Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-11: Tests - Axial compression

IEC 61300-2-11:2012 ensures that the captivation or the attachment of the cable to the fibre optic devices such as fibre optic closures will withstand compressive axial loads likely to be applied during normal service. This second edition cancels and replaces the first edition published in 1995. It constitutes a technical revision. The changes with respect to the previous edition are as follows: - the procedure and details to be specified have been reconsidered; - the severity of the test has been modified according to the cable diameter; - the apparatus and mount for the device under test have been reconsidered in the sense of clamping device placement and this datum has been indicated in an appropriate figure. Key words: compressive axial loads

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-11: Prüfungen - Axialer Druck

Dispositifs d'interconnexion et composants passifs à fibres optiques - Procédures fondamentales d'essais et de mesures - Partie 2-11: Essais - Compression axiale

La CEI 61300-2-11:2012 vérifie que la rétention ou la fixation du câble à des dispositifs liés à l'optique des fibres tels que des boîtiers à fibres résistera aux forces de compression axiale susceptibles d'être appliquées dans des conditions normales de fonctionnement. Cette deuxième édition annule et remplace la première édition publiée en 1995. Elle constitue une révision technique. Les modifications par rapport à l'édition antérieure sont les suivantes: - la procédure et les détails à spécifier ont été réexaminés; - la sévérité de l'essai a été modifiée selon le diamètre du câble; - l'appareillage et le montage du dispositif en essai ont été réexaminés dans le sens du placement du dispositif de maintien et cette donnée a été indiquée dans une figure appropriée. Mots clés: forces de compression axiale

Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni postopki - 2-11. del: Preskusi - Osni pritisk (IEC 61300-2-11:2012)

Namen tega dela standarda IEC 61300 je zagotoviti, da bo trdnost pritrditve kabla na napravo z optičnimi vlakni zdržala tlačno osno obremenitev, ki se lahko pojavi med običajnim delovanjem.

General Information

Status
Published
Publication Date
07-Feb-2013
Withdrawal Date
11-Dec-2013
Current Stage
6060 - Document made available - Publishing
Start Date
08-Feb-2013
Completion Date
08-Feb-2013

Relations

Buy Standard

Standard
EN 61300-2-11:2013
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-april-2013
1DGRPHãþD
SIST EN 61300-2-11:1999
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH2VQRYQLSUHVNXVQLLQPHULOQL
SRVWRSNLGHO3UHVNXVL2VQLSULWLVN ,(&
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-11: Tests - Axial compression (IEC 61300-2-11:2012)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 2-11: Prüfungen - Axialer Druck (IEC 61300-2-11:2012)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Procédures
fondamentales d'essais et de mesures - Partie 2-11: Essais - Compression axiale (CEI
61300-2-11:2012)
Ta slovenski standard je istoveten z: EN 61300-2-11:2013
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61300-2-11
NORME EUROPÉENNE
February 2013
EUROPÄISCHE NORM
ICS 33.180.20 Supersedes EN 61300-2-11:1997

English version
Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures -
Part 2-11: Tests -
Axial compression
(IEC 61300-2-11:2012)
Dispositifs d'interconnexion et composants Lichtwellenleiter -
passifs à fibres optiques - Verbindungselemente und passive
Procédures fondamentales d'essais et de Bauteile -
mesures - Grundlegende Prüf- und Messverfahren -
Partie 2-11: Essais - Teil 2-11: Prüfungen -
Compression axiale Axialer Druck
(CEI 61300-2-11:2012) (IEC 61300-2-11:2012)

This European Standard was approved by CENELEC on 2012-12-12. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61300-2-11:2013 E
Foreword
The text of document 86B/3487/FDIS, future edition 2 of IEC 61300-2-11, prepared by SC 86B, "Fibre
optic interconnecting devices and passive components", of IEC TC 86, "Fibre optics", was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN 61300-2-11:2013.

The following dates are fixed:
(dop) 2013-09-12
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2013-12-12

standards conflicting with the
document have to be withdrawn
This document supersedes EN 61300-2-11:1997.
11:1997:
a) the procedure and details to be specified have been reconsidered;
b) the severity of the test has been modified according to the cable diameter;
c) the apparatus and mount for the device under test have been reconsidered in the sense of clamping
device placement and this datum has been indicated in an appropriate figure.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 61300-2-11:2012 was approved by CENELEC as a European
Standard without any modification.

- 3 - EN 61300-2-11:2013
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 61300-1 - Fibre optic interconnecting devices and EN 61300-1 -
passive components - Basic test and
measurement procedures -
Part 1: General and guidance
IEC 61300-3-1 - Fibre optic interconnecting devices and EN 61300-3-1 -
passive components - Basic test and
measurement procedures -
Part 3-1: Examinations and measurements -
Visual examination
IEC 61300-2-11 ®
Edition 2.0 2012-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components – Basic test and

measurement procedures –
Part 2-11: Tests – Axial compression

Dispositifs d'interconnexion et composants passifs à fibres optiques –

Procédures fondamentales d’essais et de mesures –

Partie 2-11: Essais – Compression axiale

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX G
ICS 33.180.20 ISBN 978-2-83220-439-9

– 2 – 61300-2-11  IEC:2012
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 General description . 5
4 Apparatus . 5
4.1 General . 5
4.2 Clamping device . 5
4.3 Fixed clamping device . 5
4.4 Force generator . 6
4.5 Force gauge . 6
5 Procedure. 6
5.1 Prepare specimens . 6
5.2 Pre-conditioning . 6
5.3 Mount the device under test . 6
5.4 Apply load . 6
5.5 Post-test examination . 7
6 Severity . 7
7 Details to be specified . 7

Figure 1 – Example of test apparatus . 6

Table 1 – Recommended severity levels . 7
Table 2 – Recommended severity levels for closures . 7

61300-2-11  IEC:2012 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
BASIC TEST AND MEASUREMENT PROCEDURES –

Part 2-11: Tests – Axial compression

FOREWORD
1) The International Electrotec
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.