EN 60034-2-2:2010

Rotating electrical machines - Part 2-2: Specific methods for determining separate losses of large machines from tests - Supplement to IEC 60034-2-1

IEC 60034-2-2:2010 applies to large rotating electrical machines and establishes additional methods of determining separate losses and to define an efficiency supplementing IEC 60034-2-1. These methods apply when full-load testing is not practical and result in a greater uncertainty.

Drehende elektrische Maschinen - Teil 2-2: Besondere Verfahren zur Bestimmung der Einzelverluste großer elektrischer Maschinen aus Prüfungen - Ergänzung zu IEC 60034-2-1

Machines électrique tournantes - Partie 2-2: Méthodes spécifiques pour déterminer les pertes séparées des machines de grande taille à partir d'essais - Complément à la CEI 60034-2-1

La CEI 60034-2-2:2010 s'applique à des machines électriques tournantes de grande taille et elle établit des méthodes supplémentaires pour la détermination des pertes séparées et qui sont destinées à définir un rendement, en complément de la CEI 60034-2-1. Ces méthodes s'appliquent lorsqu'un essai à pleine charge n'est pas possible ou qu'il présente une plus grande incertitude.

Električni rotacijski stroji - 2-2. del: Specifične metode za ugotavljanje posameznih izgub velikih strojev s preskušanjem - Dodatek k IEC 60034-2-1 (IEC 60034-2-2:2010)

Ta dokument vzpostavlja dodatne metode za ugotavljanje posameznih izgub ter opredelitev učinkovitosti, ki dopolnjujejo IEC 60034-2-1. Te metode veljajo, kadar preskušanje s polno obremenitvijo ni praktično in vodi do večje nezanesljivosti. Specifične opisane metode so: - Metoda s kalibracijo stroja. - Metoda z zakasnitvijo. - Kalorimetrična metoda.

General Information

• Status: Published
• Publication Date: 10-Jun-2010
• Withdrawal Date: 31-May-2013
• ICS: 29.160 - Rotating machinery
• Technical Committee: CLC/TC 2 - Rotating machinery
• Drafting Committee: IEC/TC 2 - IEC_TC_2
• Parallel Committee: IEC/TC 2 - IEC_TC_2
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 11-Jun-2010
• Completion Date: 11-Jun-2010
• Ref Project: SIST EN 60034-2-2:2010 - Rotating electrical machines - Part 2-2: Specific methods for determining separate losses of large machines from tests - Supplement to IEC 60034-2-1 (IEC 60034-2-2:2010)

Relations

• Replaced By: EN IEC 60034-2-2:2024 - Rotating electrical machines - Part 2-2: Specific methods for determining separate losses of large machines from tests - Supplement to IEC 60034-2-1
• Effective Date: 25-Nov-2021

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Drehende elektrische Maschinen - Teil 2-2: Besondere Verfahren zur Bestimmung der Einzelverluste großer elektrischer Maschinen aus Prüfungen - Ergänzung zu IEC 60034-2-1 (IEC 60034-2-2:2010)Machines électrique tournantes - Partie 2-2: Méthodes spécifiques pour déterminer les pertes séparées des machines de grande taille - complément à la Partie 2-1 (CEI 60034-2-2:2010)Rotating electrical machines - Part 2-2: Specific methods for determining separate losses of large machines from tests - Supplement to IEC 60034-2-1 (IEC 60034-2-2:2010)29.160.01Rotacijski stroji na splošnoRotating machinery in generalICS:Ta slovenski standard je istoveten z:EN 60034-2-2:2010SIST EN 60034-2-2:2010en,fr01-september-2010SIST EN 60034-2-2:2010SLOVENSKI
STANDARD



SIST EN 60034-2-2:2010



EUROPEAN STANDARD EN 60034-2-2 NORME EUROPÉENNE
EUROPÄISCHE NORM June 2010
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2010 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60034-2-2:2010 E
ICS 29.160
English version
Rotating electrical machines -
Part 2-2: Specific methods for determining separate losses of large machines from tests -
Supplement to IEC 60034-2-1 (IEC 60034-2-2:2010)
Machines électrique tournantes -
Partie 2-2: Méthodes spécifiques
pour déterminer les pertes séparées
des machines de grande taille
à partir d'essais -
Complément à la CEI 60034-2-1 (CEI 60034-2-2:2010)
Drehende elektrische Maschinen -
Teil 2-2: Besondere Verfahren
zur Bestimmung der Einzelverluste großer elektrischer Maschinen aus Prüfungen -
Ergänzung zu IEC 60034-2-1 (IEC 60034-2-2:2010)
This European Standard was approved by CENELEC on 2010-06-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 60034-2-2:2010



EN 60034-2-2:2010 - 2 - Foreword The text of document 2/1585/FDIS, future edition 1 of IEC 60034-2-2, prepared by IEC TC 2, Rotating machinery, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60034-2-2 on 2010-06-01. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2011-03-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2013-06-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 60034-2-2:2010 was approved by CENELEC as a European Standard without any modification. __________ SIST EN 60034-2-2:2010



- 3 - EN 60034-2-2:2010 Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60034-1 - Rotating electrical machines -
Part 1: Rating and performance EN 60034-1 -
IEC 60034-2-1 - Rotating electrical machines -
Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) EN 60034-2-1 -
SIST EN 60034-2-2:2010



SIST EN 60034-2-2:2010



IEC 60034-2-2Edition 1.0 2010-03INTERNATIONAL STANDARD NORME INTERNATIONALERotating electrical ma
...