Household and similar electrical appliances - Safety - Part 1: General requirements

IEC 60335-1:2010 deals with the safety of electrical appliances for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Battery-operated appliances and other d.c. supplied appliances are within the scope of this standard. Appliances not intended for normal household use but which nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. Examples of such appliances are catering equipment, cleaning appliances for commercial use, and appliances for hairdressers. The principal changes in this edition as compared with the fourth edition are as follows: - updated the text of the standard to align with the most recent editions of the dated normative references; - modified the functional safety requirements using programmable electronic circuits including software validation requirements; - updated Clause 29 to cover insulation requirements subjected to high frequency voltages as in switch mode power supply circuits; - updated Subclause 30.2 to further align the pre-selection option with the end-product test option; - deleted some notes and converted many other notes to normative text; - clarified requirements for class III constructions. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of publication. The contents of the corrigenda of July 2010 and April 2011 have been included in this copy.

Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 1: Allgemeine Anforderungen

Appareils électrodomestiques et analogues - Sécurité - Partie 1: Exigences générales

La CEI 60335-1:2010 traite de la sécurité des appareils électriques pour usages domestiques et analogues dont la tension assignée n'est pas supérieure à 250 V pour les appareils monophasés et à 480 V pour les autres appareils. Les appareils alimentés par batteries et les autres appareils alimentés en courant continu sont compris dans le domaine d'application de la présente norme. Les appareils non destinés à un usage domestique normal mais qui néanmoins peuvent constituer une source de danger pour le public, tels que les appareils destinés à être utilisés par des usagers non avertis dans des magasins, chez des artisans et dans des fermes, sont compris dans le domaine d'application de la présente norme. Comme exemples de tels appareils, on peut citer le matériel de restauration, les appareils de nettoyage à usage commercial et les appareils pour les coiffeurs. Les principales modifications de la présente édition par rapport à la quatrième édition sont les suivantes: - mise à jour du texte pour aligner la norme avec les éditions les plus récentes des références normatives datées; - modification des exigences de sécurité fonctionnelle utilisant des circuits électroniques programmables, y compris les exigences de validation des logiciels; - mise à jour de l'Article 29 pour couvrir les exigences de l'isolation soumise à des tensions à fréquence élevée comme, par exemple, dans les circuits d'alimentation à découpage; - mise à jour du Paragraphe 30.2 pour mieux aligner les options de présélection avec les options d'essai du produit fini; - suppression de quelques notes et conversion de plusieurs autres notes en texte normatif; - clarification des exigences pour les parties de la classe III. L'attention des Comités Nationaux est attirée sur le fait que les fabricants d'appareils et les organismes d'essai peuvent avoir besoin d'une période transitoire après la publication d'une nouvelle publication CEI, ou d'une publication amendée ou révisée, pour fabriquer des produits conformes aux nouvelles exigences et pour adapter leurs équipements aux nouveaux essais ou aux essais révisés. Le comité recommande que le contenu de cette publication soit entériné au niveau national au plus tôt 12 mois et au plus tard 36 mois après la date de publication. Le contenu des corrigenda de juillet 2010 et avril 2011 a été pris en considération dans cet exemplaire.

Gospodinjski in podobni električni aparati - Varnost - 1. del: Splošne zahteve (IEC 60335-1:2010, spremenjen)

Ta mednarodni standard obravnava varnost električnih aparatov za gospodinjstvo in podobne namene z nazivno napetostjo, ki ne presega 250 V za enofazne naprave in 480 V za druge naprave.

General Information

Status
Published
Publication Date
12-Jan-2012
Current Stage
6060 - Document made available
Due Date
13-Jan-2012
Completion Date
13-Jan-2012

RELATIONS

Buy Standard

Standard
EN 60335-1:2012 - natisnjeno za čitalnico
English language
200 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 60335-1:2012
01-marec-2012
1DGRPHãþD
SIST EN 60335-1:2003
SIST EN 60335-1:2003/A1:2005
SIST EN 60335-1:2003/A11:2004
SIST EN 60335-1:2003/A12:2007
SIST EN 60335-1:2003/A13:2009
SIST EN 60335-1:2003/A14:2010
SIST EN 60335-1:2003/A15:2011
SIST EN 60335-1:2003/A2:2006

*RVSRGLQMVNLLQSRGREQLHOHNWULþQLDSDUDWL9DUQRVWGHO6SORãQH]DKWHYH ,(&

VSUHPHQMHQ

Household and similar electrical appliances - Safety - Part 1: General requirements

Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 1:

Allgemeine Anforderungen

Appareils électrodomestiques et analogues - Sécurité - Partie 1: Prescriptions générales

Ta slovenski standard je istoveten z: EN 60335-1:2012
ICS:
13.120 Varnost na domu Domestic safety
97.030 (OHNWULþQLDSDUDWL]DGRPQD Domestic electrical
VSORãQR appliances in general
SIST EN 60335-1:2012 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 60335-1:2012
---------------------- Page: 2 ----------------------
SIST EN 60335-1:2012
EUROPEAN STANDARD
EN 60335-1
NORME EUROPÉENNE
January 2012
EUROPÄISCHE NORM

ICS 13.120; 97.030 Supersedes EN 60335-1:2002 + corr. Jul.2009 + corr. May.2010 + A1:2004 + A2:2006 +

A11:2004 + A12:2006 + A13:2008 + A14:2010 + A15:2011 + corr. Jan.2007 + corr. Feb.2007

English version
Household and similar electrical appliances -
Safety -
Part 1: General requirements
(IEC 60335-1:2010, modified)

Appareils électrodomestiques et analogues - Sicherheit elektrischer Geräte für den

Sécurité - Hausgebrauch und ähnliche Zwecke -
Partie 1: Exigences générales Teil 1: Allgemeine Anforderungen
(CEI 60335-1:2010, modifiée) (IEC 60335-1:2010, modifiziert)

This European Standard was approved by CENELEC on 2011-11-21. CENELEC members are bound to

comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on

application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CENELEC member into its own language and

notified to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia,

Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,

Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania,

Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60335-1:2012 E
---------------------- Page: 3 ----------------------
SIST EN 60335-1:2012
EN 60335-1:2012 - 2 -
Foreword

This document (EN 60335-1:2012) consists of the text of IEC 60335-1:2010 prepared by IEC/TC 61 "Safety of

household and similar electrical appliances", together with the common modifications prepared by CLC/TC 61,

"Safety of household and similar electrical appliances".
The following dates are fixed:
(dop) 2012-11-21
• latest date by which this document has to be
implemented
at national level by publication of an identical
national standard or by endorsement
(dow) 2014-11-21
• latest date by which the national standards conflicting
with this document have to be withdrawn

This document supersedes EN 60335-1:2002 + corr. Jul.2009 + corr. May.2010 + A1:2004 + A2:2006 +

A11:2004 + A12:2006 + A13:2008 + A14:2010 + A15:2011 + corr. Jan.2007 + corr. Feb.2007.

Clauses, subclauses, notes, tables, figures and annexes which are additional to those in IEC 60335-1:2010

are prefixed “Z”.

This document has been prepared under a mandate given to CENELEC by the European Commission and

the European Free Trade Association, and supports essential requirements of EU Directive(s).

For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this document.

This part of EN 60335 is to be used in conjunction with the appropriate Part 2. The Parts 2 contain clauses to

supplement or modify the corresponding clauses in Part 1 to provide the relevant requirements for each type

of appliance.

NOTE 1 The following annexes contain provisions suitably modified from other IEC standards:

– Annex E Needle flame test EN 60695-11-5
– Annex F Capacitors EN 60384-14
– Annex G Safety isolating transformers EN 61558-1 and EN 61558-2-6
– Annex H Switches EN 61058-1
– Annex J Coated printed circuit boards EN 60664-3
– Annex N Proof tracking test EN 60112
NOTE 2 The following print types are used:
- requirements: in roman type;
- test specifications: in italic type;
- notes: in small roman type.

Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and associated

noun are also in bold.

Special national conditions causing a deviation from this European Standard are listed in Annex ZA.

National deviations from this European Standard are listed in Annex ZB.
---------------------- Page: 4 ----------------------
SIST EN 60335-1:2012
- 3 - EN 60335-1:2012

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.

Endorsement notice

The text of the International Standard IEC 60335-1:2010 was approved by CENELEC as a European

Standard with common modifications.
---------------------- Page: 5 ----------------------
SIST EN 60335-1:2012
EN 60335-1:2012 - 4 -
COMMON MODIFICATIONS
Introduction
Add after NOTE 1 the following sentence:

For appliances not covered by a particular Part 2 of EN 60335 additional consideration may need to be given

to particular categories of likely users, including vulnerable people and children and to related specific risks

(e.g. access to live parts, or to hot surfaces or to moving parts) that may be covered by a particular Part 2

considered to be closest to the product under examination.
Add:

The principal objectives of the Low Voltage Directive, 2006/95/EC, are covered by this standard. The essential

safety requirements of the following directives, which can be applicable to some household and similar

appliances, have also been taken into account:
- 2006/42/EC – Machinery directive;
- 89/106/EEC – Construction products directive;
- 97/23/EC – Pressure equipment directive.

The Essential Health and Safety Requirements (EHSR) of the Directive 2006/42/EC are covered by Annex

ZE. The application of EN 60335-1 alone does not give presumption of conformity for a product. This is

achieved by complying with the requirements of EN 60335-1 and the relevant Part 2, when this Part 2 is also

listed in the OJ under the Directive.
1 Scope
Replace the scope with the following:

This European Standard deals with the safety of electrical appliances for household environment and

commercial purposes, their rated voltage being not more than 250 V for single-phase and 480 V for others..

NOTE 1 Battery-operated appliances and other d.c. supplied appliances are within the scope of this standard.

NOTE Z1 Examples of appliance for household environment are appliances for typical housekeeping functions used in

the household environment that may also be used by non expert users for typical housekeeping functions:

• in shops, offices and other similar working environments;
• in farm houses;
• by clients in hotels, motels and other residential type environments;
• in bed and breakfast type environments.

NOTE Z2 Household environment includes the dwelling and its associated buildings, the garden, etc.

Appliances and machines intended to be used by expert or trained users in shops, in light industry and on

farms, and appliances and machines which are declared to be for commercial use by lay persons are within

the scope of this standard.
Additional requirements for such appliances are given in Annex ZE.
NOTE 2 Text deleted.
---------------------- Page: 6 ----------------------
SIST EN 60335-1:2012
- 5 - EN 60335-1:2012

NOTE Z3 Examples of such appliances and machines are catering equipment, cleaning machines for commercial use,

and appliances for hairdressers.

NOTE Z4 Criteria applied for the allocation of products covered by standards in the EN 60335 series under either the

Low Voltage Directive (LVD) or the Machinery Directive (MD) are given for information in Annex ZF.

This standard deals with the reasonably foreseeable hazards presented by appliances and machines that are

encountered by all persons.
However, in general, it does not take into account:
• children playing with the appliance;
• the use of the appliance by very young children;
• the use of the appliance by young children without supervision.

It is recognized that very vulnerable people may have needs beyond the level addressed in this standard.

NOTE 3 Attention is drawn to the fact that

– for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary;

– in many countries additional requirements are specified by the national health authorities, the national authorities

responsible for the protection of labour, the national water supply authorities and similar authorities.

NOTE 4 This standard does not apply to
– appliances intended exclusively for industrial purposes;

– appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or

explosive atmosphere (dust, vapour or gas);
– audio, video and similar electronic apparatus (IEC 60065);
– appliances for medical purposes (IEC 60601);
– hand-held motor-operated electric tools (IEC 60745);
– personal computers and similar equipment (IEC 60950-1);
– transportable motor-operated electric tools (IEC 61029).
2 Normative references
Add the following reference:

IEC/TR 60083:2009, Plugs and socket-outlets for domestic and similar general use standardized in member

countries of IEC
Add the following references:

EN 50366:2003, Household and similar electrical appliances - Electromagnetic fields - Methods for evaluation

and measurement

CLC/TR 50417, Safety of household and similar electrical appliances – Interpretations related to European

Standards within the scope of CENELEC/TC 61
---------------------- Page: 7 ----------------------
SIST EN 60335-1:2012
EN 60335-1:2012 - 6 -

EN 62233, Measurement methods for electromagnetic fields of household appliances and similar apparatus

with regard to human exposure (IEC 62233)
Add the following references:

EN 41003, Particular safety requirements for equipment to be connected to telecommunication networks

and/or a cable distribution system
Remove the following reference :

IEC 62151, Safety of equipment electrically connected to a telecommunication network

3 Terms and definitions
3.1 Add as a first paragraph:

When the term “appliance” is used, it is intended to cover appliances and/or machines for household use and

appliances and/or machines for commercial use.
3.6.3
accessible part
Modification:
Insert “and probe 18” after “test probe B”.
Add the following new definitions:
3.Z.1
children
young persons comprising very young children, young children and older children
3.Z.2
very young children
young persons aged from 0 up to and including 3 years
3.Z.3
young children
young persons older than 3 years and younger than 8 years
3.Z.4
older children
young persons aged from 8 years up to and including 14 years
3.Z.5
vulnerable people

persons having reduced physical, sensory or mental capabilities (e.g. partially disabled, elderly having some

reduction in their physical and mental capabilities), or lack of experience and knowledge (e.g. older children)

3.Z.6
very vulnerable people
persons having very extensive and complex disabilities
3.Z.7
use of the appliance

all actions required to have the appliance perform its intended function, such as plugging in, switching on,

using, regulating, cleaning the appliance or performing user maintenance

NOTE Z1 Children are not expected to perform cleaning or user maintenance of the appliance, very young children are

not expected to use appliances, young children are not expected to use appliances safely unless continuous supervision is

---------------------- Page: 8 ----------------------
SIST EN 60335-1:2012
- 7 - EN 60335-1:2012

given, older children and vulnerable people can use appliances safely after they have been given appropriate supervision

or instruction concerning use of the appliance.

NOTE Z2 Very vulnerable people are not expected to use appliances safely unless continuous supervision is given or

appliances are adapted accordingly with arrangements beyond the scope of this standard.

4 General requirement
Add at the end:

The interpretations included in CLC/TR 50417 shall be taken into consideration together with the relevant

requirements in the standards listed therein.
6 Classification
p 6.1 Delete “class 0” and “class 0I”.
7 Marking and instructions
7.1 Add:

The marking of rated voltage or rated voltage range, for appliances intended to be connected to the supply

mains, shall cover:
- 230 V for single-phase appliances;
- 400 V for multi-phase appliances.
7.10 Add the following before the compliance paragraph:

Devices used to start/stop operational functions of the appliance, if any, shall be distinguished from other

manual devices by means of shape, or size, or surface texture, or position, etc.
An indication that the device has been operated shall be given by:
• A tactile feedback or
• An audible and visual feedback.

NOTE Z1 The sound of the motor or sound of an actuator switching ON/OFF is regarded as audible feedback. The stopping of the

typical function (e.g. stopping of the vibration on the body of the appliance or of a part of it) is regarded as tactile means.

NOTE Z2 Devices used to start/stop operational functions mean devices that are operated by the user to start/stop the

intended function of the appliance.
A selector switch with an off-position clearly identifiable is allowed.

An ON/OFF switch, if any, is considered a suitable device to stop operational functions. A plug is not

considered a suitable device to stop operational functions, as it can be difficult to be reached by vulnerable

persons.
rd th th
7.12 Replace the 3 , 4 and 5 paragraph by the following:
The instructions shall include the substance of the following:

This appliance can be used by children aged from 8 years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall

---------------------- Page: 9 ----------------------
SIST EN 60335-1:2012
EN 60335-1:2012 - 8 -

not play with the appliance. Cleaning and user maintenance shall not be made by children without

supervision.
Add the following new subclause before 7.12.1:

7.12.Z1 The specific instructions related to the safe operation of this appliance (as given in 7.12 of this

standard) shall be collated together in the front section of the user instructions. The height of the characters,

measured on the capital letters, shall be at least 3 mm.

These instructions shall also be available in an alternative format, e.g. on a website

7.14 Add:

NOTE Z1 For the evaluation of legibility and clarity of safety warnings guidance can be found in IEC 62079.

8 Protection against access to live parts
8.1.1 Replace the 3 paragraph by the following:

Test probe B and probe 18 of EN 61032 are applied with a force not exceeding 1 N, the appliance being in

every possible position. Through openings, the test probe is applied to any depth that the probe will permit

and is rotated or angled before, during and after insertion to any position. If the opening does not allow the

entry of the probe, the force on the probe in the straight position is increased to 20 N when probe B is used or

10 N when probe 18 is used. If the probe then enters the opening, the test is repeated with the probe in the

angled position. However when using test probe 18 the appliance shall be fully assembled as in normal use

without any parts removed; parts that are intended to be removed for user maintenance shall not be removed.

8.2 Modification

In the third sentence, replace “test probe B of EN 61032” by “test probes of EN 61032”.

In the fourth sentence, replace “test probe B of EN 61032 is” by “test probe B and probe 18 of EN 61032 are”.

11 Heating
11.8 Delete the second sentence of the first paragraph.

Replace in Table 3 the row “External enclosure of motor-operated appliances, except handles held in

normal use” with the following:
External enclosure of motor-operated appliances except handles held in
za, zb
normal use :
– of bare metal 50
zc
– of coated metal 60
– of glass and ceramic 65
– of plastic having a thickness exceeding 0,3 mm 75
Add the following footnotes

Values for temperature rises of accessible parts in case of appliances that may be used by vulnerable people are given in

relevant Parts 2.

When the thickness of plastic coating does not exceed 0,3 mm, the temperature rise limits of coated metal or glass and ceramic

apply.
---------------------- Page: 10 ----------------------
SIST EN 60335-1:2012
- 9 - EN 60335-1:2012

Metal is considered coated when a coating having a minimum thickness of 80 µm made by enamel or non substantially plastic

coating is used.

The temperature rise limit applies also for plastic material having a metal finish of thickness less than 0,1 mm.

15 Moisture resistance
15.1.2 Add the following after the second paragraph:

Appliances with an automatic cord reel are tested with the cord in the most unfavourable position in such a

way that the reeling of the wet cord may affect electrical insulation during operation. The cord shall not be

dried before reeling.
20 Stability and mechanical hazards
20.2 Replace NOTE 1 by the following requirement:

For appliances having dangerous movable parts, due to their main function, e.g. the needle of a sewing

machine, tools of kitchen machines or the blade of an electrical knife, full protection is not possible for

performing their intended use.
NOTE 1 Void
Replace the 1 paragraph of compliance by:
Compliance is checked by inspection, by the tests of 21.1 and by means of

– a test probe that is similar to test probe B of EN 61032 but having a circular stop face with a

diameter of 50 mm, instead of the non circular face, applied with a force of 5N with the

accessories and detachable covers removed and

– test probe 18 of EN 61032, applied with a force of 2,5N on the appliance in a fully assembled

situation.
22 Construction
22.12 Add the following note after the first sentence in the first paragraph
NOTE Z1 Hazard includes ingestion or a choking hazard for vulnerable people.
24 Components
24.1 Replace by:

Components shall comply with the safety requirements specified in the relevant standards as far as they

reasonably apply.

NOTE Z1 Compliance with the standard for the relevant component does not necessarily ensure compliance with the

requirements of this standard.
NOTE Z2 Motors are not required to comply with IEC 60034-1.

Unless otherwise specified, the requirements of Clause 29 of this standard apply between live parts of

components and accessible parts of the appliance.

Unless otherwise specified, the requirements of 30.2 of this standard apply to parts of non-metallic material in

components including parts of non-metallic material supporting current-carrying connections inside

components.
---------------------- Page: 11 ----------------------
SIST EN 60335-1:2012
EN 60335-1:2012 - 10 -

Components that have not been previously tested or do not comply with the standard for the relevant

component are tested according to the requirements of 30.2 of this standard.

Components that have been previously tested and shown to comply with the resistance to fire requirements in

the standard for the relevant component need not be retested provided that:

– the severity specified in the component standard is not less than the severity specified in 30.2 of this

standard,
and

– unless the preselection alternative is used, the test report for the component states whether it complied

with the standard for the relevant component with or without flame. Flames existing for a cumulative time

not exceeding 2 s during the test are ignored.

If the above two conditions are not satisfied, the component is tested as part of the appliance.

There are two levels of severity specified for appliances for which 30.2.3 is applicable.

Unless components have been previously tested and found to comply with the relevant standard for the

number of cycles specified, they are tested in accordance with 24.1.1 to 24.1.9. For components mentioned in

24.1.1 to 24.1.9, no additional tests specified in the relevant standard for the component are necessary other

than those specified in 24.1.1 to 24.1.9.

Components that have not been separately tested and found to comply with the relevant standard and

components that are not marked or not used in accordance with their marking, are tested in accordance with

the conditions occurring in the appliance, the number of samples being that required by the relevant standard.

NOTE Z3 For automatic controls, marking includes documentation and declaration as specified in Clause 7 of

EN 60730-1:2000.

Lamp holders and starter holders that have not been previously tested and found to comply with the relevant

standard are tested as a part of the appliance and shall additionally comply with the gauging and

interchangeability requirements of the relevant standard under the conditions occurring in the appliance.

Where the relevant standard specifies these gauging and interchangeability requirements at elevated

temperatures, the temperatures measured during the tests of Clause 11 are used.

There are no additional tests specified for nationally standardized plugs such as those detailed in

IEC/TR 60083 or connectors complying with the standard sheets of IEC 60320-1 and IEC 60309, unless they

are specifically mentioned in the text of this standard.

Plugs and socket-outlets and other connecting devices of interconnection cords shall not be interchangeable

with plugs and socket-outlets listed in IEC/TR 60083 or IEC 60906-1 or with connectors and appliance inlets

complying with the standard sheets of IEC 60320-1, if direct supply to these parts from the supply mains could

give rise to a hazard.

When a standard does not exist for a component, there are no additional tests specified.

24.1.3 Add the following new note after the note:

NOTE Z1 For this test a thermostat or timer that is operating the relay or contactor is considered to be a switch.

24.1.7 Replace by:

24.1.7 If the remote operation of the appliance is via a telecommunication network, the relevant standard

for the telecommunication interface circuitry in the appliance is EN 41003.

Compliance with Clause 8 of this standard shall not be impaired by connecting the appliance to a device

covered by EN 41003.
---------------------- Page: 12 ----------------------
SIST EN 60335-1:2012
- 11 - EN 60335-1:2012
Add the following subclause:

24.Z1 For motor running capacitors (IEC 60252-1 type P2) with a metallic enclosure having an overpressure

fuse the flame testing of internal plastic parts supporting current carrying connections as required in 30.2.2

and 30.2.3.1 is not necessary.
25 Supply connection and external flexible cords
25.6 Add:

Supply cords of single-phase portable appliances having a rated current not exceeding 16 A shall be fitted

with a plug complying with the following standard sheets of IEC/TR 60083.
− for class I appliances standard sheet C2b, C3b or C4;
− for class II appliances standard sheet C5 or C6.
25.7 Add the content of NOTE 1 to the requirement as follows:

Their properties shall be at least those of ordinary tough rubber sheathed cords (code designation 60245 IEC

53). These cords are not suitable for appliances intended to be used outdoors or when they are liable to be

exposed to significant amounts of ultraviolet radiation.

Add the following text after the last dash and before the paragraph regarding "Supply cords for

class III appliances":
– Halogen-free thermoplastic compound sheathed.
Their properties shall be at least those of

• halogen-free thermoplastic compound sheathed cords (code designation H03Z1Z1H2-F,

H03Z1Z1-F), for appliances having a mass not exceeding 3 kg;

• halogen-free thermoplastic compound sheathed cords (code designation H05Z1Z1H2-F

or H05Z1Z1-F), for other appliances;
– Cross-linked halogen-free compound sheathed.

Their properties shall be at least those of cross-linked halogen-free compound sheathed cords (code

designation H07ZZ-F).
Add the following note:

NOTE Z1 The harmonized code designations corresponding to the IEC cord types are given in Annex ZD.

26 Terminals for external conductors
26.11 Add after the second sentence in the first paragraph:

Conductors connected by soldering are not considered to be positioned or fixed so that reliance is not placed

upon the soldering alone to maintain them in position unless they are held in place near the terminals

independently of the solder
29 Clearances, creepage distances and solid insulation
29.1 Modification:
Replace NOTE 5 by:
---------------------- Page: 13 ----------------------
SIST EN 60335-1:2012
EN 60335-1:2012 - 12 -

NOTE 5 Attention is drawn on the fact that for appliances intended for use at altitudes exceeding 2 000 m, the altitude

correction factors, relevant to the intended altitude, for clearances specified in Table A.2 of EN 60664-1:2007 may need to

be taken into account.
Add the following subclause:

29.3.Z1 Appliance shall be constructed so that if there is a possibility of damaging the insulation during

installation, the insulation shall withstand the scratch and penetration test of 21.2.

32 Radiation, toxicity and similar hazards
Add at the end:

Compliance regarding electromagnetic fields is checked according to EN 50366 or EN 62233..

Annex I (normative) Motors having basic insulation that is inadequate for the rated voltage of the

appliance
19.I.101 Replace the first sentence by:

The appliance is supplied at rated voltage and operated under normal operation with each of the following

fault conditions:
Add the following before the note:

When any of the fault conditions are simulated, the duration of the test is as specified in 19.7.

---------------------- Page: 14 ----------------------
SIST EN 60335-1:2012
- 13 - EN 60335-1:2012
Add the following annexes
Annex ZA
(normative)
Special national conditions

Special national condition: National characteristic or practice that cannot be changed even over a long

period, e.g. climatic conditions, electrical earthing conditions.
NOTE If it affects harmonization, it forms part of the European Standard.

For the countries in which the relevant special national conditions apply, these provisions are normative. For

other countries they are informative.
Clause Special national condition
19.5 Norway
The test is also applicable to appliances intended to be permanently
connected to fixed wiring.
Norway
22.2
The second paragraph of this subclause, that deals with single-phase,
permanently connected class I appliances having heating elements, is
not applicable due to the supply system.
Information concerning National plug and socket-outlets is available from the
25.6 and 25.25
CENELEC website, under the following hyperlink:
ftp://ftp.cencenelec.eu/CENELEC/TCs/61/PlugsSockets.pdf
Normative national requirements concerning plug and socket-outlets are shown
in the relevant National standard.
25.8
Ireland and United Kingdom
In the table, replace the line for 10 A and 16 A by:
> 10 and ≤ 13 1,25
> 13 and ≤ 16 1,5.
---------------------- Page: 15 ----------------------
SIST EN 60335-1:2012
EN 60335-1:2012 - 14 -
Annex ZB
(informative)
A-deviations

A-deviation: National deviation due to regulations, the alteration of which is for the time being outside the

competence of the CENELEC national member.

This European Standard/Harmonization Document falls under the EU Directives 2006/95/EC and 2006/42/EC.

NOTE (from CEN/CENELEC IR Part 2:2006, 2.17) Where standards fall under EC Directives, it is the view of the

Commission of the European Communities (OJ No C 59, 1982-03-09) that the effect of the decision of the Court of Justice

in case 815/79 Cremonini/Vrankovich (European Court Reports 1980, p. 3583) is that compliance with A-deviations is no

longer mandatory and that the free movement o
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.