EN 60745-2-21:2009

Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for drain cleaners

Deals with the safety of tools which the rated voltage is not more than 250 V for single-phase a.c. or d.c. tools and 440 V for three-phase a.c. tools. Supplements or modifies the corresponding clauses of IEC 60745-1

Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-21: Besondere Anforderungen für Rohrreinigungsgeräte

Outils électroportatifs à moteur - Sécurité - Partie 2-21: Règles particulières pour les curettes

Traite de la sécurité des outils dont la tension assignée n'est pas supérieure à 250 V en courant monophasé alternatif ou courant continu et 440 V en courant alternatif triphasé. Complète ou modifie les articles correspondants de la CEI 60745-1.

Električna ročna orodja - Varnost - 2-21. del: Posebne zahteve za čistilnike odtokov (IEC 60745-2-21:2002, spremenjen)

General Information

• Status: Withdrawn
• Publication Date: 21-Jul-2009
• Withdrawal Date: 30-Apr-2010
• ICS: 25.140.20 - Electric tools
• ICS: 91.140.70 - Sanitary installations
• Technical Committee: CLC/TC 116 - Safety of hand-held motor-operated electric tools
• Drafting Committee: IEC/TC 116 - Safety of hand-held motor-operated electric tools
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 31-May-2023
• Completion Date: 31-May-2023
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN 60745-2-21:2009 - Hand-held motor-operated electric tools - Safety -- Part 2-21: Particular requirements for drain cleaners

Relations

• Replaces: EN 60745-2-21:2007 - Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for drain cleaners
• Effective Date: 28-Jan-2023
• Replaced By: EN 62841-2-21:2019 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-21: Particular requirements for hand-held drain cleaners
• Effective Date: 04-Jun-2019
• Amended By: EN 60745-2-21:2009/A1:2010 - Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for drain cleaners
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60745-2-21:2009
01-december-2009
1DGRPHãþD
SIST EN 60745-2-21:2008
(OHNWULþQDURþQDRURGMD9DUQRVWGHO3RVHEQH]DKWHYH]DþLVWLOQLNHRGWRNRY
,(&VSUHPHQMHQ
Hand-held motor-operated electric tools - Safety -- Part 2-21: Particular requirements for
drain cleaners
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit -- Teil 2-21: Besondere
Anforderungen für Rohrreinigungsgeräte
Outils électroportatifs à moteur - Sécurité -- Partie 2-21: Règles particulières pour les
curettes
Ta slovenski standard je istoveten z: EN 60745-2-21:2009
ICS:
25.140.20 (OHNWULþQDRURGMD Electric tools
91.140.70 Sanitarne naprave Sanitary installations
SIST EN 60745-2-21:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60745-2-21:2009

---------------------- Page: 2 ----------------------

SIST EN 60745-2-21:2009

EUROPEAN STANDARD
EN 60745-2-21

NORME EUROPÉENNE
July 2009
EUROPÄISCHE NORM

ICS 25.140.20; 91.140.70 Supersedes EN 60745-2-21:2007


English version


Hand-held motor-operated electric tools -
Safety -
Part 2-21: Particular requirements for drain cleaners
(IEC 60745-2-21:2002, modified)


Outils électroportatifs à moteur -  Handgeführte motorbetriebene
Sécurité - Elektrowerkzeuge -
Partie 2-21: Règles particulières Sicherheit -
pour les curettes Teil 2-21: Besondere Anforderungen
(CEI 60745-2-21:2002, modifiée) für Rohrreinigungsgeräte
(IEC 60745-2-21:2002, modifiziert)




This European Standard was approved by CENELEC on 2009-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels


© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60745-2-21:2009 E

---------------------- Page: 3 ----------------------

SIST EN 60745-2-21:2009
- 2 - EN 60745-2-21:2009
Foreword
The text of the International Standard IEC 60745-2-21:2002, prepared by SC 61F (transformed into
IEC TC 116, Safety of hand-held motor-operated electric tools), together with the common
modifications prepared by the Technical Committee CENELEC TC 61F (transformed into TC 116),
was submitted to the Unique Acceptance Procedure and was approved as EN 60745-2-21 on
2007-05-01.
A draft amendment (prAA), extending Annex ZZ to include the new MD 2006/42/EC, was submitted to
the formal vote.
The combined texts were approved by CENELEC as a new edition of EN 60745-2-21 on 2009-07-01.
This European Standard supersedes EN 60745-2-21:2007.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-05-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-05-01
This standard is divided into two parts:
Part 1: General requirements which are common to most hand-held electric motor operated tools (for
the purpose of this standard referred to simply as tools) which could come within the scope of
this standard;
Part 2: Requirements for particular types of tools which either supplement or modify the requirements
given in Part 1 to account for the particular hazards and characteristics of these specific tools.
This European Standard has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association and covers essential requirements of
EC Directive 98/37/EC (Machinery Directive), amended by Directive 98/79/EC, and of EC Directive
2006/42/EC. See Annex ZZA and Annex ZZB.
Compliance with the clauses of Par
...