Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws

IEC 62841-2-11:2015 applies to applies to reciprocating saws such as jig saws and sabre saws.The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools is given in Annex K. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Hand-held electric tools, which can be mounted on a support or working stand for use as fixed tools without any alteration of the tool itself, are within the scope of this standard and such combination of a hand-held tool and a support is considered to be a transportable tool and thus covered by the relevant Part 3. This Part 2-11 is to be used in conjunction with the first edition of IEC 62841-1. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication. Key words: reciprocating saw, jig saw, sabre saw, hand-held tool, transportable tool

Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 2-11: Besondere Anforderungen für handgeführte hin- und hergehende Sägen

Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 2-11: Exigences particulières pour les scies alternatives portatives

L'IEC 62841-2-11:2015 s'applique aux scies alternatives telles que les scies sauteuses et les scies sabres. La tension assignée est inférieure à 250 V pour les outils à courant monophasé alternatif ou continu, et inférieure à 480 V pour les outils à courant alternatif triphasé. La puissance assignée est inférieure à 3 700 W. Les limites d'application de la présente Norme aux outils fonctionnant sur batterie sont indiquées dans l'Annexe K. La présente Norme traite des dangers présentés par les outils, encourus par tous les individus dans l'utilisation normale et dans l'utilisation impropre raisonnablement prévisible de ces outils. Les outils électroportatifs, qui peuvent être montés sur un support de travail pour être utilisés comme outils installés à poste fixe sans aucune modification de l'outil lui-même, sont compris dans le domaine portatif et d'un support est considérée comme un outil portable, donc couvert par la Partie 3 applicable. La présente Partie 2-11 doit être utilisée conjointement avec la première édition de l'IEC 62841-1. L'attention des Comités Nationaux est attirée sur le fait que les fabricants d'appareils et les organismes d'essai peuvent avoir besoin d'une période transitoire après la publication d'une nouvelle publication IEC, ou d'une publication amendée ou révisée, pour fabriquer des produits conformes aux nouvelles exigences et pour adapter leurs équipements aux nouveaux essais ou aux essais révisés. Le comité recommande que le contenu de cette publication soit entériné au niveau national au plus tôt 36 mois après la date de publication. Mots clés: scie alternative, scie sauteuse, scie sabre, outils protatifs, outil portable

Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 2-11. del: Posebne zahteve za ročne povratne žage (vbodne in sabljaste žage) (IEC 62841-2-11:2015)

Ta standard se uporablja za povratne žage, kot so vbodne in sabljaste žage.

General Information

Status
Published
Publication Date
14-Apr-2016
Withdrawal Date
22-Dec-2019
Current Stage
6060 - Document made available - Publishing
Start Date
15-Apr-2016
Completion Date
15-Apr-2016

Relations

Buy Standard

Standard
EN 62841-2-11:2016
English language
29 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62841-2-11:2016
01-julij-2016
1DGRPHãþD
SIST EN 60745-2-11:2010
(OHNWURPRWRUQDURþQDRURGMDSUHQRVQDRURGMDWHUVWURML]DWUDWRLQYUW9DUQRVW
GHO3RVHEQH]DKWHYH]DURþQHSRYUDWQHåDJH YERGQHLQVDEOMDVWHåDJH  ,(&

Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden
Machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws
(jig and sabre saws) (IEC 62841-2-11:2015)
Ta slovenski standard je istoveten z: EN 62841-2-11:2016
ICS:
25.080.60 Strojne žage Sawing machines
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 62841-2-11:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62841-2-11:2016

---------------------- Page: 2 ----------------------

SIST EN 62841-2-11:2016


EUROPEAN STANDARD EN 62841-2-11

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2016
ICS 25.140.20; 25.140.30 Supersedes EN 60745-2-11:2010
English Version
Electric motor-operated hand-held tools, transportable tools and
lawn and garden machinery - Safety - Part 2-11: Particular
requirements for hand-held reciprocating saws
(IEC 62841-2-11:2015, modified)
Outils électroportatifs à moteur, outils portables et machines Elektrische motorbetriebene handgeführte Werkzeuge,
pour jardins et pelouses - Sécurité - Partie 2-11: Exigences transportable Werkzeuge und Rasen- und
particulières pour les scies alternatives portatives Gartenmaschinen - Sicherheit - Teil 2-11: Besondere
(IEC 62841-2-11:2015, modifiée) Anforderungen für handgeführte hin- und hergehende
Sägen
(IEC 62841-2-11:2015, modifiziert)
This European Standard was approved by CENELEC on 2015-12-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62841-2-11:2016 E

---------------------- Page: 3 ----------------------

SIST EN 62841-2-11:2016
EN 62841-2-11:2016 (E)
European foreword
The text of document 116/246/FDIS, future edition 1 of IEC 62841-2-11, prepared by IEC/TC 116 "Safety
of motor-operated electric tools" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 62841-2-11:2016.
A draft amendment, which covers common modifications to IEC 62841-2-11, was prepared by
CLC/TC 116 "Safety of motor-operated electric tools" and approved by CENELEC.
The following dates are fixed:
– latest date by which this document has to be implemented (dop) 2016-12-23
at national level by publication of an identical
national standard or by endorsement
– latest date by which the national standards conflicting (dow) 2019-12-23
with this document have to be withdrawn
EN 62841-2-11:2016 supersedes EN 60745-2-11:2010.
This European Standard is divided into four parts:
Part 1: General requirements which are common to most hand-held electric motor operated tools
(for the purpose of this standard referred to simply as tools) which could come within the
scope of this standard;
Part 2, 3 or 4: Requirements for particular types of tools which either supplement or modify the
requirements given in Part 1 to account for the particular hazards and characteristics of
these specific tools.
This Part 2-11 is to be used in conjunction with EN 62841-1:2015.
This Part 2-11 supplements or modifies the corresponding clauses in EN 62841-1:2015, so as to convert
it into the European Standard: Particular requirements for hand-held reciprocating saws (jig and sabre
saws).
Where a particular subclau
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.