EN IEC 62149-5:2020

Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs

IEC 62149-5:2020 is available as IEC 62149-5:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62149-5:2020 specifies performance on the transceiver modules for asynchronous-transfer-mode passive optical network (ATM-PON) systems recommended by the International Telecommunication Union (ITU) in ITU-T Recommendation G.983.1. This third edition cancels and replaces the second edition published in 2009 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - description of types in Clause 4 has been removed; - titles of reference documents have been updated.

Aktive Lichtwellenleiterbauelemente und -geräte - Betriebsverhalten - Teil 5: ATM-PON Sende- und Empfangsmodule mit Laserdiodentreiberschaltungen und Takt- und Datenrückgewinnungs-ICs

Composants et dispositifs actifs fibroniques - Normes de performances - Partie 5: Emetteurs-récepteurs ATM-PON avec programme de gestion LD et CI CDR

IEC 62149-5:2020 est disponible sous forme de IEC 62149-5:2020 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L'IEC 62149-5:2020 spécifie les performances applicables aux modules d’émetteurs-récepteurs pour les systèmes de réseau optique passif en mode de transfert asynchrone (ATM-PON), recommandées par l’Union internationale des télécommunications (UIT) dans la Recommandation UIT-T G.983.1. Cette troisième édition annule et remplace la seconde édition parue en 2009 et constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente: - les descriptions des types à l’Article 4 ont été supprimées; - les titres des documents de référence ont été actualisés.

Aktivne komponente in naprave optičnih vlaken - Izvedbeni standardi - 5. del: ATM-PON oddajniki in sprejemniki z lasersko diodnim pogonom in CDR IC (IEC 62149-5:2020)

General Information

• Status: Published
• Publication Date: 24-Sep-2020
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/SR 86C - Fibre optic systems and active devices
• Drafting Committee: IEC/SC 86C - IEC_SC_86C
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 25-Sep-2020
• Completion Date: 25-Sep-2020
• Ref Project: SIST EN IEC 62149-5:2020 - Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs (IEC 62149-5:2020)

Relations

• Replaces: EN 62149-5:2011 - Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs
• Effective Date: 25-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2020
Nadomešča:
SIST EN 62149-5:2011
Aktivne komponente in naprave optičnih vlaken - Izvedbeni standardi - 5. del:
ATM-PON oddajniki in sprejemniki z lasersko diodnim pogonom in CDR IC (IEC
62149-5:2020)
Fibre optic active components and devices - Performance standards - Part 5: ATM-PON
transceivers with LD driver and CDR ICs (IEC 62149-5:2020)
Aktive Lichtwellenleiterbauelemente und -geräte - Betriebsverhalten - Teil 5: ATM-PON
Sende- und Empfangsmodule mit Laserdiodentreiberschaltungen und Takt- und
Datenrückgewinnungs-ICs (IEC 62149-5:2020)
Composants et dispositifs actifs à fibres optiques - Normes de fonctionnement - Partie 5:
Emetteurs-récepteurs ATM-PON avec programme de gestion LD et ICs CDR (IEC
62149-5:2020)
Ta slovenski standard je istoveten z: EN IEC 62149-5:2020
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62149-5

NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2020
ICS 33.180.20 Supersedes EN 62149-5:2011 and all of its amendments
and corrigenda (if any)
English Version
Fibre optic active components and devices - Performance
standards - Part 5: ATM-PON transceivers with LD driver and
CDR ICs
(IEC 62149-5:2020)
Composants et dispositifs actifs fibroniques - Normes de Aktive Lichtwellenleiterbauelemente und -geräte -
performances - Partie 5: Emetteurs-récepteurs ATM-PON Betriebsverhalten - Teil 5: ATM-PON Sende- und
avec programme de gestion LD et CI CDR Empfangsmodule mit Laserdiodentreiberschaltungen und
(IEC 62149-5:2020) Takt- und Datenrückgewinnungs-ICs
(IEC 62149-5:2020)
This European Standard was approved by CENELEC on 2020-09-22. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62149-5:2020 E

European foreword
The text of document 86C/1667(F)/FDIS, future edition 3 of IEC 62149-5, prepared by SC 86C “Fibre
optic systems and active devices” of IEC/TC 86 “Fibre optics” was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 62149-5:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-06-22
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-09-22
document have to be withdrawn
This document supersedes EN 62149-5:2011 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62149-5:2020 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60793 series NOTE Harmonized as EN IEC 60793 series
IEC 60794 series NOTE Harmonized as EN 60794 series
IEC 60825 series NOTE Harmonized as EN 60825 series
IEC 61076 series NOTE Harmonized as EN IEC 61076 series
IEC 61280 series NOTE Harmonized as EN 61280 series
IEC 61281-1 NOTE Harmonized as EN IEC 61281-1
IEC 61754 series NOTE Harmonized as EN 61754 series
IEC 62007-1 NOTE Harmonized as EN 62007-1
IEC 62007-2 NOTE Harmonized as EN 62007-2
ISO 1101:2017 NOTE Harmonized as EN ISO 1101:2017 (not modified)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60068-2-6 - Environmental testing - Part 2–6: Tests - EN 60068-2-6 -
Test Fc: Vibration (sinusoidal)
IEC 60068-2-27 - Environmental testing - Part 2–27: Tests - EN 60068-2-27 -
Test Ea and guidance: Shock
IEC 60332-3-24 - Tests on electric and optical fibre cables EN IEC 60332-3-24 -
under fire conditions - Part 3–24: Test for
vertical flame spread of vertically-mounted
bunched wires or cables - Category C
IEC 60825-1 - Safety of laser products - Part 1: EN 60825-1 -
Equipment classification and requirements
IEC 60950-1 - Information technology equipment - Safety EN 60950-1 -
- Part 1: General requirements
IEC 61000-6-3 - Electromagnetic compatibility (EMC) - Part- -
6–3: Generic standards - Emission
standard for equipment in residential
environments
IEC 61280-1-1 - Fibre optic communication subsystem EN 61280-1-1 -
basic test procedures - Part 1–1: Test
procedures for general communication
subsystems - Transmitter output optical
power measurement for single-mode
optical fibre cable
IEC 61280-1-3 - Fibre optic communication subsystem test EN 61280-1-3 -
procedures - Part 1–3: General
communication subsystems - Central
wavelength and spectral width
measurement
IEC 61280-2-2 - Fibre optic communication subsystem test EN 61280-2-2 -
procedures - Part 2–2: Digital systems -
Optical eye pattern, waveform and
extinction ratio measurement
IEC 61300-2-4 - Fibre optic interconnecting devices and EN IEC 61300-2-4 -
passive components - Basic test and
measurement procedures - Part 2–4: Tests
- Fibre or cable retention
IEC 61300-2-17 - Fibre optic interconnecting devices and EN 61300-2-17 -
passive components - Basic test and
measurement procedures - Part 2–17:
Tests - Cold
IEC 61300-2-18 - Fibre optic interconnecting devices and EN 61300-2-18 -
passive components - Basic test and
measurement procedures - Part 2–18:
Tests - Dry heat - High temperature
endurance
IEC 61300-2-19 - Fibre optic interconnecting devices and EN 61300-2-19 -
passive components - Basic test and
measurement procedures - Part 2–19:
Tests - Damp heat (steady-state)
IEC 61300-2-22 - Fibre optic interconnecting devices and EN 61300-2-22 -
passive components - Basic test and
measurement procedures - Part 2–22:
Tests - Change of temperature
IEC 61300-3-6 - Fibre optic interconnecting devices and EN 61300-3-6 -
passive components - Basic test and
measurement procedures - Part 3–6:
Examinations and measurements - Return
loss
IEC 61753-1 - Fibre optic interconnecting devices and EN IEC 61753-1 -
passive components - Performance
standard - Part 1: General and guidance
IEC 62148-1 - Fibre optic active components and devices EN IEC 62148-1 -
- Package and interface standards - Part 1:
General and guidance
IEC 62150-2 - Fibre optic active components and devices EN 62150-2 -
- Test and measurement procedures - Part
2: ATM-PON transceivers
ITU-T 2006 Optical interfaces for equipments and - -
Recommendation systems relating to the synchronous digital
G.957 hierarchy
ITU-T 2005 Broadband optical access systems based - -
Recommendation on Passive Optical Networks (PON)
G.983.1
IEC 62149-5 ®
Edition 3.0 2020-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic active components and devices – Performance standards –

Part 5: ATM-PON transceivers with LD driver and CDR ICs

Composants et dispositifs actifs fibroniques – Normes de performances –

Partie 5: Émetteurs-récepteurs ATM-PON avec programme de gestion

LD et CI CDR
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.20 ISBN 978-2-8322-8608-1

– 2 – IEC 62149-5:2020 © IEC 2020
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Term, definitions and abbreviated terms . 8
3.1 Terms and definitions. 8
3.2 Abbreviated terms . 9
4 Classification . 9
5 Product definition . 9
5.1 Description of transceiver module . 9
5.2 Description of applied form . 10
5.3 Block diagram . 10
5.4 Absolute limiting rating . 10
5.5 Functional specification . 11
6 Testing . 18
6.1 General . 18
6.2 Characterization testing . 18
6.2.1 Characterization: transmitter section. 19
6.2.2 Characterization: receiver section . 20
6.3 Performance testing . 20
7 Environmental specifications . 21
7.1 General safety . 21
7.2 Laser safety . 21
7.3 Electromagnetic emission . 21
Annex A (informative) Measurement on tolerance to the reflected optical power
(Table 3, item 13) . 22
Annex B (informative) Logic level of alarm and shutdown signal . 24
Bibliography . 25

Figure 1 – Functional block diagram (example) . 10
Figure 2 – Relationship of phase between clock and data signals . 17
Figure 3 – Recommended electrical circuit diagram for LVTTL-type interface
(examples) . 17
Figure 4 – Schematic drawing for defining launched optical power without input to
transmitter . 18
Figure 5 – Experimental setup for measuring tolerance to the transmitter incident light
power . 18
...