Safety and control devices for gas burners and gas burning appliances - General requirements

This European Standard specifies safety, construction, and performance requirements and testing of safety control or regulating devices and sub-assemblies or fittings (hereafter referred to as controls) for burners and gas burning appliances using fuel gases of the first, second or third families and to their testing.
Controls to which this European Standard applies include the following:
-   automatic shut-off valves;
-   automatic burner control systems;
-   flame supervision devices;
-   gas/air ratio controls;
-   pressure regulators;
-   manual taps;
-   mechanical thermostats;
-   multifunctional controls;
-   pressure sensing devices;
-   valve proving systems;
-   zero pressure regulators.
The methods of test given in this standard are intended for product type testing.
For DC supplied controls Annex H applies.
NOTE 1   When no particular control standard exists, the control can be tested according to this standard and further tests taking into account the intended use.
NOTE 2   This European Standard should be used in conjunction with the specific control standard (see Bibliography).

Sicherheits-, Regel- und Steuereinrichtungen für Gasbrenner und Gasgeräte - Allgemeine Anforderungen

Diese Europäische Norm legt Sicherheits-, Konstruktions- und Funktionsanforderungen an Sicherheits-,
Regel- oder Steuereinrichtungen und Baugruppen oder Zubehör (im Folgenden als Regel- und Steuergeräte
[RS] bezeichnet) für Brenner und Gasgeräte, die für Brenngase der ersten, zweiten oder dritten Gasfamilie
ausgelegt sind, sowie deren Prüfung fest.
Diese Europäische Norm gilt für Regel- und Steuergeräte, einschließlich der folgenden Einrichtungen:
 automatische Absperrventile;
 Feuerungsautomaten;
 Flammenüberwachungseinrichtungen;
 Gas-Luft-Verbundregler;
 Druckregler;
 handbetätigte Einstellgeräte;
 mechanische Temperaturregler;
 Mehrfachstellgeräte;
 Druckwächter;
 Ventilüberwachungssysteme für automatische Absperrventile;
 Nulldruckregler.
Die Prüfungen, die in dieser Norm beschrieben werden, dienen der Typprüfung der Produkte.
Für mit Gleichspannung betriebene Regel- und Steuergeräte gilt Anhang H.
ANMERKUNG 1 Besteht keine spezifische Norm für Regel- und Steuergeräte, kann das RS entsprechend dieser Norm
und mit weiteren Prüfverfahren geprüft werden, wobei der vorgesehene Verwendungszweck zu berücksichtigen ist.
ANMERKUNG 2 Diese Europäische Norm sollte in Verbindung mit der jeweiligen spezifischen Norm für Regel- und
Steuergeräte (siehe Literaturhinweise) angewendet werden.

Équipements auxiliaires pour brûleurs à gaz et appareils à gaz - Exigences générales

La présente Norme européenne est relative à la sécurité, à la construction et au fonctionnement des dispositifs de sécurité, de contrôle, de réglage et les sous-ensembles ou accessoires (désignés ci-après par le terme «équipements») pour les brûleurs à gaz et les appareils à gaz utilisant des combustibles gazeux des première, deuxième et troisième familles et à leurs essais.
Les équipements auxquels la présente Norme européenne s'applique comprennent les suivants :
-   les robinets automatiques de sectionnement ;
-   les systèmes automatiques de commande de brûleur ;
-   les dispositifs de surveillance de flamme ;
-   les dispositifs de régulation du rapport air/gaz ;
-   les régulateurs de pression ;
-   les robinets manuels ;
-   les thermostats mécaniques ;
-   les robinets multifonctionnels ;
-   les dispositifs de surveillance de pression ;
-   les dispositifs de vérification d'étanchéité des robinets ;
-   les détendeurs à pression atmosphérique.
Les méthodes d'essai données dans la présente norme sont destinées à l'essai de type du produit. Pour les alimentations en courant continu, l’Annexe I s’applique.
NOTE 1   Quand il n’existe pas de norme particulière pour l’équipement, l’équipement peut être testé conformément à cette norme et à des essais complémentaires prenant en compte l’usage auquel il est destiné.
NOTE 2   Il convient d’utiliser cette Norme européenne en relation avec les normes d’équipement spécifiques (voir bibliographie).

Varnostne in nadzorne naprave za plinske gorilnike in plinske aparate - Splošne zahteve (vključno z dopolnili do A2)

Ta evropski standard določa zahteve za varnost, konstrukcijo in delovanje ter preskušanje varnostnih in nadzornih naprav in podsklopov ali priključkov (v nadaljevanju nadzornih naprav) za gorilnike in plinske aparate, ki uporabljajo kurilne pline prve, druge ali tretje družine, in njihovo preskušanje.
Nadzorne naprave, za katere velja ta evropski standard, vključujejo naslednje:
- avtomatske zaporne ventile;
- avtomatske krmilne sisteme gorilnikov;
- naprave za nadzor plamena;
- naprave za nadzor razmerja med plinom in zrakom;
- tlačne regulatorje;
- ročne pipe;
- mehanske termostate;
- večfunkcijske krmilne naprave;
- tlačna zaznavala;
- sisteme za preverjanje ventilov;
- regulatorje ničelnega tlaka.
Preskusne metode, navedene v tem standardu, so namenjene tipskemu preskušanju proizvodov.
Za nadzorne naprave, ki se napajajo z enosmernim tokom, velja dodatek H.
OPOMBA 1:   Če ne obstaja standard za konkretno nadzorno napravo, se lahko preskuša v skladu s tem standardom in drugimi preskusi, ki upoštevajo namen uporabe.
OPOMBA 2:   Ta evropski standard se mora uporabljati v povezavi s standardom za konkretno nadzorno napravo (glej bibliografijo).

General Information

Status
Withdrawn
Publication Date
11-Oct-2011
Withdrawal Date
02-Jun-2015
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
03-Jun-2015

Relations

Buy Standard

Standard
EN 13611:2008+A2:2012
English language
115 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sicherheits-, Regel- und Steuereinrichtungen für Gasbrenner und Gasgeräte - Allgemeine AnforderungenÉquipements auxiliaires pour brûleurs à gaz et appareils à gaz - Exigences généralesSafety and control devices for gas burners and gas burning appliances - General requirements27.060.20Plinski gorilnikiGas fuel burners23.060.40Pressure regulatorsICS:Ta slovenski standard je istoveten z:EN 13611:2007+A2:2011SIST EN 13611:2008+A2:2012en,fr,de01-januar-2012SIST EN 13611:2008+A2:2012SLOVENSKI
STANDARDSIST EN 13611:20081DGRPHãþD



SIST EN 13611:2008+A2:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13611:2007+A2
October 2011 ICS 23.060.40 Supersedes EN 13611:2007English Version
Safety and control devices for gas burners and gas burning appliances - General requirements
Équipements auxiliaires pour brûleurs à gaz et appareils à gaz - Exigences générales
Sicherheits-, Regel- und Steuereinrichtungen für Gasbrenner und Gasgeräte - Allgemeine Anforderungen This European Standard was approved by CEN on 7 October 2007 and includes Amendment 1 approved by CEN on 5 June 2011 and Amendment 2 approved by CEN on 29 July 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13611:2007+A2:2011: ESIST EN 13611:2008+A2:2012



EN 13611:2007+A2:2011 (E) 2 Contents Page Foreword . 31Scope . 52Normative references . 53Terms and definitions. 74Classification . 115Units of measurement and test conditions . 126Construction requirements . 137Performance . 238EMC/Electrical requirements . 349Marking, installation and operating instructions . 41Annex A (informative)
Gas connections in common use in the various countries . 42Annex B (informative)
Leak-tightness test – volumetric method . 43Annex C (informative)
Leak-tightness test – pressure loss method . 45Annex D (normative)
Conversion of pressure loss into leakage rate . 47Annex E (normative)
Electrical/electronic component fault modes . 48Annex F (normative)
Additional requirements for safety accessories and pressure accessories as defined in EU Directive 97/23/EC . 51Annex G (normative)
Materials for pr
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.