EN 61148:2012
(Main)Terminal markings for valve device stacks and assemblies and for power conversion equipment
Terminal markings for valve device stacks and assemblies and for power conversion equipment
IEC 61148:2011 is applicable to the terminal markings for the main circuits of valve device stacks and assemblies, and of integrated conversion equipment. The terminal markings refer to stacks, assemblies and equipment comprising semiconductor valve devices. The object of this standard is to specify a logical alphanumeric marking system for the identification of the external main terminals of the main power circuits in a stack, valve device assembly or integrated conversion equipment, which is applicable for the purpose of reference in circuit diagrams, catalogues, descriptions, and information exchange and storage. In the case of stacks and assemblies, alphanumeric terminal marking systems are indicated for those converter connections which are the most important and most commonly used ones. Terminal marking systems making use of graphic symbols or identifying colours are not considered in this standard. This second edition includes the following significant technical changes with respect to the previous edition: - the whole document has been rewritten according to the current Directives; - the identification codes were deleted according to the withdrawal of IEC 60971; - examples of terminal marking were added, especially for self-commutated converters.
Kennzeichnung der Anschlüsse von Ventilbauelement-Baugruppen und -Sätzen sowie von Stromrichtergeräten
Marquage des bornes de blocs et d'ensembles d'éléments de valve et d'équipement de conversion de puissance
La CEI 61148:2011 s'applique aux marquages des bornes des circuits principaux des blocs et des ensembles d'éléments de valve, ainsi qu'aux équipements intégrés de conversion. Le marquage des bornes se rapporte aux blocs, aux ensembles et aux équipements comprenant des éléments de valve à semiconducteurs. En ce qui concerne les blocs et les ensembles, les systèmes de marquage alphanumériques des bornes sont indiqués pour les montages de convertisseurs les plus importantes et les plus usuelles. Les systèmes de marquage de bornes qui se servent de symboles graphiques ou de couleurs ne sont pas pris en considération dans la présente norme. Cette deuxième édition présente les modifications techniques majeures suivantes par rapport à l'édition antérieure: - l'ensemble du document a été reformulé conformément aux Directives actuelles; - les codes d'identification ont été éliminés consécutivement à la suppression de la CEI 60971; - des exemples de marquages de bornes ont été ajoutés, en particulier pour les convertisseurs auto-commutés.
Oznake priključkov na modulih in sestavih elektronk in na opremi električnih pretvornikov
Ta mednarodni standard se uporablja za oznake priključkov za glavne tokokroge na modulih in sestavih elektronk ter na opremi integriranih pretvornikov. Oznake priključkov veljajo za module, sestave in opremo, ki jo sestavljajo polprevodne elektronke.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61148:2012
01-marec-2012
2]QDNHSULNOMXþNRYQDPRGXOLKLQVHVWDYLKHOHNWURQNLQQDRSUHPLHOHNWULþQLK
SUHWYRUQLNRY
Terminal markings for valve device stacks and assemblies and for power converter
equipment
Kennzeichnung der Anschlüsse von Ventilbauelement-Baugruppen und - sätzen sowie
von Stromrichtergeräten
Marquage des bornes de blocs et d'ensembles d'éléments de valve et d'équipement de
convertisseur de puissance
Ta slovenski standard je istoveten z: EN 61148:2012
ICS:
29.200 8VPHUQLNL3UHWYRUQLNL Rectifiers. Convertors.
6WDELOL]LUDQRHOHNWULþQR Stabilized power supply
QDSDMDQMH
SIST EN 61148:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61148:2012
---------------------- Page: 2 ----------------------
SIST EN 61148:2012
EUROPEAN STANDARD
EN 61148
NORME EUROPÉENNE
January 2012
EUROPÄISCHE NORM
ICS 29.200
English version
Terminal markings for valve device stacks and assemblies and for power
conversion equipment
(IEC 61148:2011)
Marquage des bornes de blocs et Kennzeichnung der Anschlüsse von
d'ensembles d'éléments de valve et Ventilbauelement-Baugruppen und -
d'équipement de conversion de puissance sätzen sowie von Stromrichtergeräten
(CEI 61148:2011) (IEC 61148:2011)
This European Standard was approved by CENELEC on 2011-11-24. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61148:2012 E
---------------------- Page: 3 ----------------------
SIST EN 61148:2012
EN 61148:2012 - 2 -
Foreword
The text of document 22/185/FDIS, future edition 2 of IEC 61148, prepared by IEC/TC 22 "Power
electronic systems and equipment" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 61148:2012.
The following dates are fixed:
(dop) 2012-08-24
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2014-11-24
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 61148:2011 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60445 NOTE Harmonized as EN 60445.
---------------------- Page: 4 ----------------------
SIST EN 61148:2012
- 3 - EN 61148:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60050-551 - International Electrotechnical Vocabulary - -
(IEV) -
Part 551: Power electronics
IEC 60146-1-1 - Semiconductor converters - EN 60146-1-1 -
General requirements and line commutated
converters -
Part 1-1: Speci
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.