iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 50146:2000

(Main)

Cable ties for electrical installations

Cable ties for electrical installations

Superseded by EN 62275:2009

Kabelbinder für elektrische Installationen

Colliers pour installations électriques

Cable ties for electrical installations

General Information

Status
Withdrawn
Publication Date
20-Feb-2000
Withdrawal Date
31-Jul-2002
ICS
29.120.20 - Connecting devices
Technical Committee
CLC/TC 213 - Cable management systems
Drafting Committee
IEC/SC 23A - IEC_SC_23A
Parallel Committee
IEC/SC 23A - IEC_SC_23A
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Jul-2012
Completion Date
01-Jul-2012
Directive
2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
73/23/EEC - Electrical equipment designed for use within certain voltage limits
Ref Project
SIST EN 50146:2000 - Cable ties for electrical installations

Relations

Replaced By
EN 62275:2009 - Cable management systems - Cable ties for electrical installations
Effective Date
29-Jan-2023

Buy Standard

EN 50146:2000EN 50146:2000
PreviousNext
Standard
EN 50146:2000
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50146:2000
01-junij-2000
Cable ties for electrical installations
Cable ties for electrical installations
Kabelbinder für elektrische Installationen
Colliers pour installations électriques
Ta slovenski standard je istoveten z: EN 50146:2000
ICS:
29.120.99 'UXJDHOHNWULþQDGRGDWQD Other electrical accessories
RSUHPD
SIST EN 50146:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50146:2000

---------------------- Page: 2 ----------------------

SIST EN 50146:2000

---------------------- Page: 3 ----------------------

SIST EN 50146:2000

---------------------- Page: 4 ----------------------

SIST EN 50146:2000

---------------------- Page: 5 ----------------------

SIST EN 50146:2000

---------------------- Page: 6 ----------------------

SIST EN 50146
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 61914:2021(Main)
Cable cleats for electrical installations
SIST EN IEC 61914:2022

This International Standard specifies requirements and tests for cable cleats used for securing cables in electrical installations and for intermediate restraints used for holding cables together in formation in electrical installations. Cable cleats provide resistance to electromechanical forces where declared. This document includes cable cleats that rely on a mounting surface specified by the manufacturer for axial and/or lateral retention of cables. Various types of cable cleats and intermediate restraints are shown in Annex A. NOTE Requirements for manufacturers in this document also apply to importers and responsible vendors where appropriate. This document does not apply to cable ties.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61534-21:2014/A1:2021(Amendment)
Powertrack systems - Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting
SIST EN 61534-21:2014/A1:2021

Not available

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61534-21:2014/A11:2021(Amendment)
Powertrack systems - Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting
SIST EN 61534-21:2014/A11:2021

2020-07-20: This prAA represents common mods to EN 61534-21:2014/prA1 (PR=72286)

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61534-22:2014/A1:2021(Amendment)
Powertrack systems - Part 22: Particular requirements for powertrack systems intended for onfloor or underfloor installation
SIST EN 61534-22:2014/A1:2021

Not available

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61534-22:2014/A11:2021(Amendment)
Powertrack systems - Part 22: Particular requirements for powertrack systems intended for onfloor or underfloor installation
SIST EN 61534-22:2014/A11:2021

2020-07-20: This prAA represents common mods to EN 61534-22:2014/prA1 (PR=72289)

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61914:2016(Main)
Cable cleats for electrical installations
SIST EN 61914:2016

IEC 61914:2015 is available as IEC 61914:2015 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 61914:2015 specifies requirements and tests for cable cleats and intermediate restraints used for securing cable in electrical installations. Cable cleats provide resistance to electromechanical forces where declared. This standard includes cable cleats that rely on a mounting surface specified by the manufacturer for axial and/or lateral retention of cables. This second edition cancels and replaces the first edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) Additional declaration and test for lateral load retention depending on cleat mounting orientation with associated new figures; b) Additional declaration of the distance between the cable centres in any short-circuit test and associated new figures; c) Specification of the cable to be used in short-circuit testing and relaxation of the ambient temperature limits for the test; d) Additional requirement to photograph the short-circuit test arrangement before and after the test and to record more complete details of the cable used; e) Revised parameters for the test of resistance to UV light. This edition also includes the following editorial changes with respect to the previous edition: f) Revised and updated normative references and bibliography; g) Editorial clarification of definitions; h) Editorial clarification of procedures for selection of test samples and the testing of cleats designed for more than one cable; i) Relaxation of some mandrel material requirements; j) Clarification of the inspection requirements following a short-circuit test and adding the option of either a.c. or d.c. voltage testing following a second short-circuit; k) Clarification that the resistance to corrosion test applies to all types of fixing; l) New cleat example illustration; m) Limitations of use of the formulae in Annex B added.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61534-21:2014(Main)
Powertrack systems - Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting
SIST EN 61534-21:2014

IEC 61534-21:2014 specifies the particular requirements and tests for PT systems intended for mounting on walls and/or ceiling. They may be installed flush or semi-flush, surface mounted, suspended or spaced away from the surface using fixing devices. This second edition cancels and replaces the first edition published in 2006 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - Clauses 18 to 22 have been adapted to IEC 61534-1:2011 and include short-circuit test requirements; - Additional classification, terms and requirements for wall powertrack (PT) systems mounted at the skirting level (close to the floor) position. This publication is to be read in conjunction with IEC 61534-1:2011.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61534-22:2014(Main)
Powertrack systems - Part 22: Particular requirements for powertrack systems intended for onfloor or underfloor installation
SIST EN 61534-22:2014

IEC 61534-22:2014 specifies the particular requirements and tests for PT systems intended for mounting on, or under the floor level and floor service units which are mounted on the floor, under the floor or flush with the floor. This second edition cancels and replaces the first edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - Clauses 18 to 22 have been adapted to IEC 61534-1:2011 and include short-circuit test requirements; - addition of a new (500 N) classification for the resistance to traffic load applied to small surface areas on a flushfloor service unit; - addition of a new classification for the non-automatic closing of the lid on flushfloor service units and appropriate tests; - addition of tests for floor service units declared for use when a floor is wet treated. This publication is to be read in conjunction with IEC 61534-1:2011.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60352-9:2024(Main)
Solderless connections - Part 9: Ultrasonically welded connections - General requirements, test methods and practical guidance
SIST EN IEC 60352-9:2024

IEC 60352-9:2024 provides guidelines for welding and testing of ultrasonically welded connections and includes requirements, tests and practical guidance information. Ultrasonic welding is a form of cold friction welding that is becoming increasingly popular in many industries. This type of welding uses ultrasonic vibration to join materials together, creating a bond that is both strong and reliable. Ultrasonic welding has been identified as a process in ISO 4063-41 by the International Organization for Standardization (ISO). The process of ultrasonic welding relies on high frequency ultrasound waves being used to create frictional heat at the connection point. High temperature is not required for this special method of welding, making it one of the most cost-effective ways to join two materials together. It also requires fewer steps than traditional methods, meaning it can be completed quickly and with minimal resources. Ultrasonic welding has been around for decades but only recently has become more widely utilized due to advances in technology and its availability at lower cost. It can be used on many different materials including plastics, rubbers, metals, textiles, and composites. Due to its precision and strong bonds it creates, it has become extremely popular in manufacturing processes such as automotive industry, electronics industry, furniture production and even medical device production. This document covers ultrasonically welded connections made with stranded or flexible wires (class 2, 5 or 6 per IEC 60228) of copper or copper alloy, as well as of aluminium or aluminium alloy. These welded metal-to-metal connections shall employ wires with cross-sectional area of 0,08 mm2 to 160 mm2 and shall not exceed a total cross-sectional area, in case of wire bundle, of 200 mm2. For aluminium or aluminium alloy wires, the minimum required cross-sectional area is 2,5 mm2. Additionally, information on materials, data from industrial experience and test procedures are included to ensure electrically stable connections under prescribed environmental conditions. Lastly, this document aims to achieve comparable results when using ultrasonic welding equipment with similar performance and specifications as specified by the termination manufacturer.

  • Draft
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60352-6:2023(Main)
Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance
SIST EN IEC 60352-6:2023

IEC 60352-6:2022 This part of IEC 60352 is applicable to insulation piercing connections made with stranded wires and tinsel wires, insulated flat conductors and flat flexible circuitries for use in electrical and electronic equipment. Information on materials and data from industrial experience is included in addition to the test procedures to provide electrically stable connections under prescribed environmental conditions. The object of this document is to:  
determine the suitability of insulation piercing connections under specified mechanical, electrical, and atmospheric conditions;
provide a means of comparing test results when the tools used to make the connections, if any, are of different designs or manufacture.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day