Electric and optical fibre cables - Test methods for non-metallic materials - Part 510: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after thermal ageing in air

IEC 60811-510:2012 specifies the test method for a wrapping test after thermal ageing in air. This test method applies specifically to polyolefin insulation in communication cables. This test is intended for polyolefin insulations of unfilled cables and of dry cores for filled cables, where the insulation has a wall thickness of less than or equal to 0,8 mm. IEC 60811-510:2012 cancels and replaces Clause 10 of IEC 60811-4-2:2004, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. There are no specific technical changes with respect to the previous edition, but see the Foreword to IEC 60811-100:2012. This publication is to be read in conjunction with IEC 60811-100:2012.

Kabel, isolierte Leitungen und Glasfaserkabel - Prüfverfahren für nichtmetallene Werkstoffe - Teil 510: Mechanische Prüfungen - Verfahren speziell für Polyethylen- und Polypropylenmischungen - Wickelprüfung nach thermischer Alterung in Luft

Câbles électriques et câbles à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 510: Essais mécaniques - Méthodes spécifiques pour les mélanges polyéthylène et polypropylène - Essai d'enroulement après vieillissement thermique dans l'air

La CEI 60811-510:2012 spécifie la méthode à employer pour un essai d'enroulement après vieillissement thermique dans l'air. Cette méthode d'essai s'applique spécifiquement aux enveloppes isolantes à base de polyoléfine des câbles de communication. Cet essai est destiné aux enveloppes isolantes à base de polyoléfine des câbles non remplis et des assemblages de conducteurs destinés aux câbles remplis, là où l'enveloppe isolante a une épaisseur de paroi inférieure ou égale à 0,8 mm. La CEI 60811-510:2012 annule et remplace l'Article 10 de la CEI 60811-4-2:2004, qui est supprimée. L'ensemble des informations relatives aux remplacements figure dans l'Annexe A de la CEI 60811-100:2012. Aucune modification technique particulière n'a été effectuée par rapport à l'édition précédente; voir cependant l'avant-propos de la CEI 60811-100:2012. Cette publication doit être lue conjointement avec la CEI 60811-100:2012.

Električni in optični kabli - Preskuševalne metode za nekovinske materiale - 510. del: Mehanski preskusi - Metode, specifične za polietilenske in polipropilenske zmesi - Preskus z ovijanjem po termičnem staranju na zraku

510. del standarda IEC 60811 določa preskusno metodo za preskus z ovijanjem po termičnem staranju na zraku. Ta preskusna metoda je specifična za poliolefinsko izolacijo v komunikacijskih kablih. Ta preskus je predviden za poliolefinsko izolacijo nepolnjenih kablov in suha jedra polnjenih kablov, pri čemer je stena izolacije debela največ 0,8 mm.

General Information

Status
Published
Publication Date
14-Jun-2012
Technical Committee
Drafting Committee
Parallel Committee
Current Stage
6060 - Document made available - Publishing
Start Date
15-Jun-2012
Completion Date
15-Jun-2012

Relations

Buy Standard

Standard
EN 60811-510:2012
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60811-510:2012
01-september-2012
(OHNWULþQLLQRSWLþQLNDEOL3UHVNXãHYDOQHPHWRGH]DQHNRYLQVNHPDWHULDOH
GHO0HKDQVNLSUHVNXVL0HWRGHVSHFLILþQH]DSROLHWLOHQVNHLQSROLSURSLOHQVNH
]PHVL3UHVNXV]RYLMDQMHPSRWHUPLþQHPVWDUDQMXQD]UDNX
Electric and optical fibre cables - Test methods for non-metallic materials - Part 510:
Mechanical tests - Methods specific to polyethylene and polypropylene compounds -
Wrapping test after thermal ageing in air
Kabel, isolierte Leitungen und Glasfaserkabel - Prüfverfahren für nichtmetallene
Werkstoffe - Teil 510: Mechanische Prüfungen - Verfahren speziell für Polyethylen- und
Polypropylenmischungen - Wickelprüfung nach thermischer Alterung in Luft
Câbles électriques et câbles à fibres optiques - Méthodes d'essai pour les matériaux non
-métalliques - Partie 510: Essais mécaniques - Méthodes spécifiques pour les mélanges
de polyéthylène et de polypropylène - Essai d'enroulement après vieillissement
thermique dans l'air
Ta slovenski standard je istoveten z: EN 60811-510:2012
ICS:
29.035.20 3ODVWLþQLLQJXPHQLL]RODFLMVNL Plastics and rubber insulating
PDWHULDOL materials
29.060.20 Kabli Cables
SIST EN 60811-510:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60811-510:2012

---------------------- Page: 2 ----------------------

SIST EN 60811-510:2012

EUROPEAN STANDARD
EN 60811-510

NORME EUROPÉENNE
June 2012
EUROPÄISCHE NORM

ICS 29.035.01; 29.060.20 Supersedes EN 60811-4-2:2004 (partially)


English version


Electric and optical fibre cables -
Test methods for non-metallic materials -
Part 510: Mechanical tests -
Methods specific to polyethylene and polypropylene compounds -
Wrapping test after thermal ageing in air
(IEC 60811-510:2012)


Câbles électriques et câbles à fibres Kabel, isolierte Leitungen
optiques - und Glasfaserkabel -
Méthodes d'essai pour les matériaux Prüfverfahren für nichtmetallene
non-métalliques - Werkstoffe -
Partie 510: Essais mécaniques - Teil 510: Mechanische Prüfungen -
Méthodes spécifiques pour les mélanges Verfahren speziell für Polyethylen- und
polyéthylène et polypropylène - Polypropylenmischungen -
Essai d'enroulement après vieillissement Wickelprüfung nach thermischer Alterung
thermique dans l'air in Luft
(CEI 60811-510:2012) (IEC 60811-510:2012)


This European Standard was approved by CENELEC on 2012-04-17. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60811-510:2012 E

---------------------- Page: 3 ----------------------

SIST EN 60811-510:2012
EN 60811-510:2012 - 2 -
Foreword
The text of document 20/1306/FDIS, future edition 1 of IEC 60811-510, prepared by IEC/TC 20
"Electric cables" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 60811-510:2012.
The following dates are fixed:
(dop) 2013-01-17
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2015-04-17
• latest date by which the national
standards conflicting with the
document have to be withdrawn

This document supersedes Clause 10 of EN 60811-4-2:2004 (partially). Full details of the
replacements are shown in Annex A of EN 60811-100:2012.
There are no specific technical changes with respect to EN 60811-4-2:2004, but see the Foreword to
EN 60811-100:2012.

This standard is to be read in conjunction with EN 60811-100.

A
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.