EN IEC 61587-6:2021

Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 6: Security aspects for indoor cabinets

IEC 61587-6:2021 specifies security aspects and security performance levels of the mechanical construction of indoor cabinets in accordance with IEC 60917 (all parts) and IEC 60297 (all parts). This document does not address vandalism. This second edition cancels and replaces the first edition published in 2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) Revised and expanded terms and definitions. b) Additional information in 4.2 Access security level of the cabinet. c) Revised requirements for Security performance levels of cabinets and added additional levels in Table 2 – Security performance levels of cabinets. d) Added a column for panel strength in Table 3 – Security performance levels of cabinet – mechanical. e) Revised test for mechanical lock (and hinges added) in 5.2.2 Tests for strength of mechanical locks and hinges. f) Added 5.2.4 Tests for panel strength. g) Added additional description of Key function in Table 5 – Security performance levels of key. h) Revised test method for handles in Annex A.

Mechanische Bauweisen für elektrische und elektronische Einrichtungen - Prüfungen für die Reihen IEC 60917 und IEC 60297 - Teil 6: Sicherheitsaspekte für Innenraumschränke

Structures mécaniques pour équipements électriques et électroniques - Essais pour les séries IEC 60917 et IEC 60297 - Partie 6: Aspects liés à la sécurité des baies intérieures

IEC 61587-6:2021 précise les aspects de sécurité et les niveaux de performance en matière de sécurité de la construction mécanique d’armoires intérieures conformément à l’IEC 60917 (toutes pièces) et à l’IEC 60297 (toutes pièces). Ce document ne traitent pas du vandalisme. Cette deuxième édition annule et remplace la première édition publiée en 2017. Cette édition constitue une révision technique. Cette édition comprend les changements techniques importants suivants par rapport à l’édition précédente : a) Termes et définitions révisés et élargis. b) Informations supplémentaires dans le niveau de sécurité d’accès 4.2 du cabinet. c) Révision des exigences relatives aux niveaux de rendement en matière de sécurité des armoires et ajout de niveaux supplémentaires au tableau 2 – Niveaux de rendement en matière de sécurité des armoires. d) Ajout d’une colonne pour la résistance du panneau dans le tableau 3 – Niveaux de performance de sécurité de l’armoire – mécanique. e) Essai révisé pour serrure mécanique (et charnières ajoutées) dans 5.2.2 Essais de résistance des serrures et charnières mécaniques. f) Ajout de 5.2.4 Tests pour la résistance du panneau. g) Ajout d’une description supplémentaire de la fonction clé dans le tableau 5 – Niveaux de performance de sécurité de la clé. h) Méthode d’essai révisée pour les poignées à l’annexe A.

Mehanske strukture za električno in elektronsko opremo - Preskušanje za skupini standardov IEC 60917 in IEC 60297 - 6. del: Varnostni vidiki za notranje omarice (IEC 61587-6:2021)

General Information

• Status: Published
• Publication Date: 20-May-2021
• ICS: 31.240 - Mechanical structures for electronic equipment
• Technical Committee: CLC/SR 48D - Mechanical structures for electronic equipment
• Drafting Committee: IEC/SC 48D - IEC_SC_48D
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 21-May-2021
• Completion Date: 21-May-2021
• Ref Project: SIST EN IEC 61587-6:2021 - Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 6: Security aspects for indoor cabinets (IEC 61587-6:2021)

Relations

• Replaces: EN 61587-6:2017 - Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 6: Security aspects for indoor cabinets
• Effective Date: 25-May-2021

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 61587-6:2021
01-julij-2021
Nadomešča:
SIST EN 61587-6:2017
Mehanske strukture za električno in elektronsko opremo - Preskušanje za skupini
standardov IEC 60917 in IEC 60297 - 6. del: Varnostni vidiki za notranje omarice
(IEC 61587-6:2021)
Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and
IEC 60297 series - Part 6: Security aspects for indoor cabinets (IEC 61587-6:2021)
Mechanische Bauweisen für elektrische und elektronische Einrichtungen - Prüfungen für
die Reihen IEC 60917 und IEC 60297 - Teil 6: Sicherheitsaspekte für
Innenraumschränke (IEC 61587-6:2021)
Structures mécaniques pour équipements électriques et électroniques - Essais pour les
séries IEC 60917 et IEC 60297 - Partie 6 : Aspects liés à la sécurité des baies intérieures
(IEC 61587-6:2021)
Ta slovenski standard je istoveten z: EN IEC 61587-6:2021
ICS:
31.240 Mehanske konstrukcije za Mechanical structures for
elektronsko opremo electronic equipment
SIST EN IEC 61587-6:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61587-6:2021

---------------------- Page: 2 ----------------------
SIST EN IEC 61587-6:2021


EUROPEAN STANDARD EN IEC 61587-6

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2021
ICS 31.240 Supersedes EN 61587-6:2017 and all of its amendments
and corrigenda (if any)
English Version
Mechanical structures for electrical and electronic equipment -
Tests for IEC 60917 and IEC 60297 series - Part 6: Security
aspects for indoor cabinets
(IEC 61587-6:2021)
Structures mécaniques pour équipements électriques et Mechanische Bauweisen für elektrische und elektronische
électroniques - Essais pour les séries IEC 60917 et IEC Einrichtungen - Prüfungen für die Reihen IEC 60917 und
60297 - Partie 6: Aspects liés à la sécurité des baies IEC 60297 - Teil 6: Sicherheitsaspekte für
intérieures Innenraumschränke
(IEC 61587-6:2021) (IEC 61587-6:2021)
This European Standard was approved by CENELEC on 2021-05-17. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 61587-6:2021 E

---------------------- Page: 3 ----------------------
SIST EN IEC 61587-6:2021
EN IEC 61587-6:2021 (E)
European foreword
The text of document 48D/736/FDIS, future edition 2 of IEC 61587-6, prepared by SC 48D
"Mechanical structures for electrical and electronic equipment" of IEC/TC 48 "Electrical connectors
and mechanical structures for electrical and electronic equipment" was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN IEC 61587-6:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-02-17
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-05-17
document have to be withdrawn
This document supersedes EN 61587-6:2017 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 61587-6:2021 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
ISO/IEC 27001 NOTE H
...