EN 62275:2009

Cable management systems - Cable ties for electrical installations

This International Standard specifies requirements for metallic, non-metallic and composite cable ties and their associated fixing devices used for the management and support of wiring systems in electrical installations. Cable ties and associated fixing devices may also be suitable for other applications and where so used, regard should be taken of any additional requirements.

Kabelführungssysteme - Kabelbinder für elektrische Installationen

Systèmes de câblage - Colliers pour installations électriques

La présente Norme internationale spécifie les exigences pour les colliers métalliques, non métalliques et composites ainsi que pour leurs accessoires de fixation associés, utilisés pour l'aménagement et le soutien des systèmes de câblage dans les installations électriques. Les colliers et leurs accessoires de fixation associés peuvent également être utilisés pour d'autres applications et, dans ce cas, il conviendra de porter attention à toute exigence complémentaire.

Sistemi za urejanje pokabljenja - Kabelske vezice za električne napeljave (IEC 62275:2006, spremenjen)

General Information

• Status: Withdrawn
• Publication Date: 13-Aug-2009
• Withdrawal Date: 30-Jun-2012
• ICS: 29.120.10 - Conduits for electrical purposes
• ICS: 29.120.99 - Other electrical accessories
• Technical Committee: CLC/TC 213 - Cable management systems
• Drafting Committee: IEC/SC 23A - IEC_SC_23A
• Parallel Committee: IEC/SC 23A - IEC_SC_23A
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 19-Jan-2018
• Completion Date: 19-Jan-2018
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Directive: 2014/53/EU - Directive 2014/53/EU of The European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
• Ref Project: SIST EN 62275:2009 - Cable management systems - Cable ties for electrical installations (IEC 62275:2006, modified)

Relations

• Replaces: EN 50146:2000 - Cable ties for electrical installations
• Effective Date: 29-Jan-2023
• Replaced By: EN 62275:2015 - Cable management systems - Cable ties for electrical installations
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62275:2009
01-oktober-2009
1DGRPHãþD
SIST EN 50146:2000
6LVWHPL]DXUHMDQMHSRNDEOMHQMD.DEHOVNHYH]LFH]DHOHNWULþQHQDSHOMDYH,(&
VSUHPHQMHQ
Cable management systems - Cable ties for electrical installations (IEC 62275:2006,
modified)
Kabelführungssysteme - Kabelbinder für elektrische Installationen (IEC 62275:2006,
modifiziert)
Systèmes de câblage - Colliers pour installations électriques (CEI 62275:2006, modifiée)
Ta slovenski standard je istoveten z: EN 62275:2009
ICS:
29.120.99 'UXJDHOHNWULþQDGRGDWQD Other electrical accessories
RSUHPD
SIST EN 62275:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62275:2009

---------------------- Page: 2 ----------------------

SIST EN 62275:2009

EUROPEAN STANDARD
EN 62275

NORME EUROPÉENNE
August 2009
EUROPÄISCHE NORM

ICS 29.120.10; 29.120.99 Supersedes EN 50146:2000


English version


Cable management systems -
Cable ties for electrical installations
(IEC 62275:2006, modified)


Systèmes de câblage -  Kabelführungssysteme -
Colliers pour installations électriques Kabelbinder für elektrische Installationen
(CEI 62275:2006, modifiée) (IEC 62275:2006, modifiziert)




This European Standard was approved by CENELEC on 2009-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels


© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62275:2009 E

---------------------- Page: 3 ----------------------

SIST EN 62275:2009
EN 62275:2009 – 2 –
Foreword
The text of the International Standard IEC 62275:2006, prepared by SC 23A, Cable management
systems, of IEC TC 23, Electrical accessories, together with the common modifications prepared by
the Technical Committee CENELEC TC 213, Cable management systems, was submitted to the
formal vote and was approved by CENELEC as EN 62275 on 2009-07-01.
This European Standard supersedes EN 50146:2000.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-07-01
Annex ZA has been added by CENELEC.
__________

---------------------- Page: 4 ----------------------

SIST EN 62275:2009
– 3 – EN 62275:2009
Endorsement notice
The text of the International Standard IEC 62275:2006 was approved by CENELEC as a European
Standard with agreed common modifications as given below.
COMMON MODIFICATIONS
2 Normative references
Replace the reference to ISO 4892-2:1994 by:
ISO 4892-2:2006, Plastics – Methods of exposure to laboratory light sources – Part 2: Xenon-arc
sources
6 Classification
6.3.1 Replace Table 3 by:
Table 3 – Maximum operating temperature for application
Temperature
º C
50
60
75
85
105
120
150
11.1 Resistance to ultraviolet light
Replace the whole subclause by:
11.1 Resistance to ultraviolet light
11.1.1 For cable ties and fixing devices classified according to 6.5.1.2, a set of ten samples installed
on a mandrel according to 5.9 shall be subjected to ultraviolet light conditioning according to 11.1.2.
When the product is provided in more than one colour, the colour having the heaviest organic pigment
loading shall be subjected to this testing. All sets tested are considered representative of the material’s
entire colour range.
NOTE In determining the product types and sample set for testing, consideration should be given to products coloured red or
yell
...