EN 60118-0:2015

Electroacoustics - Hearing aids - Part 0: Measurement of the performance characteristics of hearing aids

IEC 60118-0:2015 gives recommendations for the measurement of the performance characteristics of air conduction hearing aids based on a free field technique and measured with an acoustic coupler. This third edition cancels and replaces the second edition published in 1983 and its Amendment 1:1994 as well as IEC 60118-1:1995, Amendment 1:1998, IEC 60118-2:1983, Amendment 1:1993, Amendment 2:1997 and IEC 60118-6:1999. This edition constitutes a technical revision.

Akustik - Hörgeräte - Teil 0: Messung der Leistungsmerkmale von Hörgeräten

Electroacoustique - Appareils de correction auditive - Partie 0: Mesure des caractéristiques fonctionnelles des appareils de correction auditive

L'IEC 60118-0:2015 donne des recommandations pour la mesure des caractéristiques fonctionnelles des appareils de correction auditive à conduction aérienne, fondée sur une technique en champ acoustique libre utilisant un coupleur acoustique. Cette troisième édition annule et remplace la deuxième édition parue en 1983 et son Amendement 1:1994, l'IEC 60118-1:1995, l'Amendement 1:1998, l'IEC 60118-2:1983, l'Amendement 1:1993, l'Amendement 2:1997 et l'IEC 60118-6:1999. Cette édition constitue une révision technique.

Elektroakustika - Slušni aparati - Meritve tehničnih karakteristik slušnih aparatov

Ta del standarda IEC 60118 podaja priporočila za meritve tehničnih karakteristik slušnih aparatov, ki delujejo na podlagi prevajanja zvoka po zraku in ki temeljijo na tehniki prostega polja (free field technique) ter so izmerjene s pomočjo akustičnega spojnika.
Ta del standarda IEC 60118 velja za meritve in ocenjevanje elektroakustičnih karakteristik slušnih aparatov za potrebe, na primer, tipskega preskušanja in tehničnih listov proizvajalca.
Rezultati preskusov, pridobljeni z metodami, ki so navedene v tem delu standarda IEC 60118, prikazujejo delovanje v preskusnih pogojih in lahko znatno odstopajo od delovanja slušnega aparata v dejanskih pogojih uporabe.
Ta del standarda IEC 60118 uporablja akustični spojnik skladno s standardom IEC 60318-5, ki obremeni slušni aparat z določeno akustično impedanco in ne spreminja zvočnega tlaka v ušesu. Rezultati, pridobljeni z uporabo tega akustičnega spojnika, se bodo razlikovali od tistih, ki so pridobljeni z uporabo simulatorja zamašenega ušesa, zajetega v standardu IEC 60318-4, kot jo določajo starejše različice standarda IEC 60118-0.
Za meritev tehničnih karakteristik slušnih aparatov v simuliranih pogojih na kraju uporabe lahko uporabite standard IEC 60118-8. Za meritev karakteristik slušnih aparatov z običajnimi uporabniškimi nastavitvami in z uporabo govoru podobnega signala lahko uporabite standard IEC 60118-15.
Za meritev tehničnih karakteristik slušnih aparatov za namene zagotavljanja kakovosti pri izdelavi, dobavi in dostavi lahko uporabite standard IEC 60118-7. Frekvenčni razpon je v tem delu standarda IEC 60118 razširjen na 8 kHz v primerjavi s standardom IEC 60118-7, kjer je bil omejen na 5 kHz.
Čeprav je število meritev, ki jih zajema ta del standarda IEC 60118, omejeno, vse tu opisane meritve niso obvezne.
V primeru instrumentov za vstavitev v uho, ki so narejeni po meri, podatki, ki jih zagotovi proizvajalec, veljajo samo za določen slušni aparat, ki se ga preskuša.

General Information

• Status: Published
• Publication Date: 06-Aug-2015
• Withdrawal Date: 13-Jul-2018
• ICS: 17.140.50 - Electroacoustics
• Technical Committee: CLC/SR 29 - Electroacoustics
• Drafting Committee: IEC/TC 29 - IEC_TC_29
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 07-Aug-2015
• Completion Date: 07-Aug-2015
• Ref Project: SIST EN 60118-0:2015 - Electroacoustics - Hearing aids - Measurement of the performance characteristics of hearing aids

Relations

• Replaces: EN 60118-1:1995/A1:1998 - Hearing aids - Part 1: Hearing aids with induction pick-up coil input
• Effective Date: 29-Jan-2023
• Replaces: EN 60118-6:1999 - Hearing aids - Part 6: Characteristics of electrical input circuits for hearing aids
• Effective Date: 29-Jan-2023
• Replaces: EN 60118-2:1995 - Hearing aids - Part 2: Hearing aids with automatic gain control circuits
• Effective Date: 29-Jan-2023
• Replaces: EN 60118-0:1993 - Hearing aids - Part 0: Measurement of electroacoustical characteristics
• Effective Date: 28-Jan-2023
• Replaces: EN 60118-2:1995/A2:1997 - Hearing aids - Part 2: Hearing aids with automatic gain control circuits
• Effective Date: 28-Jan-2023
• Replaces: EN 60118-0:1993/A1:1994 - Hearing aids - Part 0: Measurement of electroacoustical characteristics
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60118-0:2015
01-december-2015
1DGRPHãþD
SIST EN 60118-0:2002
SIST EN 60118-0:2002/A1:2002
SIST EN 60118-1:2002 + A1:2002
SIST EN 60118-2:2004
SIST EN 60118-2:2004/A2:2006
SIST EN 60118-6:2002
(OHNWURDNXVWLND6OXãQLDSDUDWL0HULWYHWHKQLþQLKNDUDNWHULVWLNVOXãQLKDSDUDWRY
Electroacoustics - Hearing aids - Measurement of the performance characteristics of
hearing aids
/
Electroacoustique Appareils de correction auditive Mesure des caractéristiques de
performance des corrections auditives
Ta slovenski standard je istoveten z: EN 60118-0:2015
ICS:
11.180.15 3ULSRPRþNL]DJOXKHRVHEHLQ Aids for deaf and hearing
RVHEH]RNYDURVOXKD impaired people
17.140.50 Elektroakustika Electroacoustics
SIST EN 60118-0:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60118-0:2015

---------------------- Page: 2 ----------------------

SIST EN 60118-0:2015


EUROPEAN STANDARD EN 60118-0

NORME EUROPÉENNE

EUROPÄISCHE NORM
August 2015
ICS 17.140.50 Supersedes EN 60118-0:1993, EN 60118-1:1995, EN
60118-2:1995, EN 60118-6:1999
English Version
Electroacoustics - Hearing aids - Part 0: Measurement of the
performance characteristics of hearing aids
(IEC 60118-0:2015)
Electroacoustique - Appareils de correction auditive - Partie Akustik - Hörgeräte - Teil 0: Messung der
0: Mesure des caractéristiques fonctionnelles des appareils Leistungsmerkmale von Hörgeräten
de correction auditive (IEC 60118-0:2015)
(IEC 60118-0:2015)
This European Standard was approved by CENELEC on 2015-07-14. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60118-0:2015 E

---------------------- Page: 3 ----------------------

SIST EN 60118-0:2015
EN 60118-0:2015
European foreword
The text of document 29/867A/FDIS, future edition 3 of IEC 60118-0, prepared by IEC TC 29,
Electroacoustics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60118-0:2015.
The following dates are fixed:
(dop) 2016-04-14
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2018-07-14
standards conflicting with the
document have to be withdrawn

This document supersedes EN 60118-0:1993, EN 60118-1:1995, EN 60118-2:1995, EN 60118-6:1999.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.

Endorsement notice
The text of the International Standard IEC 60118-0:2015 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated :
IEC 60068 (series) NOTE Harmonized as EN 60068 (series).
IEC 60118-7:2005 NOTE Harmonized as EN 60118-7:2005.
IEC 60118-8:2005 NOTE Harmonized as EN 60118-8:2005.
IEC 60118-12 NOTE Harmonized as EN 60118-12.
IEC 60118-15 NOTE Harmonized as EN 60118-15.
IEC 60318-1 NOTE Harmonized as EN 60318-1.
IEC 60118-15 NOTE Harmonized as EN 60118-15.
IEC 60318-4:2010 NOTE Harmonized as EN 60318-4:2010.

2

---------------------- Page: 4 ----------------------

SIST EN 60118-0:2015
EN 60118-0:2015

Annex ZA
(normative)
Normative references to international publications
with their corresponding Eur
...