FprEN IEC 62813:2024
(Main)Lithium ion capacitors for use in electric and electronic equipment - Test methods for electrical characteristics
Lithium ion capacitors for use in electric and electronic equipment - Test methods for electrical characteristics
Lithium-Ionen-Kondensatoren zur Verwendung in elektrischen und elektronischen Geräten - Prüfverfahren für die elektrischen Kennwerte
Condensateurs au lithium-ion destinés à être utilisés dans les équipements électriques et électroniques - Méthodes d'essai relatives aux caractéristiques électriques
Litij-ionski kondenzatorji za električno in elektronsko opremo - Metode za preskušanje električnih karakteristik
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 62813:2024
01-april-2024
Litij-ionski kondenzatorji za električno in elektronsko opremo - Metode za
preskušanje električnih karakteristik
Lithium ion capacitors for use in electric and electronic equipment - Test methods for
electrical characteristics
Lithium-Ionen-Kondensatoren zur Verwendung in elektrischen und elektronischen
Geräten - Prüfverfahren für die elektrischen Kennwerte
Condensateurs au lithium-ion destinés à être utilisés dans les équipements électriques
et électroniques - Méthodes d'essai relatives aux caractéristiques électriques
Ta slovenski standard je istoveten z: prEN IEC 62813:2024
ICS:
31.060.99 Drugi kondenzatorji Other capacitors
oSIST prEN IEC 62813:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN IEC 62813:2024
oSIST prEN IEC 62813:2024
40/3115/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62813 ED2
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-02-23 2024-05-17
SUPERSEDES DOCUMENTS:
40/3073/CD, 40/3104/CC
IEC TC 40 : CAPACITORS AND RESISTORS FOR ELECTRONIC EQUIPMENT
SECRETARIAT: SECRETARY:
Netherlands Mr Ronald Drenthen
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is
the final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Lithium ion capacitors for use in electric and electronic equipment - Test methods for
electrical characteristics
PROPOSED STABILITY DATE: 2034
NOTE FROM TC/SC OFFICERS:
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it,
for any other purpose without permission in writing from IEC.
oSIST prEN IEC 62813:2024
IEC CDV 62813 © IEC 2024 – 2 – 40/3115/CDV
1 CONTENTS
2 FOREWORD . 3
3 1 Scope . 5
4 2 Normative references . 5
5 3 Terms and definitions . 5
6 4 Test methods . 8
7 4.1 Test requirements . 8
8 4.1.1 Standard atmospheric conditions for tests . 8
9 4.1.2 Standard atmospheric conditions for measurements . 8
10 4.1.3 Pre-conditioning . 9
11 4.2 Measurement . 9
12 4.2.1 Capacitance, discharge accumulated electric energy, and internal
13 resistance . 9
14 4.2.2 Measurement for voltage maintenance rate . 11
15 4.3 Calculation . 13
16 4.3.1 Calculation of capacitance and discharge accumulated electric energy . 13
17 4.3.2 Calculation of internal resistance . 14
18 4.3.3 Calculation of voltage maintenance rate . 14
19 Annex A (informative) Endurance test (continuous application of rated voltage at high
20 temperature) . 16
21 A.1 General . 16
22 A.2 Test procedure . 16
23 A.2.1 Test conditions . 16
24 A.2.2 Test procedure . 16
25 A.2.3 Requirements . 16
26 Annex B (informative) Calculation of the measuring currents based on the propagated
27 error . 18
28 B.1 General . 18
29 B.2 Measurement propagated error and measuring currents . 18
30 Annex C (informative) Procedures for defining the measuring current of LIC with
31 uncertain nominal internal resistance . 21
32 C.1 General . 21
33 C.2 Defining procedures of measuring current for LIC . 21
34 Bibliography . 22
36 Figure 1 – Basic circuit for measuring capacitance, discharge accumulated electric
37 energy, and internal resistance . 10
38 Figure 2 – Voltage profile for measuring capacitance, discharge accumulated electric
39 energy, and internal resistance . 11
40 Figure 3 – Basic circuit for measuring the voltage maintenance rate . 12
41 Figure 4 – Voltage profile for measuring voltage maintenance rate . 13
42 Figure C.1 – Flowchart of current setting procedures . 21
oSIST prEN IEC 62813:2024
IEC CDV 62813 © IEC 2024 – 3 – 40/3115/CDV
45 INTERNATIONAL ELECTROTECHNICAL COMMISSION
46 ____________
48 LITHIUM ION CAPACITORS FOR USE
49 IN ELECTRIC AND ELECTRONIC EQUIPMENT –
50 TEST METHODS FOR ELECTRICAL CHARACTERISTICS
52 FOREWORD
53 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
54 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
55 international co-operation on all questions concerning standardization in the electrical and electronic fields. To
56 this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
57 Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
58 Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
59 in the subject dealt with may participate in this preparatory work. International, governmental and non-
60 governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
61 with the International Organization for Standardization (ISO) in accordance with conditions determined by
62 agreement between the two organizations.
63 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
64 consensus of opinion on the relevant subjects since each technical committee has representation from all
65 interested IEC National Committees.
66 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
67 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
68 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
69 misinterpretation by any end user.
70 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
71 transparently to the maximum extent possible in their national and regional publications. Any divergence
72 between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
73 the latter.
74 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
75 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
76 services carried out by independent certification bodies.
77 6) All users should ensure that they have the latest edition of this publication.
78 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
79 members of its technical committees and IEC National Committees for any personal injury, property damage or
80 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
81 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
82 Publications.
83 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
84 indispensable for the correct application of this publication.
85 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
86 patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
87 IEC 62813 has been prepared by IEC technical committee 40: Capacitors and resistors for
88 electronic equipment. It is an International Standard.
89 This second edition cancels and replaces the first edition published in 2015.
90 This edition includes the following changes with respect to the previous edition:
91 a) The document has been restructured to comply with the ISO/IEC Directives, Part 2.
92 b)
oSIST prEN IEC 62813:2024
IEC CDV 62813 © IEC 2024 – 4 – 40/3115/CDV
94 The text of this International Standard is based on the following documents:
Draft Report on voting
XX/XX/FDIS XX/XX/RVD
96 Full information on the voting for its approval can be found in the report on voting indicated in
97 the above table.
98 The language used for the development of this International Standard is English.
99 This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
100 accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
101 at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
102 described in greater detail at www.iec.ch/publications.
103 The committee has decided that the contents of this document will remain unchanged until the
104 stability date indicated on the IEC website under webstore.iec.ch in the data related to the
105 specific document. At this date, the document will be
106 • reconfirmed,
107 • withdrawn,
108 • replaced by a revised edition, or
109 • amended.
oSIST prEN IEC 62813:2024
IEC CDV 62813 © IEC 2024 – 5 – 40/3115/CDV
112 LITHIUM ION CAPACITORS FOR USE
113 IN ELECTRIC AND ELECTRONIC EQUIPMENT –
114 TEST METHODS FOR ELECTRICAL CHARACTERISTICS
118 1 Scope
119 This International Standard specifies the electrical characteristics (capacitance, internal
120 resistance, discharge accumulated electric energy, and voltage maintenance rate) test methods
121 of lithium ion capacitors (LIC) for use in electric and electronic equipment.
122 2 Normative references
123 The following documents are referred to in the text in such a way that some or all of their content
124 constitutes requirements of this document. For dated references, only the edition cited applies.
125 For undated references, the latest edition of the referenced document (including any
126 amendments) applies.
127 IEC 60068-1:2013, Environmental testing – Part 1: General and guidance
128 3 Terms and definitions
129 For the purposes of this document, the following terms and definitions apply.
130 ISO and IEC maintain terminology databases for use in standardization at the following
131 addresses:
132 • IEC Electropedia: available at https://www.electropedia.org/
133 • ISO Online browsing platform: available at https://www.iso.org/obp
134 3.1
135 upper category temperature
136 highest ambient temperature including internal heating in which a LIC is designed to operate
137 continuously
138 [SOURCE: IEC 61881-3:2012, 3.17, modified – The note to entry has been deleted.]
139 3.2
140 rated voltage
141 U
R
142 maximum direct current (DC) voltage that may be applied continuously for a certain time
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.