EN 62841-3-1:2014/A12:2021

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws

2019-11-14: this prAA represents common mods. to EN 62841-3-1:2014/prA1 (PR=70783)
D164/C043: DOW= DOR+48 months

Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 3-1: Besondere Anforderungen für transportable Tischkreissägen

Outils électroportatifs à moteur, outils transportables et machines pour jardins et pelouses - Sécurité - Partie 3-1: Exigences particulières pour les scies circulaires à table transportables

No scope available

Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 3-1. del: Posebne zahteve za prenosne namizne žage - Dopolnilo A12

General Information

• Status: Published
• Publication Date: 10-Jun-2021
• ICS: 25.140.20 - Electric tools
• Technical Committee: CLC/TC 116 - Safety of hand-held motor-operated electric tools
• Drafting Committee: CLC/TC 116 - Safety of hand-held motor-operated electric tools
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 11-Jun-2021
• Completion Date: 11-Jun-2021
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN 62841-3-1:2014/A12:2021 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws

Relations

• Amends: EN 62841-3-1:2014 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified)
• Effective Date: 07-Dec-2021
• Amends: EN 62841-3-1:2014/A1:2021 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws
• Effective Date: 19-Nov-2019

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2021
Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 3-
1. del: Posebne zahteve za prenosne namizne žage - Dopolnilo A12
Electric motor-operated hand-held tools, transportable tools and lawn and garden
machinery - Safety - Part 3-1: Particular requirements for transportable table saws
Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und
Rasen- und Gartenmaschinen - Sicherheit - Teil 3-1: Besondere Anforderungen für
transportable Tischkreissägen
Outils électroportatifs à moteur, outils transportables et machines pour jardins et
pelouses - Sécurité - Partie 3-1: Exigences particulières pour les scies circulaires à table
transportables
Ta slovenski standard je istoveten z: EN 62841-3-1:2014/A12:2021
ICS:
25.080.60 Strojne žage Sawing machines
25.140.20 Električna orodja Electric tools
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 62841-3-1:2014/A12

NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2021
ICS 25.140.20
English Version
Electric motor-operated hand-held tools, transportable tools and
lawn and garden machinery - Safety - Part 3-1: Particular
requirements for transportable table saws
Outils électroportatifs à moteur, outils transportables et Elektrische motorbetriebene handgeführte Werkzeuge,
machines pour jardins et pelouses - Sécurité - Partie 3-1: transportable Werkzeuge und Rasen- und
Exigences particulières pour les scies circulaires à table Gartenmaschinen - Sicherheit - Teil 3-1: Besondere
transportables Anforderungen für transportable Tischkreissägen
This amendment A12 modifies the European Standard ; it was approved by CENELEC on 2021-03-12. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the status of a national
standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62841-3-1:2014/A12:2021 E

European foreword
This document (EN 62841-3-1:2014/A12:2021) has been prepared by CLC/TC 116 “Safety and
environmental aspects of motor-operated electric tools”.
The following dates are fixed:
• latest date by which this document has (dop) 2022-03-12
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2025-03-12
standards conflicting with this document
have to be withdrawn
This document amends EN 62841-3-1:2014/A1:2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission and
the European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this
document.
1 Modification to Clause 1, “Scope”
Add the following to the existing Clause 1:
“This document covers all significant hazards, hazardous situations or hazardous events relevant for
machines covered by this standard.
NOTE Z101 Essential requirements not mentioned in Table ZZ.1 are deemed to be not applicable, because the
corresponding hazards are either not relevant for machines covered by this standard or do not require specific action
by the designer.”
2 Modification to Clause 8, “Marking and instructions”
In subclause 8.2, delete NOTE 101.
3 Replacement of the Annex ZA, “Normative references to international
publications with their corresponding European publications”
Replace the existing Annex ZA with the following:
"Annex ZA
(normative)
Normative references to international publications with their corresponding
European publications
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Annex ZA of EN 62841-1:2015 is applicable, except as follows:
Publication Year Title EN/HD Year
Addition:
ISO 180 2019 Plastics - Determination of Izod impact EN ISO 180 2019
strength
"
...