prEN IEC 60335-2-26:2025/prAA:2025
(Amendment)Household and similar electrical appliances - Safety - Part 2-26: Particular requirements for clocks
Household and similar electrical appliances - Safety - Part 2-26: Particular requirements for clocks
This European standard deals with the safety of electric clocks having a rated voltage not more than 250 V including direct current (DC) supplied appliances and battery-operated appliances.
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-26: Besondere Anforderungen für Uhren
Appareils électrodomestiques et analogues - Sécurité - Partie 2-26: Exigences particulières pour les horloges
Gospodinjski in podobni električni aparati - Varnost - 2-26. del: Posebne zahteve za ure - Dopolnilo AA
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2025
Gospodinjski in podobni električni aparati - Varnost - 2-26. del: Posebne zahteve
za ure - Dopolnilo AA
Household and similar electrical appliances - Safety - Part 2-26: Particular requirements
for clocks
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-26:
Besondere Anforderungen für Uhren
Appareils électrodomestiques et analogues - Sécurité - Partie 2-26: Exigences
particulières pour les horloges
Ta slovenski standard je istoveten z: prEN IEC 60335-2-26:2025/prAA:2025
ICS:
13.120 Varnost na domu Domestic safety
39.040.20 Stenske ure Clocks
oSIST prEN IEC 60335-2- en
26:2025/oprAA:2025
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD DRAFT
prEN IEC 60335-2-26:2025
NORME EUROPÉENNE
EUROPÄISCHE NORM
prAA
March 2025
ICS 13.120; 97.040.50 -
English Version
Household and similar electrical appliances - Safety - Part 2-26:
Particular requirements for clocks
Appareils électrodomestiques et analogues - Sécurité - Sicherheit elektrischer Geräte für den Hausgebrauch und
Partie 2-26: Exigences particulières pour les horloges ähnliche Zwecke - Teil 2-26: Besondere Anforderungen für
Uhren
This draft amendment prAA, if approved, will modify the European Standard prEN IEC 60335-2-26:2025; it is submitted to CENELEC
members for enquiry.
Deadline for CENELEC: 2025-06-13.
It has been drawn up by CLC/TC 61.
If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 80762 Ref. No. prEN IEC 60335-2-26:2025/prAA:2025 E
Contents Page
1 European foreword . 3
2 1 Modification to the Introduction . 4
3 2 Modifications to Clause 1, “Scope" .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.