EN IEC 61969-1:2020

Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 1: Design guidelines

IEC 61969-1:2020 is available as IEC 61969-1:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61969-1:2020 contains design guidelines for outdoor enclosures and is applicable over a wide field of mechanical, electromechanical and electronic equipment and its installation where a modular design is used. The objectives of this document are: - to provide an overview of specifications for enclosures focused on requirements for outdoor applications for stationary use at non-weather protected locations, and - to achieve product integrity under outdoor conditions and to ease product selection for the sourcing of outdoor enclosures from different vendors. This third edition cancels and replaces the second edition published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - alignment with the content of ETSI EN 300 019 and IEC 60721 series latest editions, particularly with the actualization of climate conditions; - new requirements added to reflect market requirements on environmental issues; - improvement on terminology and overall editorial improvement.

Mechanische Bauweisen für elektrische und elektronische Einrichtungen - Außengehäuse - Teil 1: Konstruktionsleitfaden

Structures mécaniques pour équipement électrique et électronique - Enveloppes de plein air - Partie 1: Lignes directrices pour la conception

IEC 61969-1:2020 est disponible sous forme de IEC 61969-1:2020 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L'IEC 61969-1:2020 fournit des lignes directrices pour la conception des enveloppes de plein air et s’applique à une grande variété d’équipements mécaniques, électromécaniques et électroniques et à leur installation en configuration modulaire. Le présent document est destiné: - à fournir une vue d’ensemble des spécifications applicables aux enveloppes, portant essentiellement sur les exigences propres aux applications de plein air pour une utilisation à poste fixe à des emplacements non protégés contres les intempéries, et - à assurer l’intégrité du produit dans des conditions extérieures et à faciliter le choix du produit lors de l’approvisionnement en enveloppes de plein air auprès des différents vendeurs. Cette troisième édition annule et remplace la deuxième édition parue en 2011. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - alignement sur le contenu de l’édition la plus récente des séries ETSI EN 300 019 et IEC 60721, en particulier concernant l’actualisation des conditions climatiques; - ajout de nouvelles exigences pour refléter celles du marché relatives aux questions environnementales; - amélioration de la terminologie et modifications éditoriales générales.

Mehanske strukture za električno in elektronsko opremo - Ohišja na prostem - 1. del: Smernice za projektiranje (IEC 61969-1:2020)

General Information

• Status: Published
• Publication Date: 02-Jul-2020
• ICS: 31.240 - Mechanical structures for electronic equipment
• Technical Committee: CLC/SR 48D - Mechanical structures for electronic equipment
• Drafting Committee: IEC/SC 48D - IEC_SC_48D
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 03-Jul-2020
• Completion Date: 03-Jul-2020
• Ref Project: SIST EN IEC 61969-1:2020 - Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 1: Design guidelines (IEC 61969-1:2020)

Relations

• Replaces: EN 61969-1:2012 - Mechanical structures for electronic equipment - Outdoor enclosures - Part 1: Design guidelines
• Effective Date: 07-Jul-2020
• Replaced By: EN IEC 61969-1:2023 - Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 1: Design guidelines
• Effective Date: 25-Nov-2021

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 61969-1:2020
01-september-2020
Nadomešča:
SIST EN 61969-1:2012
Mehanske strukture za električno in elektronsko opremo - Ohišja na prostem - 1.
del: Smernice za projektiranje (IEC 61969-1:2020)
Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part
1: Design guidelines (IEC 61969-1:2020)
Mechanische Bauweisen für elektronische Einrichtungen - Außengehäuse - Teil 1:
Konstruktionsleitfaden (IEC 61969-1:2020)
Structures mécaniques pour équipment électronique - Enveloppes de plein air - Partie 1:
Lignes directrices pour la conception (IEC 61969-1:2020)
Ta slovenski standard je istoveten z: EN IEC 61969-1:2020
ICS:
31.240 Mehanske konstrukcije za Mechanical structures for
elektronsko opremo electronic equipment
SIST EN IEC 61969-1:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61969-1:2020

---------------------- Page: 2 ----------------------
SIST EN IEC 61969-1:2020


EUROPEAN STANDARD EN IEC 61969-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2020
ICS 31.240 Supersedes EN 61969-1:2012 and all of its amendments
and corrigenda (if any)
English Version
Mechanical structures for electrical and electronic equipment -
Outdoor enclosures - Part 1: Design guidelines
(IEC 61969-1:2020)
Structures mécaniques pour équipement électrique et Mechanische Bauweisen für elektrische und elektronische
électronique - Enveloppes de plein air - Partie 1: Lignes Einrichtungen - Außengehäuse - Teil 1:
directrices pour la conception Konstruktionsleitfaden
(IEC 61969-1:2020) (IEC 61969-1:2020)
This European Standard was approved by CENELEC on 2020-06-16. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 61969-1:2020 E

---------------------- Page: 3 ----------------------
SIST EN IEC 61969-1:2020
EN IEC 61969-1:2020 (E)
European foreword
The text of document 48D/720/FDIS, future edition 3 of IEC 61969-1, prepared by SC 48D
"Mechanical structures for electrical and electronic equipment" of IEC/TC 48 "Electrical connectors
and mechanical structures for electrical and electronic equipment" was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN IEC 61969-1:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-03-16
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-06-16
document have to be withdrawn
This document supersedes EN 61969-1:2012 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 61969-1:2020 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60068-2-1 NOTE Harmonized as EN 60068-2-1
IEC 60068-2-2 NOTE Harmonized as EN 60068-2-2
IEC 60068-2-5 NOTE Harmonized as EN IEC 60068-2-5
IEC 60068-2-6 NOTE Harmonized as EN 60068-2-6
IEC 60068-2-10 NOTE Harmonized as EN 60068-2-10
IEC 60068-2-11 NOTE Harmonized as EN 60068-2-11
IEC 60068-2-14 NOTE Harmonized as EN 60068-2-14
IEC 60068-2-27 NOTE Ha
...