelais
Partie 1: Exigences générales (elektromechanische Schaltrelais ohne
et de sécurité festgelegtes Zeitverhalten)
(CEI 61810-1:2003) Teil 1: Allgemeine und
sicherheitsgerichtete Anforderungen
(IEC 61810-1:2003)
This European Standard was approved by CENELEC on 2003-12-02. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61810-1:2004 E
Foreword
The text of document 94/182/FDIS, future edition 2 of IEC 61810-1, prepared by IEC TC 94,
All-or-nothing electrical relays, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 61810-1 on 2003-12-02.
This European Standard supersedes EN 61810-1:1998 and EN 61810-5:1998.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-09-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2008-12-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61810-1:2003 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 61810-1:2004
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1)
IEC 60038 (mod) 1983 IEC standard voltages HD 472 S1 1989
A1 1994 + A1 1995
A2 1997 + corr. February 2002
- -
IEC 60050 series International Electrotechnical - -
Vocabulary
IEC 60068-2-17 1994 Basic environmental testing procedures EN 60068-2-17 1994
Part 2: Tests - Test Q: Sealing
IEC 60068-2-20 1979 Part 2: Tests - Test T: Soldering
+ A2 1987 HD 323.2.20 S3 1988
IEC 60085 1984 Thermal evaluation and classification of HD 566 S1 1990
electrical insulation
IEC 60112 2003 Method for the determination of the EN 60112 2003
proof and the comparative tracking
indices of solid insulating materials
IEC 60364-4-44 2001 Electrical installations of buildings - -
Part 4-44: Protection for safety -
Protection against voltage disturbances
and electromagnetic disturbances
IEC 60417 data- Graphical symbols for use on - -
base equipment
IEC 60664-1 1992 Insulation coordination for equipment
+ A1 2000 within low-voltage systems
+ A2 2002 Part 1: Principles, requirements and EN 60664-1 2003
tests
IEC 60695-2-2 1991 Fire hazard testing EN 60695-2-2 1994
Part 2: Test methods –
Section 2: Needle-flame test
A1 1994 A1 1995
1)
The title of HD 472 S1 is: Nominal voltages for low-voltage public electricity supply systems.
Publication Year Title EN/HD Year
IEC 60695-2-10 2000 Part 2-10: Glowing/hot-wire based test EN 60695-2-10 2001
methods - Glow-wire apparatus and
common test procedure
2)
IEC 60695-10-2 1995 Part 10-2: Guidance and test methods - -
for the minimization of the effects of
abnormal heat on electrotechnical
products involved in fires - Method for
testing products made from non-metallic
materials for resistance to heat using
the ball pressure test
A1 2001 - -
IEC 60721-3-3 1994 Classification of environmental EN 60721-3-3 1995
conditions
Part 3: Classification of groups of
environmental parameters and their
severities –
Section 3: Stationary use at
weatherprotected locations
A1 1995 - -
A2 1996 A2 1997
IEC 60730-1 1999 Automatic electrical controls for EN 60730-1 2000
(mod) household and similar use A11 2002
Part 1: General requirements A12 2003
IEC 60947-5-1 1997 Low-voltage switchgear and controlgear EN 60947-5-1 1997
Part 5-1: Control circuit devices and A11 1997
A1 1999 switching elements - Electromechanical A1 1999
control circuit devices A12 1999
A2 1999 A2 2000
IEC 60950-1 2001 Information technology equipment - EN 60950-1 2001
(mod) Safety
Part 1: General requirements
IEC 60999-1 1999 Connecting devices - Electrical copper EN 60999-1 2000
conductors - Safety requirements for
screw-type and screwless-type
clamping units
Part 1: General requirements and
particular requirements for clamping
units for conductors from 0,2 mm² up to
35 mm² (included)
IEC 61210 (mod) 1993 Connecting devices - Flat quick-connect EN 61210 1995
terminations for electrical copper
conductors - Safety requirements
IEC 61760-1 1998 Surface mounting technology EN 61760-1 1998
Part 1: Standard method for the
specification of surface mounting
components (SMDs)
2)
IEC 60695-10-2 is superseded by IEC 60695-10-2:2003, which is harmonized as EN 60695-10-2:2003.
- 5 - EN 61810-1:2004
Publication Year Title EN/HD Year
IEC 61984 2001 Connectors - Safety requirements and EN 61984 2001
tests
INTERNATIONAL IEC
STANDARD 61810-1
Second edition
2003-08
Electromechanical elementary relays –
Part 1:
General and safety requirements
Relais électromécaniques élémentaires –
Partie 1:
Exigences générales et de sécurité
© IEC 2003 ⎯ Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale XB
International Electrotechnical Commission
ɆɟɠɞɭɧɚɪɨɞɧɚɹɗɥɟɤɬɪɨɬɟɯɧɢɱɟɫɤɚɹɄɨɦɢɫɫɢɹ
For price, see current catalogue
– 2 – 61810-1 © IEC:2003(E)
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references. 6
3 Terms and definitions . 8
3.1 Definitions related to general terms . 8
3.2 Definitions of relay types . 8
3.3 Definitions related to conditions and operations. 9
3.4 Definitions of operating values.12
3.5 Definitions related to contacts.13
3.6 Definitions related to accessories .15
3.7 Definitions related to insulation.16
4 Influence quantities.18
5 Rated values.18
5.1 Rated coil voltage/rated coil voltage range .19
5.2 Operative range.19
5.3 Release .19
5.4 Reset (bistable relays).19
5.5 Recommended number of cycles for electrical endurance.20
5.6 Recommended frequencies of operation .20
5.7 Contact loads .20
5.8 Ambient temperature .20
5.9 Categories of environmental protection.20
5.10 Duty factor.21
6 General provisions for testing .21
7 Documentation and marking .22
7.1 Data .22
7.2 Additional data.23
7.3 Marking .23
7.4 Symbols .24
8 Terminations.24
8.1 Screw terminals and screwless terminals.24
8.2 Flat quick-connect terminations .24
8.3 Solder terminals .25
8.3.1 Resistance to soldering heat.25
8.3.2 Solder pins .25
8.3.3 Terminals for surface mounting (SMD) .25
8.3.4 Other solder terminations (for example soldering lugs).25
8.4 Sockets .25
8.5 Alternative termination types.26
9 Sealing .26
10 Insulation resistance and dielectric strength.26
10.1 Preconditioning.26
10.2 Insulation resistance.26
10.3 Dielectric strength.27
61810-1 © IEC:2003(E) – 3 –
11 Heating.29
11.1 Requirements .29
11.2 Test procedure .29
11.3 Terminals .30
11.3.1 General test conditions .30
11.3.2 Solder terminals.30
11.3.3 Flat quick-connect terminations.31
11.3.4 Screw and screwless type terminals.31
11.3.5 Alternat
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.