EN 61010-2-020:2006

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges

This Part 2 is applicable to electrically powered LABORATORY CENTRIFUGES.

Sicherheitsbestimmungen für elektrische Mess-, Steuer-, Regel- und Laborgeräte - Teil 2-020: Besondere Anforderungen an Laborzentrifugen

Règles de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-020: Exigences particulières pour centrifugeuses de laboratoire

La présente partie 2 est applicable aux CENTRIFUGEUSES DE LABORATOIRE alimentées en énergie électrique.

Varnostne zahteve za električno opremo za meritve, nadzor in laboratorijsko uporabo - 2-020. del: Posebne zahteve za laboratorijske centrifuge (IEC 61010-2-020:2006)

General Information

• Status: Withdrawn
• Publication Date: 17-Aug-2006
• Withdrawal Date: 30-Jun-2009
• ICS: 19.080 - Electrical and electronic testing
• ICS: 71.040.10 - Chemical laboratories. Laboratory equipment
• Technical Committee: CLC/TC 66X - Safety of measuring, control, and laboratory equipment
• Drafting Committee: IEC/TC 66 - IEC_TC_66
• Parallel Committee: IEC/TC 66 - IEC_TC_66
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 28-Apr-2020
• Completion Date: 28-Apr-2020
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Directive: 73/23/EEC - Electrical equipment designed for use within certain voltage limits
• Ref Project: SIST EN 61010-2-020:2007 - Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 2-020: Particular requirements for laboratory centrifuges

Relations

• Replaces: EN 61010-2-020:1994/A1:1996 - Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges
• Effective Date: 29-Jan-2023
• Replaces: EN 61010-2-020:1994 - Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges
• Effective Date: 29-Jan-2023
• Replaced By: EN 61010-2-020:2017 - Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2007
1DGRPHãþD
SIST EN 61010-2-020:1999
SIST EN 61010-2-020:1999/A1:1999
9DUQRVWQH]DKWHYH]DHOHNWULþQRRSUHPR]DPHULWYHQDG]RULQODERUDWRULMVNR
XSRUDERGHO3RVHEQH]DKWHYH]DODERUDWRULMVNHFHQWULIXJH,(&

Safety requirements for electrical equipment for measurement, control, and laboratory
use -- Part 2-020: Particular requirements for laboratory centrifuges
Sicherheitsbestimmungen für elektrische Mess-, Steuer-, Regel- und Laborgeräte -- Teil
2-020: Besondere Anforderungen an Laborzentrifugen
Règles de sécurité pour appareils électriques de mesurage, de régulation et de
laboratoire -- Partie 2-020: Exigences particulières pour centrifugeuses de laboratoire
Ta slovenski standard je istoveten z: EN 61010-2-020:2006
ICS:
19.080 (OHNWULþQRLQHOHNWURQVNR Electrical and electronic
SUHVNXãDQMH testing
71.040.10 Kemijski laboratoriji. Chemical laboratories.
Laboratorijska oprema Laboratory equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61010-2-020
NORME EUROPÉENNE
August 2006
EUROPÄISCHE NORM
ICS 19.080; 71.040.10 Supersedes EN 61010-2-020:1994 + A1:1996

English version
Safety requirements for electrical equipment
for measurement, control, and laboratory use
Part 2-020: Particular requirements
for laboratory centrifuges
(IEC 61010-2-020:2006)
Règles de sécurité pour appareils Sicherheitsbestimmungen für
électriques de mesurage, de régulation elektrische Mess-, Steuer-, Regel- und
et de laboratoire Laborgeräte
Partie 2-020: Exigences particulières Teil 2-020: Besondere Anforderungen
pour centrifugeuses de laboratoire an Laborzentrifugen
(CEI 61010-2-020:2006) (IEC 61010-2-020:2006)

This European Standard was approved by CENELEC on 2006-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61010-2-020:2006 E

Foreword
The text of document 66/367/FDIS, future edition 2 of IEC 61010-2-020, prepared by IEC TC 66, Safety
of measuring, control, and laboratory equipment, was submitted to the IEC-CENELEC parallel vote and
was approved by CENELEC as EN 61010-2-020 on 2006-07-01.
This European Standard supersedes EN 61010-2-020:1994 + A1:1996.
It has been updated to provide more specific wording for some of the instructions or subclauses, and the
language has been updated to reflect current terminology used in the industry today.
This Part 2-020 is to be used in conjunction with EN 61010-1:2001, Safety requirements for electrical
equipment for measurement, control and laboratory use – Part 1: General requirements. Consideration
may be given to future editions of, or amendments to, EN 61010-1.
This Part 2-020 supplements or modifies the corresponding clauses of EN 61010-1:2001 so as to convert
it into the European Standard "Safety requirements for laboratory centrifuges".
Where a particular clause or subclause of Part 1 is not mentioned in this Part 2-020, that clause or
subclause applies as far as is reasonable. Where this part states "addition", "modification" or
"replacement", the relevant text of Part 1 is to be adapted accordingly.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-07-01
In this standard:
1) the following print types are used:
– requirements: in roman type;
– NOTES: in small roman type;
– conformity and tests: italic type;
– terms used throughout this standard which have been defined in Clause 3: SMALL ROMAN
CAPITALS;
2) subclauses, figures, tables and notes which are additional to those in Part 1 are numbered starting
from 101; additional annexes are lettered AA, BB, etc.
Annex ZA has been added by CENELEC.
____________
Endorsement notice
The text of the International Standard IEC 61010-2-020:2006 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60034 NOTE  Harmonized as EN 60034 (Series) (not modified).
__________
- 3 - EN 61010-2-020:2006
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

Addition to annex ZA of EN 61010-1:
Publication Year Title EN/HD Year

ISO 3864 Series Graphical symbols - Safety colours and safety - -
signs
NORME CEI
INTERNATIONALE
IEC
61010-2-020
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2006-05
PUBLICATION GROUPÉE DE SÉCURITÉ
GROUP SAFETY PUBLICATION
Règles de sécurité pour appareils électriques
de mesurage, de régulation et de laboratoire –
Partie 2-020:
Exigences particulières pour centrifugeuses
de laboratoire
Safety requirements for electrical equipment
for measurement, control, and laboratory use –
Part 2-020:
Particular requirements for laboratory centrifuges

 IEC 2006 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photo-copie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
U
Commission Electrotechnique Internationale
PRICE CODE
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

61010-2-020  IEC:2006 – 3 –
CONTENTS
FOREWORD.5

1 Scope and object.9
2 Normative references .11
3 Terms and definitions .11
4 Tests .15
5 Marking and documentation.15
6 Protection against electric shock .21
7 Protection against mechanical HAZARDS.21
8 Mechanical resistance to shock and impact .35
9 Protection against the spread of fire .35
10 Equipment temperature limits and resistance to heat.35
11 Protection against HAZARDS from fluids .35
12 Protection against radiation, including laser sources, and against sonic and
ultrasonic pressure .37
13 Protection against liberated gases, explosion and implosion.37
14 Components .39
15 Protection by interlocks .39
16 Test and measurement equipment.39

Annexes .41
Annex H Index of defined terms .41
Annex AA (normative) Dynamic microbiological test method for BIOSEALS .43
Annex BB (informative) General guidance and rationale for particular subclauses .51

Bibliography.59

61010-2-020  IEC:2006 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR
MEASUREMENT, CONTROL, AND LABORATORY USE –

Part 2-020: Particular requirements for laboratory centrifuges

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61010-2-020 has been prepared by IEC technical committee 66,
Safety of measuring, control and laboratory equipment.
This second edition cancels and replaces the first edition published in 1992 and its
Amendment 1 (1996). It constitutes a technical revision. This second edition has been updated
to provide more specific wording for some of the instructions or subclauses, and the language
has been updated to reflect current terminology used in the Industry today.
It has the status of a group safety publication in accordance with IEC Guide 104.

--------
...