EN 62077:2010
(Main)Fibre optic interconnecting devices and passive components - Fibre optic circulators - Generic specification
Fibre optic interconnecting devices and passive components - Fibre optic circulators - Generic specification
IEC 62077:2010(E) applies to fibre optic circulators, which are: - non-reciprocal optical devices; - passive components; - have three or more ports for directionally transmitting optical power. This standard establishes circulator requirements and quality assessment procedures. The changes with respect to the previous edition are listed as: - having substantially increased the number of terms; - having added an informative annex for examle of filtering technologies; - having deleted quality assessment procedures.
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Lichtwellenleiterzirkulatoren - Fachgrundspezifikation
Dispositifs d’interconnexion et composants passifs à fibres optiques - Circulateurs à fibres optiques - Spécification générique
La CEI 62077:2010 s'applique aux circulateurs utilisés dans le domaine des fibres optiques présentant toutes les caractéristiques suivantes: - ce sont dispositifs optiques non réciproques, dont chaque port est soit une fibre optique, soit un connecteur à fibres optiques; - ce sont des dispositifs passifs, conformément à la classification et à la définition données dans la CEI 62538; et - ils disposent d'au moins trois ports pour la transmission de la puissance optique de façon directionnelle. - Les modifications par rapport à l'édition antérieure concernent: - l'augmentation substantielle du nombre de termes; - l'ajout d'une annexe informative fournissant un exemple de technologies de filtrage; - la suppression des procédures d'évaluation de la qualité.
Optični spojni elementi in pasivne komponente - Optični cirkulatorji - Rodovna specifikacija (IEC 62077:2010)
Ta mednarodni standard velja za cirkulatorje, ki se uporabljajo na področju optike in imajo vse od naslednjih značilnosti: - so nevzajemni optični elementi, pri katerih so vsaka vrata optično vlakno ali konektor optičnih vlaken; so pasivni elementi v skladu z razvrščanjem in opredelitvijo, ki ju določa IEC 62538; - imajo tri ali več vrat za usmerjeni prenos optične moči.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2010
1DGRPHãþD
SIST EN 62077:2002
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH2SWLþQLFLUNXODWRUML5RGRYQD
VSHFLILNDFLMD ,(&
Fibre optic interconnecting devices and passive components - Fibre optic circulators -
Generic specification (IEC 62077:2010)
Lichtwellenleiter - Verbindungselemente und passive Bauteile -
Lichtwellenleiterzirkulatoren - Fachgrundspezifikation (IEC 62077:2010)
Dispositifs d’interconnexion et composants passifs à fibres optiques - Circulateurs à
fibres optiques - Spécification générique (CEI 62077:2010)
Ta slovenski standard je istoveten z: EN 62077:2010
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 62077
NORME EUROPÉENNE
May 2010
EUROPÄISCHE NORM
ICS 33.180.20 Supersedes EN 62077:2001
English version
Fibre optic interconnecting devices and passive components -
Fibre optic circulators -
Generic specification
(IEC 62077:2010)
Dispositifs d’interconnexion Lichtwellenleiter -
et composants passifs à fibres optiques - Verbindungselemente und passive
Circulateurs à fibres optiques - Bauteile - Lichtwellenleiterzirkulatoren -
Spécification générique Fachgrundspezifikation
(CEI 62077:2010) (IEC 62077:2010)
This European Standard was approved by CENELEC on 2010-05-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62077:2010 E
Foreword
The text of document 86B/2871/CDV, future edition 2 of IEC 62077, prepared by SC 86B, Fibre optic
interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 62077 on 2010-05-01.
This standard supersedes EN 62077:2001.
The changes with respect to EN 62077:2001 are listed below:
– having substantially increased the number of terms;
– having added an informative annex for example of filtering technologies;
– having deleted quality assessment procedures.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2011-02-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-05-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62077:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60869-1 NOTE Harmonized as EN 60869-1.
IEC 60874 series NOTE Harmonized in EN 60874 series (not modified).
IEC 61300-2 series NOTE Harmonized in EN 61300-2 series (not modified).
IEC 61300-3 series NOTE Harmonized in EN 61300-3 series (not modified).
IEC 61753 series NOTE Harmonized in EN 61753 series (not modified).
IEC 61754 series NOTE Harmonized in EN 61754 series (partially modified).
IEC 61754-2 NOTE Harmonized as EN 61754-2.
IEC 61754-4 NOTE Harmonized as EN 61754-4.
IEC 61754-13 NOTE Harmonized as EN 61754-13.
IEC 62005 series NOTE Harmonized in EN 62005 series (not modified).
__________
- 3 - EN 62077:2010
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60027 Series Letter symbols to be used in electrical EN 60027 Series
technology
IEC 60050-731 - International Electrotechnical - -
Vocabulary (IEV) -
Chapter 731: Optical fibre communication
IEC 60617 Data Base Graphical symbols for diagrams - -
IEC 60695-11-5 - Fire hazard testing - EN 60695-11-5 -
Part 11-5: Test flames - Needle-flame test
method - Apparatus, confirmatory test
arrangement and guidance
IEC 60825-1 - Safety of laser products - EN 60825-1 -
Part 1: Equipment classification and
requirements
IEC/TR 61282-9 - Fibre optic communication system design - -
guides -
Part 9: Guidance on polarization mode
dispersion measurements and theory
IEC 61300 Series Fibre optic interconnecting devices and EN 61300 Series
passive components - Basic test and
measurement procedures
IEC/TR 61930 - Fibre optic graphical symbology - -
IEC/TS 62538 - Categorization of optical devices - -
IEC Guide 102 - Electronic components - Specification - -
structures for quality assessment
(Qualification approval and capability
approval)
IECQ 01 - IEC Quality Assessment System for - -
Electronic Components (IECQ) - Basic Rules
IEC QC 001002-3 - IEC Quality Assessment System for - -
Electronic Components (IECQ) - Rules of
Procedure - Part 3: Approval procedures
ISO 129-1 - Technical drawings - Indication of dimensions - -
and tolerances -
Part 1: General principles
ISO 286-1 - ISO system of limits and fits - - -
Part 1: Bases of tolerances, deviations
and fits
ISO 1101 - Geometrical Product Specifications (GPS) - - -
Geometrical tolerancing - Tolerances of form,
orientation, location and run-out
Publication Year Title EN/HD Year
ISO 8601 - Data elements and interchange formats - - -
Information interchange - Representation of
dates and times
IEC 62077 ®
Edition 2.0 2010-02
INTERNATIONAL
STANDARD
Fibre optic interconnecting devices and passive components – Fibre optic
circulators – Generic specification
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
T
ICS 33.180.20 ISBN 2-8318-1079-5
– 2 – 62077 © IEC:2010(E)
CONTENTS
FOREWORD.4
1 Scope.6
2 Normative references .6
3 Terms and definitions .7
3.1 Basic terms .7
3.2 Component terms.8
3.3 Performance parameters .8
4 Requirements .10
4.1 Classification.10
4.1.1 General .10
4.1.2 Type.11
4.1.3 Style.11
4.1.4 Variant .12
4.1.5 Assessment level.12
4.1.6 Normative reference extensions .12
4.2 Documentation .13
4.2.1 Symbols .13
4.2.2 Specification system.13
4.2.3 Drawings .15
4.2.4 Test and measurements .15
4.2.5 Test reports .15
4.2.6 Instructions for use.16
4.3 Standardization system .16
4.3.1 Interface standards.16
4.3.2 Performance standards.16
4.3.3 Reliability standards .17
4.3.4 Interlinking .17
4.4 Design and construction .18
4.4.1 Materials .18
4.4.2 Workmanship.19
4.5 Quality .19
4.6 Performance.19
4.7 Identification and marking .19
4.7.1 General .19
4.7.2 Variant identification number .19
4.7.3 Component marking .19
4.7.4 Package marking.20
4.8 Packaging .20
4.9 Storage conditions .20
4.10 Safety .20
Annex A (informative) Example of technology of bulk circulator based on magneto-
optic effect.21
Annex B (informative) Example of application of the circulator .22
Bibliography.23
Figure 1 – Standard system .18
62077 © IEC:2010(E) – 3 –
Figure A.1 – An example of a circulator .21
Figure B.1 – An example of application of the circulator.22
Table 1 – Example of a typical circulator set classification .10
Table 2 – The IEC specification structure.13
Table 3 – Interlink matrix for standards .18
– 4 – 62077 © IEC:2010(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
FIBRE OPTIC CIRCULATORS – GENERIC SPECIFICATION
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committ
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.