prEN IEC 62680-1-3:2024

Universal serial bus interfaces for data and power - Part 1-3: Common components - USB Type-C® cable and connector specification

IEC 62680-1-3:2024 This specification defines the USB Type-C® receptacles, plug and cables. The USB Type-C Cable and Connector Specification is guided by the following principles: - Enable new and exciting host and device form-factors where size, industrial design and style are important parameters - Work seamlessly with existing USB host and device silicon solutions - Enhance ease of use for connecting USB devices with a focus on minimizing user confusion for plug and cable orientation The USB Type-C Cable and Connector Specification defines a receptacle, plug, cable, and detection mechanisms that are compatible with existing USB interface electrical and functional specifications. This specification covers the following aspects that are needed to produce and use this new USB cable/connector solution in newer platforms and devices, and that interoperate with existing platforms and devices: - USB Type-C receptacles, including electro-mechanical definition and performance requirements - USB Type-C plugs and cable assemblies, including electro-mechanical definition and performance requirements - USB Type-C to legacy cable assemblies and adapters - USB Type-C-based device detection and interface configuration, including support for legacy connections - USB Power Delivery optimized for the USB Type-C connector The USB Type-C Cable and Connector Specification defines a standardized mechanism that supports Alternate Modes, such as repurposing the connector for docking-specific applications. IEC 62680-1-3:2024 cancels and replaces the fifth edition published in 2022 and constitutes a technical revision. This standard is the USB-IF publication Universal Serial Bus Type-C Cable and Connector Specification Revision 2.3. New release primarily for deprecating the Audio Adapter Accessory Mode and replacing it with the Liquid Corrosion Mitigation Mode, and for updating the Multi-port Charger Shared Capacity definition and behaviors. Also includes incorporation of all approved ECNs as of the revision date plus editorial clean-up.

Interfaces de bus universel en série pour les données et l'alimentation électrique - Partie 1-3: Composants communs - Spécification des câbles et des connecteurs USB Type-C®

IEC 62680-1-3: La présente spécification définit les fiches et embases, ainsi que les câbles USB Type-C®. La spécification des câbles et connecteurs USB Type-C est guidée par les principes suivants: - favoriser des critères de forme d'hôtes et dispositifs innovants et agréables, où la taille, la conception industrielle et le style constituent des paramètres importants; - interagir en toute fluidité avec les solutions d'hôtes et de dispositifs USB silicium actuelles; - améliorer la facilité d'utilisation pour la connexion des dispositifs USB, en réduisant autant que possible le risque de confusion lors de l'insertion des connecteurs et des câbles. La spécification des câbles et connecteurs USB Type-C définit des techniques de connexion et de détection des embases, fiches et câbles USB, qui sont compatibles avec les spécifications électriques et fonctionnelles d'interface USB existantes. La présente spécification couvre les aspects suivants, qui sont nécessaires à la production et à l'utilisation de cette nouvelle solution de câble/connecteur USB pour les plateformes et dispositifs récents, et qui interagissent avec les plateformes et dispositifs actuels: - les embases USB Type-C, notamment la description électromécanique et les exigences de performance; - les fiches et les ensembles câble-connecteurs USB Type-C, notamment la description électromécanique et les exigences de performance; - les ensembles câble-connecteurs et les adaptateurs USB Type-C pour la connexion avec les solutions existantes; - la configuration d'interface et la détection des dispositifs USB Type-C, notamment la prise en charge des solutions de connexion existantes; - le système USB Power Delivery optimisé pour les connecteurs USB Type-C. La spécification des câbles et connecteurs USB Type-C définit un mécanisme normalisé qui prend en charge les modes alternatifs, comme la reconversion du connecteur pour un usage spécifiquement lié au branchement. L’IEC 62680-1-3:2024 annule et remplace la cinquième édition parue en 2022 et constitue une révision technique. Cette norme est la publication de l'USB-IF relative au bus universel en série et à la spécification des câbles et connecteurs de Type-C, révision 2.3. Nouvelle version essentiellement destinée à déconseiller le Mode accessoire d'adaptateur audio et à le remplacer par le Mode inhibition de corrosion liquide, et à mettre à jour la définition et les comportements de la Capacité partagée des chargeurs multiports. Comprend également l'incorporation de l'ensemble des ECN approuvés à la date de revision.

Vmesniki univerzalnega serijskega vodila za prenos podatkov in napajanje - 1-3. del: Skupne komponente - Specifikacija za kable in priključke univerzalnega serijskega vodila tipa C®

General Information

• Status: Not Published
• Publication Date: 23-Jan-2025
• ICS: 33.120.20 - Wires and symmetrical cables
• ICS: 33.120.30 - RF connectors
• ICS: 35.200 - Interface and interconnection equipment
• Technical Committee: CLC/TC 100X - Audio, video and multimedia systems and equipment and related sub-systems
• Current Stage: 4060 - Enquiry results established and sent to TC, SR, BTTF - Enquiry
• Start Date: 02-Aug-2024
• Completion Date: 02-Aug-2024
• Ref Project: oSIST prEN IEC 62680-1-3:2024 - Universal serial bus interfaces for data and power - Part 1-3: Common components - USB type-c® cable and connector specification

Relations

• Revises: EN IEC 62680-1-3:2022 - Universal serial bus interfaces for data and power - Part 1-3: Common components - USB Type-C® cable and connector specification
• Effective Date: 20-Feb-2024

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2024
Vmesniki univerzalnega serijskega vodila za prenos podatkov in napajanje - 1-3.
del: Skupne komponente - Specifikacija za kable in priključke univerzalnega
serijskega vodila tipa C®
Universal serial bus interfaces for data and power - Part 1-3: Common components -
USB type-c® cable and connector specification
Interfaces de bus universel en série pour les données et l'alimentation électrique - Partie
1-3: Composants communs - Spécification des câbles et des connecteurs USB type-c®
Ta slovenski standard je istoveten z: prEN IEC 62680-1-3:2024
ICS:
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

100/4139/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62680-1-3 ED6
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-05-10 2024-08-02
SUPERSEDES DOCUMENTS:
100/4107/RR
IEC TA 18 : MULTIMEDIA HOME SYSTEMS AND APPLICATIONS FOR END-USER NETWORKS
SECRETARIAT: SECRETARY:
Japan Mr Keisuke Koide
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:

Other TC/SCs are requested to indicate their interest, if any, in
this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries” clauses to
be included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for submitting ISC clauses.
(SEE AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
Universal serial bus interfaces for data and power - Part 1-3: Common components - USB Type-C® cable and
connector specification
PROPOSED STABILITY DATE: 2030
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
®
Release 2.3 - 2 - USB Type-C Cable and
October 2023 Connector Speci�ication
NOTE FROM TC/SC OFFICERS: ®
Release 2.3 - 3 - USB Type-C Cable and
October 2023 Connector Speci�ication
3 Universal Serial Bus
4 Type-C Cable and Connector
5 Specifica�on
10 Release 2.3
11 October 2023 ®
Release 2.3 - 4 - USB Type-C Cable and
October 2023 Connector Speci�ication
13 Copyright © 2014-2023, USB3.0 Promoter Group:
14 Apple Inc., HP Inc., Intel Corpora�on, Microso� Corpora�on,
15 Renesas, STMicroelectronics, and Texas Instruments
16 All rights reserved. ®
18 NOTE: Adopters may only use the USB Type-C cable and connector to implement USB or third-party
19 functionality as expressly described in this Speci�ication; all other uses are prohibited.
20 LIMITED COPYRIGHT LICENSE: The USB 3.0 Promoters grant a conditional copyright license under the
21 copyrights embodied in the USB Type-C Cable and Connector Speci�ication to use and reproduce the
22 Speci�ication for the sole purpose of, and solely to the extent necessary for, evaluating whether to implement
23 the Speci�ication in products that would comply with the speci�ication. Without limiting the foregoing, use of
24 the Speci�ication for the purpose of �iling or modifying any patent application to target the Speci�ication or
25 USB compliant products is not authorized. Except for this express copyright license, no other rights or
26 licenses are granted, including without limitation any patent licenses. In order to obtain any additional
27 intellectual property licenses or licensing commitments associated with the Speci�ication a party must
28 execute the USB 3.0 Adopters Agreement. NOTE: By using the Speci�ication, you accept these license terms on
29 your own behalf and, in the case where you are doing this as an employee, on behalf of your employer.
32 INTELLECTUAL PROPERTY DISCLAIMER
33 THIS SPECIFICATION IS PROVIDED TO YOU “AS IS” WITH NO WARRANTIES WHATSOEVER, INCLUDING ANY
34 WARRANTY OF MERCHANTABILITY, NON-INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE.
35 THE AUTHORS OF THIS SPECIFICATION DISCLAIM ALL LIABILITY, INCLUDING LIABILITY FOR
36 INFRINGEMENT OF ANY PROPRIETARY RIGHTS, RELATING TO USE OR IMPLEMENTATION OF
37 INFORMATION IN THIS SPECIFICATION. THE PROVISION OF THIS SPECIFICATION TO YOU DOES NOT
38 PROVIDE YOU WITH ANY LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY
39 INTELLECTUAL PROPERTY RIGHTS.
40 All implementation examples and reference designs contained within this Speci�ication are included as part of
41 the limited patent license for those companies that execute the USB 3.0 Adopters Agreement.
® ® ®
44 USB Type-C , USB-C and USB4 are trademarks of the Universal Serial Bus Implementers Forum (USB-IF).
45 DisplayPort™ is a trademark of VESA. All product names are trademarks, registered trademarks, or service
46 marks of their respective owners.
47 Thunderbolt™ is a trademark of Intel Corporation. You may only use the Thunderbolt™ trademark or logo in
48 conjunction with products designed to this speci�ication that complete proper certi�ication and executing a
49 Thunderbolt™ trademark license – see https://www.usb.org/compliance for further information. ®
Release 2.3 - 5 - USB Type-C Cable and
October 2023 Connector Speci�ication
51 Contents
52 Speci�ication Work Group Chairs / Speci�ication Editors .2 0
53 Speci�ication Work Group Contributors .2 0
54 Pre-Release Draft Industry Reviewing Companies That Provided Feedback . 28
55 Revision History .2 8
56 1 Introduction .2 9
57 1.1 Purpose .2 9
58 1.2 Scope .2 9
59 1.3 Related Documents .2 9
60 1.4 Conventions .3 0
61 1.4.1 Precedence .3 0
62 1.4.2 Keywords .3 0
63 1.4.3 Numbering.3 1
64 1.5 Terms and Abbreviations .3 1
65 2 Overview .3 6
66 2.1 Introduction .3 6
67 2.2 USB Type-C Receptacles, Plugs and Cables .3 7
68 2.3 Con�iguration Process .3 8
69 2.3.1 Source-to-Sink Attach/Detach Detection .3 8
70 2.3.2 Plug Orientation/Cable Twist Detection .3 9
71 2.3.3 Initial Power (Source-to-Sink) Detection and Establishing the Data (Host-to-Device) Relationship
72 39
73 2.3.4 USB Type-C VBUS Current Detection and Usage .4 0
74 2.3.5 USB PD Communications.4 0
75 2.3.6 Functional Extensions .4 1
76 2.4 VBUS .4 1
77 2.5 VCONN .4 1
78 2.6 Hubs .4 2
79 3 Mechanical .4 3
80 3.1 Overview .4 3
81 3.1.1 Compliant Connectors .4 3
82 3.1.2 Compliant Cable Assemblies .4 3
83 3.1.3 Compliant USB Type-C to Legacy Cable Assemblies .4 4
84 3.1.4 Compliant USB Type-C to Legacy Adapter Assemblies .4 5
85 3.2 USB Type-C Connector Mating Interfaces .4 5
86 3.2.1 Interface De�inition.4 5
87 3.2.2 Reference Designs .6 6 ®
Release 2.3 - 6 - USB Type-C Cable and
October 2023 Connector Speci�ication
88 3.2.3 Pin Assignments and Descriptions .7 3
89 3.3 Cable Construction and Wire Assignments .7 4
90 3.3.1 Cable Construction (Informative) .7 4
91 3.3.2 Wire Assignments .7 6
92 3.3.3 Wire Gauges and Cable Diameters (Informative) .7 7
93 3.4 Standard USB Type-C Cable Assemblies .7 9
94 3.4.1 USB Full-Featured Type-C Cable Assembly .7 9
95 3.
...