Multi-pair cables used in high bit rate digital access telecommunications networks - Part 3: Indoor multi-pair/quad riser cables up to 100 MHz for maximum length of connection 100 m supporting universal services, xDSL and applications up to 100 Mbit/s over IP

This European Standard defines indoor multi-pair/quad cables for installation in Multi Dwelling units shaft supporting universal services, xDSL and applications up to 100 MBits over IP, their relative definitions and requirements. NOTE Higher bit rate applications need cables specified in a relevant part of EN 50406 or EN 50288 series. It covers cables, with an overall screen, with performances up to 100 MHz, to be used in indoor networks intended to connect the broadband outside plant to the individual customer dwelling for applications 100 Mbit/s over IP maximum length of connection 100 m. The electrical, environmental, mechanical and transmission performance characteristics of the cables, related to their reference test methods, are detailed.

Vielpaarige Kabel für digitale Telekommunikationsnetzwerke mit hoher Bitrate - Teil 3: Vielpaarige-/Vierer-Steigekabel im Innenbereich bis 100 MHz über eine maximale Verbindungslänge von 100 m für universelle Dienste, xDSL und Anwendungen bis zu 100 Mbit/s über Internetprotokoll (IP)

Diese Europäische Norm beschreibt vielpaarige Kabel/Viererkabel zur Installation in Mehrfamilienhäusern für universelle Dienste, xDSL und Anwendungen bis zu 100 MBits über Internetprotokoll (IP) sowie die damit zusammenhängenden Definitionen und Anforderungen. ANMERKUNG Anwendungen mit höheren Bitraten erfordern Kabel, die in dem entsprechenden Teil der Reihen EN 50406 oder EN 50288 beschrieben sind. Diese Norm umfasst Kabel mit einem Gesamtschirm, mit Übertragungs¬eigenschaften bis zu 100 MHz als Innenkabel zum Anschluss der individuellen informationstechnischen Verkabelung mit dem Breitband Außenanschluss für Anwendungen bis zu 100 MBits über Internetprotokoll (IP). Die maximal empfohlene Länge beträgt 100 m. Die elektrischen und mechanischen Eigenschaften, die Übertragungseigenschaften und das Verhalten gegenüber den Bedingungen der Umgebung werden in Bezug auf die Prüfverfahren beschrieben.

Câbles multi-paires de l'utilisateur final utilisés dans les réseaux d'accès numériques de télécommunication à haut-débits - Partie 3 : Câbles intérieurs multi paires/quartes pour colonne de communication, performants jusqu’à 100 MHz, de longueur maximale de connexion de 100 m, supportant le service universel, le xDSL et les applications jusqu'à 100 MBits sur IP

Večparni kabli za dostopovna telekomunikacijska omrežja z velikimi bitnimi hitrostmi - 2. del: Večparni/četverčni kabli za napeljavo v jaških večstanovanjskih enot pri izvajanju univerzalne storitve, xDSL in aplikacij do prenosnih hitrosti 100 Mbit po IP

Standard EN 50407-3 določa večparne/četverčne kable za napeljavo v jaških večstanovanjskih enot pri izvajanju univerzalnih storitev, xDSL in aplikacij do prenosnih hitrosti 100 Mbit po IP, njihove definicije in zahteve. OPOMBA Aplikacije z višjimi bitnimi hitrostmi potrebujejo kable, ki jih določa ustrezen del iz skupine standardov EN 50406 ali EN 50288. Zajema kable s skupnim zaslonom in razponom delovanja do 100 MHz za uporabo v notranjih omrežjih, namenjenih povezavi zunanjega širokopasovnega dobavitelja z bivališčem posamezne stranke za aplikacije prenosnih hitrosti 100 Mbit po IP z dolžino povezave, ki meri največ 100 m. Podrobno so opredeljene električne, okoljske, mehanske in prenosne lastnosti delovanja kablov in navedene referenčne preskusne metode.

General Information

Status
Withdrawn
Publication Date
22-May-2014
Withdrawal Date
09-Mar-2017
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
30-Nov-2022

Buy Standard

Standard
EN 50407-3:2014 - BARVE
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 50407-2:2012 - BARVE
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Vielpaarige Kabel für digitale Telekommunikationsnetzwerke mit hoher Bitrate - Teil 2: Vielpaarige Kabel/Viererkabel zur Installation in Mehrfamilienhäusern für universelle Dienste, xDSL und Anwendungen bis zu 100 MBits über Internetprotokoll (IP)Multi-pair cables used in high bite rate digital access telecommunication networks - Part 2: Indoor multi-pair/quad cables for installation in Multi Dwelling Units shaft supporting universal services, xDSL and applications up to 100 MBits over IP33.120.20Wires and symmetrical cablesICS:Ta slovenski standard je istoveten z:EN 50407-3:2014SIST EN 50407-3:2014en01-september-2014SIST EN 50407-3:2014SLOVENSKI
STANDARD



SIST EN 50407-3:2014



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 50407-3
May 2014 ICS 33.120.20
English Version
Multi-pair cables used in high bit rate digital access telecommunications networks - Part 3: Indoor multi-pair/quad riser cables up to 100 MHz for maximum length of connection 100 m supporting universal services, xDSL and applications up to 100 Mbit/s over IP
Câbles multi-paires de l'utilisateur final utilisés dans les réseaux d'accès numériques de télécommunication à haut-débits - Partie 3 : Câbles intérieurs multi paires/quartes pour colonne de communication, performants jusqu'à 100 MHz, de longueur maximale de connexion de 100 m, supportant le service universel, le xDSL et les applications jusqu'à 100 MBits sur IP
Vielpaarige Kabel für digitale Telekommunikationsnetzwerke mit hoher Bitrate - Teil 3: Vielpaarige-/Vierer-Steigekabel im Innenbereich bis 100 MHz über eine maximale Verbindungslänge von 100 m für universelle Dienste, xDSL und Anwendungen bis zu 100 Mbit/s über Internetprotokoll (IP) This European Standard was approved by CENELEC on 2014-03-10. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 50407-3:2014 E SIST EN 50407-3:2014



EN 50407-3:2014 – 2 –
Contents Foreword . 4 1 Scope . 5 2 Normative references . 5 3 Terms, definitions and abbreviations . 5 3.1 Terms and definitions . 5 3.2 Abbreviations . 5 4 General information . 6 4.1 General cable description . 6 4.2 Environment and product safety requirement . 6 4.3 Testing . 6 5 Requirements for conductor . 6 5.1 Construction and dimensions . 6 5.2 Mechanical requirements .
...

SLOVENSKI STANDARD
oSIST prEN 50407-2:2012
01-junij-2012
9HþSDUQLNDEOL]DGRVWRSRYQDWHOHNRPXQLNDFLMVNDRPUHåMD]YHOLNLPLELWQLPL
KLWURVWPLGHO9HþSDUQLþHWYHUþQLNDEOL]DQDSHOMDYRYMDãNLKYHþVWDQRYDQMVNLK
HQRWSULL]YDMDQMXXQLYHU]DOQHVWRULWYH['6/LQDSOLNDFLMGRSUHQRVQLKKLWURVWL
0ELWSR,3
Multi-pair cables used in high bite rate digital access telecommunication networks - Part
2: Indoor multi-pair/quad cables for installation in Multi Dwelling Units shaft supporting
universal services, xDSL and applications up to 100 MBits over IP
Vielpaarige Kabel für digitale Telekommunikationsnetzwerke mit hoher Bitrate - Teil 2:
Vielpaarige Kabel/Viererkabel zur Installation in Mehrfamilienhäusern für universelle
Dienste, xDSL und Anwendungen bis zu 100 MBits über Internetprotokoll (IP)
Ta slovenski standard je istoveten z: prEN 50407-2:2012
ICS:
33.120.20 äLFHLQVLPHWULþQLNDEOL Wires and symmetrical
cables
oSIST prEN 50407-2:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 50407-2:2012

---------------------- Page: 2 ----------------------
oSIST prEN 50407-2:2012
 DRAFT
EUROPEAN STANDARD
prEN 50407-2

NORME EUROPÉENNE
April 2012
EUROPÄISCHE NORM

ICS 33.120.20


English version


Multi-pair cables used in high bite rate digital access telecommunication networks -
Part 2: Indoor multi-pair/quad cables for installation in Multi Dwelling Units shaft
supporting universal services, xDSL and applications up to 100 MBits over IP



To be completed Vielpaarige Kabel für digitale
Telekommunikationsnetzwerke mit hoher Bitrate -
Teil 2: Vielpaarige Kabel/Viererkabel zur
Installation in Mehrfamilienhäusern für universelle
Dienste, xDSL und Anwendungen bis zu 100 MBits
über Internetprotokoll (IP)



This draft European Standard is submitted to CENELEC members for CENELEC enquiry.
Deadline for CENELEC: 2012-09-21.

It has been drawn up by CLC/SC 46XC.

If this draft becomes a European Standard, CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national
standard without any alteration.

This draft European Standard was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own
language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to
change without notice and shall not be referred to as a European Standard.


CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Project: 22897 Ref. No. prEN 50407-2:2012 E

---------------------- Page: 3 ----------------------
oSIST prEN 50407-2:2012
prEN 50407-2:2012 – 2 –
1 Contents
2 Foreword . 4
3 1 Sc op e . . 5
4 2 Normative references . 5
5 3 Terms, definitions and abbreviations . 5
6 3.1 Definitions . 5
7 3.2 Abbreviations . 6
8 4 General information . 6
9 4.1 General cable description . 6
10 4.2
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.