EN 61029-2-11:2009

Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench saws

Applies to combined mitre-bench saws intended for cutting non-ferrous metals such as aluminium, wood or similar materials. The blade diameter does not exceed 350 mm.

Sicherheit transportabler motorbetriebener Elektrowerkzeuge - Teil 2-11: Besondere Anforderungen für kombinierte Tisch- und Gehrungssägen

Sécurité des machines-outils électriques semi-fixes - Partie 2-11: Règles particulières pour les scies d'établi-scies à mortaiser

Varnost premičnih električnih orodij - 2-11. del: Posebne zahteve za kombinirane krožne žage z delovno mizo in za zajeralne žage (IEC 61029-2-11:2001, spremenjen)

General Information

• Status: Withdrawn
• Publication Date: 20-Oct-2009
• Withdrawal Date: 31-May-2012
• ICS: 25.080.60 - Sawing machines
• ICS: 25.140.20 - Electric tools
• Technical Committee: CLC/TC 116 - Safety of hand-held motor-operated electric tools
• Drafting Committee: IEC/TC 116 - Safety of hand-held motor-operated electric tools
• Parallel Committee: IEC/SC 61F - IEC_SC_61F --> TC 116
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 03-Sep-2015
• Completion Date: 03-Sep-2015
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN 61029-2-11:2009 - Safety of transportable motor-operated electric tools -- Part 2-11: Particular requirements for combined mitre and bench saws

Relations

• Replaces: EN 61029-2-11:2003 - Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench saws
• Effective Date: 29-Jan-2023
• Replaced By: EN 61029-2-11:2012 - Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench saws
• Effective Date: 29-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VSUHPHQMHQSicherheit transportabler motorbetriebener Elektrowerkzeuge -- Teil 2-11: Besondere Anforderungen für kombinierte Tisch- und GehrungssägenSécurité des machines-outils électriques semi-fixes -- Partie 2-11: Règles particulières pour les scies d'établi-scies à mortaiserSafety of transportable motor-operated electric tools -- Part 2-11: Particular requirements for combined mitre and bench saws25.140.20Electric tools25.080.60Strojne žageSawing machinesICS:Ta slovenski standard je istoveten z:EN 61029-2-11:2009SIST EN 61029-2-11:2009en,fr01-december-2009SIST EN 61029-2-11:2009SLOVENSKI
STANDARDSIST EN 61029-2-11:20041DGRPHãþD

EUROPEAN STANDARD EN 61029-2-11 NORME EUROPÉENNE
EUROPÄISCHE NORM October 2009
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61029-2-11:2009 E
English version
Safety of transportable motor-operated electric tools -
Part 2-11: Particular requirements
for combined mitre and bench saws (IEC 61029-2-11:2001, modified)
Sécurité des machines-outils
électriques semi-fixes -
Partie 2-11: Règles particulières
pour les scies d'établi-scies à mortaiser(CEI 61029-2-11:2001, modifiée)
Sicherheit transportabler motorbetriebener Elektrowerkzeuge -
Teil 2-11: Besondere Anforderungen für kombinierte Tisch- und Gehrungssägen(IEC 61029-2-11:2001, modifiziert)
This European Standard was approved by CENELEC on 2009-06-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
ICS 25.080.60; 25.140.20 Supersedes EN 61029-2-11:2003SIST EN 61029-2-11:2009

at national level by publication of an identical
national standard or by endorsement
(dop) 2010-06-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow) 2012-06-01 This European Standard is divided into two parts: Part 1 General requirements, which are common to most transportable motor, operated tools (for the purpose of this European Standard referred to simply as tools) which could come within the scope of this European Standard. Part 2 Requirements for particular types of tool which either supplement or modify the requirements given in Part 1 to account for the particular hazards and characteristics of these specific tools. This European Standard has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and covers essential requirements of EC Directives 98/37/EC (amended by Directive 98/79/EC) and 2006/42/EC. See Annexes ZZA and ZZB. Compliance with the relevant clauses of Part 1 together with a relevant Part 2 of this European Standard provides one means of confirming with the specified essential requirements of the Directive. The requirements defined in EN 1050 are also dealt with in this European Standard. The standard follows the overall requirements of EN ISO 12100-1 and EN ISO 12100-2. For noise and vibration this European Standard covers the requirements for their measurement, the provisions of information arising from these measurements and the provision of information about the Personal Protective Equipment required. Specific requirements for the reduction of the risk arising from noise and vibration through the design of the tool are not given as this reflects the current state of art. Warning: Other requirements arising from other European Directives can be applicable to the products falling within the scope of this European Standard. CEN has prepared standards for industrial machines, which may extend to transportable machines. Although CEN and CENELEC have where appropriate used common solutions to provide uniform levels of protection, persons using this European Standard should check the scope of both this and CEN standards to ensure that a correct standard is used. SIST EN 61029-2-11:2009

- 3 - EN 61029-2-11:2009 This Part 2-11 is to be used in conjunction with EN 61029-1:2009. This Part 2-11 supplements or modifies the corresponding clauses of EN 61029-1, so as to convert it into the European Standard: “Particular requirements for combined mitre and bench saws”. Where a particular subclause of Part 1 is not mentioned in this Part 2-11, that subclause applies as far as reasonable. Where this Part 2-11 states "addition" "modification" or "replacement", the relevant text of Part 1 is to be adapted accordingly. Clauses, subclauses, notes, tables and figures which are additional to those in Part 1 are numbered starting from 101. Clauses, subclauses, notes, tables and figures which are additional to those in IEC 61029-2-11 are prefixed "Z". NOTE In this standard the following print types are used: - requirements proper: in roman type;
- test specifications: in italic type;
- explanatory matter: in smaller roman type. SIST EN 61029-2-11:2009

Normative references .41 Annex ZD (informative)
Dust measurement .40 Annex ZZA (informative)
Coverage of Essential Requirements of Directive 98/37/EC .41 Annex ZZB (informative)
Coverage of Essential Requirements of Directive 2006/42/EC .41 Figures Figure Z101 - Combined mitre and bench saw (Type “A”) .23 Figure Z102 - Combined mitre and bench saw (Type “B”) .24 Figure Z103 - Orientation of tool and operator .25 Figure Z104 - Saw blade areas - Combined mitre and bench saw in mitre saw position (Type “B”).26 Figure Z105 - Self-closing guard - Opening angle .27 Figure Z106 - Open guard construction .28 Figure Z107 - Guarding of saw blade relative to mitre saw table position (Type “A” machine) .28 SIST EN 61029-2-11:2009

- 5 - EN 61029-2-11:2009 Figure Z108 - Dimensions of test probe .29 Figure Z109 - Riving knife mounted guard .29 Figure Z110 - Top guard side walls .30 Figure Z111 - Saw blade guard - Stability test .32 Figure Z112 - Guarding below the bench table (Type “B” machine) .33 Figure Z113 - Width of the slot in the table .33 Figure Z114 - Dimensions of the bench saw table .34 Figure Z115 - Riving knife adjustment .35 Figure Z116 - Riving knife testing - Strength of riving knife mounting .36 Figure Z117 - Riving knife testing - Strength of riving knife .37 Figure Z118 - Two position rip fence .38 Figure Z119 - Flange characteristics .39 Figure Z120 - Example of push block and push stick .40 Tables Table Z101 - Noise test conditions for combined mitre and bench saws .10 Table ZD.101 - Conditions for dust measurement .42 SIST EN 61029-2-11:2009

1 Scope This clause of Part 1 is applicable except as follows: 1.1 Addition: This European Standard applies to transportable combined mitre and bench saws with a saw blade diameter not exceeding 315 mm and intended for cutting wood and analogous materials. 1.2 Addition: This Europea
...