EN 60317-69:2017
(Main)Specifications for particular types of winding wires - Part 69: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular aluminium wire, class 220
Specifications for particular types of winding wires - Part 69: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular aluminium wire, class 220
IEC 60317-69:2017(E) specifies the requirements of enamelled rectangular aluminium winding wire of class 220 with a dual coating. The underlying coating is based on polyester or polyesterimide resin, which may be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. The superimposed coating is based on polyamide-imide resin. The range of nominal conductor dimensions covered by this standard is: Minimum Maximum Width 2,0 mm 16,0 mm Thickness 0,80 mm 5,60 mm Wires of grade 1 and grade 2 are included in this part of IEC 60317 and apply to the complete range of conductors. The specified combinations of width and thickness as well as the specific ratio width/thickness are given in IEC 60317. This publication is to be read in conjunction with IEC 60317-0-9:2015 Keywords: insulated wires used for windings in electrical equipment, class 220
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 69: Mit Polyester oder Polyesterimid beschichteter, mit Polyamidimid lackierter Flachdraht aus Aluminium der Klasse 220
Spécifications pour types particuliers de fils de bobinage - Partie 69: Fil d’aluminium de section rectangulaire émaillé avec polyester ou polyestérimide et avec surcouche polyamide-imide, classe 220
IEC 60317-69:2017 spécifie les exigences relatives au fil de bobinage d’aluminium de section rectangulaire émaillé de classe 220 avec un double revêtement. Le revêtement sous-jacent est à base de résine polyester ou polyestérimide, qui peut être modifiée à condition de conserver la dénomination chimique de la résine d'origine et satisfaire à toutes les exigences spécifiées du fil. Le revêtement superposé est à base de résine polyamide-imide. La plage de dimensions nominales du conducteur couverte par la présente norme est la suivante: Minimal Maximal Largeur 2,0 mm 16,0 mm Epaisseur 0,80 mm 5,60 mm Les fils de grade 1 et de grade 2 sont inclus dans la présente partie de l'IEC 60317 et s’appliquent à la plage complète de conducteurs. Les combinaisons spécifiées de largeurs et d’épaisseurs ainsi que le rapport spécifique largeur/épaisseur sont donnés dans IEC IEC 60317-0-9:2015. Mots clés: fils isolés utilisés dans les enroulements des appareils électriques, classe 220
Specifikacije za posebne vrste navijalnih žic - 69. del: Aluminijasta žica s pravokotnim prerezom, emajlirana s poliamidimidom, prekrita s poliestrom ali poliesterimidom, razred 220 (IEC 60317-69:2017)
V ta del standarda IEC 60317 so vključene žice razreda 1 in 2 ter se uporabljajo za celoten nabor prevodnikov.
Navedene kombinacije širine in debeline ter določena razmerja med širino in debelino so podani v standardu IEC 60317-0-9.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60317-69:2017
01-junij-2017
Specifikacije za posebne vrste navijalnih žic - 69. del: Aluminijasta žica s
pravokotnim prerezom, emajlirana s poliamidimidom, prekrita s poliestrom ali
poliesterimidom, razred 220 (IEC 60317-69:2017)
Specifications for particular types of winding wires - Part 69: Polyester or polyesterimide
overcoated with polyamide-imide enamelled rectangular aluminium wire, class 220 (IEC
60317-69:2017)
Ta slovenski standard je istoveten z: EN 60317-69:2017
ICS:
29.060.10 Žice Wires
77.150.10 Aluminijski izdelki Aluminium products
SIST EN 60317-69:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60317-69:2017
---------------------- Page: 2 ----------------------
SIST EN 60317-69:2017
EUROPEAN STANDARD EN 60317-69
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2017
ICS 29.060.10
English Version
Specifications for particular types of winding wires -
Part 69: Polyester or polyesterimide overcoated with polyamide-
imide enamelled rectangular aluminium wire, class 220
(IEC 60317-69:2017)
Spécifications pour types particuliers de fils de bobinage - Technische Lieferbedingungen für bestimmte Typen von
Partie 69: Fil d'aluminium de section rectangulaire émaillé Wickeldrähten - Teil 69: Mit Polyester oder Polyesterimid
de polyester ou polyestérimide et avec surcouche beschichteter, mit Polyamidimid lackierter Flachdraht aus
polyamide-imide, classe 220 Aluminium der Klasse 220
(IEC 60317-69:2017) (IEC 60317-69:2017)
This European Standard was approved by CENELEC on 2017-02-24. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60317-69:2017 E
---------------------- Page: 3 ----------------------
SIST EN 60317-69:2017
EN 60317-69:2017
European foreword
The text of document 55/1571/CDV, future edition 1 of IEC 60317-69, prepared by
IEC/TC 55 "Winding wires" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 60317-69:2017.
The following dates are fixed:
(dop) 2017-11-24
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2020-02-24
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60317-69:2017 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60264 Series NOTE Harmonized as EN 60264 Series.
IEC 60317 Series NOTE Harmonized as EN 60317 Series.
IEC 60851 Series NOTE Harmonized as EN 60851 Series.
2
---------------------- Page: 4 ----------------------
SIST EN 60317-69:2017
EN 60317-69:2017
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments)
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.