EN IEC 61754-4:2022
(Main)Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4: Type SC connector family
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4: Type SC connector family
This part of IEC 61754 specifies the standard interface dimensions for type SC family of connectors.
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Steckgesichter von Lichtwellenleiter-Steckverbindern - Teil 4: Steckverbinderfamilie der Bauart SC
Dispositifs d’interconnexion et composants passifs fibroniques - Interfaces de connecteurs fibroniques - Partie 4: Famille de connecteurs de type SC
IEC 61754-4:2022 est disponible sous forme de IEC 61754-4:2022 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L'IEC 61754-4:2022 spécifie les dimensions d'interfaces normalisées pour la famille de connecteurs de type SC. La présente troisième édition annule et remplace la deuxième édition publiée en 2013, et constitue une révision technique. La présente édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - ajout de la méthode d'essai de l'IEC 61300-3-22 sur la force de compression de la férule; - ajout de l'Annexe A (informative) avec les exigences relatives aux dimensions des découpes pour réaliser les essais de résistance des raccords montés.
Optični spojni elementi in pasivne komponente - Vmesniki za optične konektorje - 4. del: Konektorska družina vrste SC (IEC 61754-4:2022)
Ta del standarda IEC 61754 navaja standardne dimenzije vmesnikov za konektorsko družino vrste SC.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2022
Nadomešča:
SIST EN 61754-4:2014
SIST EN 61754-4:2014/AC:2015
Optični spojni elementi in pasivne komponente - Vmesniki za optične konektorje -
4. del: Konektorska družina vrste SC (IEC 61754-4:2022)
Fibre optic interconnecting devices and passive components - Fibre optic connector
interfaces - Part 4: Type SC connector family (IEC 61754-4:2022)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Steckgesichter von
Lichtwellenleiter-Steckverbindern - Teil 4: Steckverbinderfamilie der Bauart SC (IEC
61754-4:2022)
Dispositifs dinterconnexion et composants passifs à fibres optiques Interfaces de
connecteurs pour fibres optiques Partie 4: Famille de connecteurs du type SC (IEC
61754-4:2022)
Ta slovenski standard je istoveten z: EN IEC 61754-4:2022
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 61754-4
NORME EUROPÉENNE
EUROPÄISCHE NORM April 2022
ICS 33.180.20 Supersedes EN 61754-4:2013 and all of its amendments
and corrigenda (if any)
English Version
Fibre optic interconnecting devices and passive components -
Fibre optic connector interfaces - Part 4: Type SC connector
family
(IEC 61754-4:2022)
Dispositifs d'interconnexion et composants passifs Lichtwellenleiter - Verbindungselemente und passive
fibroniques - Interfaces de connecteurs fibroniques - Bauteile - Steckgesichter von Lichtwellenleiter-
Partie 4: Famille de connecteurs de type SC Steckverbindern - Teil 4: Steckverbinderfamilie der Bauart
(IEC 61754-4:2022) SC
(IEC 61754-4:2022)
This European Standard was approved by CENELEC on 2022-04-04. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61754-4:2022 E
European foreword
The text of document 86B/4563/FDIS, future edition 3 of IEC 61754-4, prepared by SC 86B "Fibre
optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61754-4:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2023-01-04
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-04-04
document have to be withdrawn
This document supersedes EN 61754-4:2013 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61754-4:2022 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 61300-2-55 NOTE Harmonized as EN 61300-2-55
IEC 61755-3-1 NOTE Harmonized as EN 61755-3-1
IEC 61755-3-2 NOTE Harmonized as EN 61755-3-2
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61300-3-22 - Fibre optic interconnecting devices and EN 61300-3-22 -
passive components - Basic test and
measurement procedures - Part 3-22:
Examinations and measurements - Ferrule
compression force
IEC 61754-1 - Fibre optic interconnecting devices and EN 61754-1 -
passive components - Fibre optic
connector interfaces - Part 1: General and
guidance
IEC 61754-4 ®
Edition 3.0 2022-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components – Fibre optic
connector interfaces –
Part 4: Type SC connector family
Dispositifs d’interconnexion et composants passifs fibroniques – Interfaces de
connecteurs fibroniques –
Partie 4: Famille de connecteurs de type SC
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.20 ISBN 978-2-8322-1077-6
– 2 – IEC 61754-4:2022 © IEC 2022
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Description . 6
5 Interfaces . 7
Annex A (informative) Panel dimensions . 35
A.1 General . 35
A.2 Simplex adaptor . 35
A.3 Duplex adaptor . 35
Bibliography . 37
Figure 1 – Simplex PC plug connector interface . 8
Figure 2 – Simplex adaptor connector interface . 11
Figure 3 – Pin gauge for adaptor . 12
Figure 4 – Duplex PC plug connector interface . 13
Figure 5 – Duplex adaptor connector interface . 16
Figure 6 – Simplex angled PC plug connector interface . 18
Figure 7 – Duplex angled PC plug connector interface . 20
Figure 8 – Simplex active device receptacle interface for angled PC connector plug . 23
Figure 9 – Simplex active device receptacle interface for PC connector plug . 26
Figure 10 – Duplex active device receptacle interface for angled PC connector plug. 29
Figure 11 – Duplex active device receptacle interface for PC connector plug . 32
Figure A.1 – Panel cut out . 35
Figure A.2 – Fixture cut out . 35
Table 1 – Interfaces . 7
Table 2 – Intermateability of interfaces . 7
Table 3 – Dimensions of the simplex PC plug connector interface . 9
Table 4 – Grade characteristics for simplex PC plug connector . 10
Table 5 – Dimensions of the simplex adaptor connector interface . 11
Table 6 – Grade characteristics for simplex adaptor connector . 12
Table 7 – Pin gauge dimensions . 12
Table 8 – Dimensions of the duplex PC plug connector interface . 14
Table 9 – Grade characteristics for duplex PC plug connector . 15
Table 10 – Dimensions of the duplex adaptor connector interface . 17
Table 11 – Grade of the duplex adaptor connector . 17
Table 12 – Dimensions of the simplex angled PC plug connector interfaces . 19
Table 13 – Dimensions of the duplex angled PC plug connector interfaces . 21
Table 14 – Dimensions of the simplex active device receptacle interface for angled PC
connector plug . 24
IEC 61754-4:2022 © IEC 2022 – 3 –
Table 15 – Alignment feature grade of the simplex active device receptacle interface
for angled PC connector plug . 25
Table 16 – Mechanical stop feature grade of the simplex active device receptacle
interface for angled PC connector plug . 25
Table 17 – Dimensions of the simplex active device receptacle interface for PC
connector plug . 27
Table 18 – Alignment feature grade of the simplex active device receptacle interface
for PC connector plug . 28
Table 19 – Mechanical stop feature grade of the simplex active device receptacle
interface for PC connector plug . 28
Table 20 – Dimensions of the duplex active device receptacle interface for angled PC
connector plug . 30
Table 21 – Alignment feature grade of the duplex active device receptacle interface for
angled PC connector plug . 31
Table 22 – Mechanical stop feature grade of the duplex active device receptacle
interface for angled PC connector plug . 31
Table 23 – Dimensions of the duplex active device receptacle interface for PC
connector plug . 33
Table 24 – Alignment feature grade of the duplex active device receptacle interface for
PC connector plug . 34
Table 25 – Mechanical stop feature grade of the duplex active device receptacle
interface for PC connector plug . 34
Table A.1 – Dimensions for simplex adaptor . 35
Table A.2 – Dimensions for duplex adaptor . 36
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.