EN 60695-6-1:2001
(Main)Fire hazard testing - Part 6-1: Smoke opacity - General guidance
Fire hazard testing - Part 6-1: Smoke opacity - General guidance
Gives guidance on: a) optical measurement of smoke obscuration; b) general aspects of optical smoke test methods; c) consideration of test methods; d) expression of smoke test data; e) relevance of optical smoke data to hazard assessment. Has the status of a basic safety publication in accordance with IEC Guide 104.
Prüfungen zur Beurteilung der Brandgefahr - Teil 6-1: Verdunkelung durch Rauch - Allgemeiner Leitfaden
Essais relatifs aux risques du feu - Partie 6-1: Opacité des fumées - Guide général
Fournit des directives sur: a) la mesure optique de l'obscurcissement par la fumée; b) les aspects généraux des méthodes d'essais optiques de la fumée; c) des considérations concernant les méthodes d'essais; d) l'expression des résultats d'essais; e) la pertinence des résultats des mesures optiques de la fumée pour l'évaluation des risques. A le statut d'une publication fondamentale de sécurité conformément au Guide 104 de la CEI.
Fire hazard testing - Part 6-1: Smoke opacity - General guidance
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 60695-6-1:2002
prva izdaja
STANDARD
september 2002
Fire hazard testing - Part 6-1: Smoke opacity - General guidance
ICS 13.220.40; 29.020 Referenčna številka
SIST EN 60695-6-1:2002(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 60695-6-1
NORME EUROPÉENNE
EUROPÄISCHE NORM October 2001
ICS 13.220.99; 29.020
English version
Fire hazard testing
Part 6-1: Smoke opacity - General guidance
(IEC 60695-6-1:2001)
Essais relatifs aux risques du feu Prüfungen zur Beurteilung der
Partie 6-1: Opacité des fumées - Brandgefahr
Guide général Teil 6-1: Verdunkelung durch Rauch -
(CEI 60695-6-1:2001) Allgemeiner Leitfaden
(IEC 60695-6-1:2001)
This European Standard was approved by CENELEC on 2001-10-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60695-6-1:2001 E
---------------------- Page: 2 ----------------------
EN 60695-6-1:2001 - 2 -
Foreword
The text of document 89/447/FDIS, future edition 1 of IEC 60695-6-1, prepared by IEC TC 89, Fire
hazard testing, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60695-6-1 on 2001-10-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at nation
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.