EN IEC 60317-27-4:2020/A1:2024

Specifications for particular types of winding wires - Part 27-4: Paper tape covered rectangular aluminium wire

Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 27-4: Flachdrähte aus Aluminium, papierisoliert

Spécifications pour types particuliers de fils de bobinage - Partie 27-4: Fil de section rectangulaire en aluminium recouvert de ruban papier

Specifikacije za posebne vrste navijalnih žic - 27-4. del: S papirnim trakom ovita pravokotna aluminijasta žica - Dopolnilo A1

General Information

• Status: Published
• Publication Date: 01-Aug-2024
• ICS: 29.060.10 - Wires
• Technical Committee: CLC/TC 55 - Winding wires
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 02-Aug-2024
• Due Date: 29-Dec-2023
• Completion Date: 02-Aug-2024
• Ref Project: SIST EN IEC 60317-27-4:2020/A1:2024 - Specifications for particular types of winding wires - Part 27-4: Paper tape covered rectangular aluminium wire

Relations

• Amends: EN IEC 60317-27-4:2020 - Specifications for particular types of winding wires - Part 27-4: Paper tape covered rectangular aluminium wire
• Effective Date: 14-Feb-2023

Overview

The EN IEC 60317-27-4:2020/A1:2024 standard, published by the European Committee for Electrotechnical Standardization (CLC), specifies the requirements for paper tape covered rectangular aluminium winding wires. This amendment (A1, 2024) updates and refines the original 2020 edition of the Part 27-4 specification under the IEC 60317 series, which deals with particular types of winding wires. It is intended to ensure consistent quality, performance, and testing protocols for the use of rectangular aluminium wires insulated with paper tape in electrical applications.

Key Topics

• Scope of Standard: Defines manufacturing and testing standards for paper tape covered rectangular aluminium wires used in electrical winding applications.
• Material Specification: Addresses aluminium as the base conductor material with paper tape insulation for improved electrical and thermal properties.
• Testing Procedures:
  • Electrical resistance testing following IEC 60317-0-9:2015 and its 2024 amendment.
  • Mechanical properties evaluation, excluding springiness testing (deemed inappropriate).
• Compliance and Conformity: Aligns with IEC and CENELEC regulations, requiring national standard adoption by April 18, 2025.
• Patent and Licensing Notice: Highlights potential patent rights related to the implementation and the user’s responsibility to verify compliance.

Applications

• Electrical Machines: Utilized in winding wires for transformers, inductors, and motors requiring reliable conductivity and insulation.
• Electronics Manufacturing: Suitable for components where rectangular aluminium wire provides a specific cross-sectional profile for compact winding.
• Power Transformers: Ideal for lightweight, efficient conductor windings insulated with durable paper tape.
• Industrial Equipment: Used in coils and winding systems where insulation integrity and performance are critical.
• Renewable Energy Systems: As aluminium-based winding wire, it supports sustainable material use without compromising on electric characteristics.

Related Standards

• IEC 60317-0-9:2015 and Amendment 1:2024 – General requirements and testing methods for enamelled rectangular aluminium wires, serving as a foundational reference.
• EN IEC 60317-27-4:2020 – The base standard prior to this amendment, defining specifications for paper tape covered rectangular aluminium wires.
• IEC/TC 55 "Winding Wires" Technical Committee publications – Standards for various types of winding wires, ensuring interoperability and harmonized quality.
• Relevant CENELEC regulations – Ensuring all European members uniformly adopt and apply the updated standard.

---

This standard is essential for manufacturers, engineers, and quality assurance professionals focused on aluminium winding wire applications, facilitating compliance with the latest international requirements. The integration of amendment A1 enhances clarity on testing methods and regulatory alignment while underscoring the importance of adherence to updated electrical and mechanical property assessments. Keeping up to date with EN IEC 60317-27-4:2020/A1:2024 enables optimized performance, safety, and durability of electrotechnical winding components.

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2024
Specifikacije za posebne vrste navijalnih žic - 27-4. del: S papirnim trakom ovita
pravokotna aluminijasta žica - Dopolnilo A1
Specifications for particular types of winding wires - Part 27-4: Paper tape covered
rectangular aluminium wire
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 27-4:
Flachdrähte aus Aluminium, papierisoliert
Spécifications pour types particuliers de fils de bobinage - Partie 27-4: Fil de section
rectangulaire en aluminium recouvert de ruban papier
Ta slovenski standard je istoveten z: EN IEC 60317-27-4:2020/A1:2024
ICS:
29.060.10 Žice Wires
77.150.10 Aluminijski izdelki Aluminium products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 60317-27-4:2020/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM August 2024
ICS 29.060.10
English Version
Specifications for particular types of winding wires - Part 27-4:
Paper tape covered rectangular aluminium wire
(IEC 60317-27-4:2020/AMD1:2024)
Spécifications pour types particuliers de fils de bobinage - Technische Lieferbedingungen für bestimmte Typen von
Partie 27-4: Fil de section rectangulaire en aluminium Wickeldrähten - Teil 27-4: Flachdrähte aus Aluminium,
recouvert de ruban papier papierisoliert
(IEC 60317-27-4:2020/AMD1:2024) (IEC 60317-27-4:2020/AMD1:2024)
This amendment A1 modifies the European Standard EN IEC 60317-27-4:2020; it was approved by CENELEC on 2024-07-18. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60317-27-4:2020/A1:2024 E

European foreword
The text of document 55/1987/CDV, future IEC 60317-27-4/AMD1, prepared by IEC/TC 55 "Winding
wires" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-04-18
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-07-18
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60317-27-4:2020/AMD1:2024 was approved by CENELEC
as a European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Replace the reference to EN 60317-0-9:2015 with:
Publication Year Title EN/HD Year
IEC 60317-0-9 2015 Specifications for particular types of EN 60317-0-9 2015
winding wires - Part 0-9: General
requirements - Enamelled rectangular
aluminium wire
+ AMD1 2024 +A1 2024
IEC 60317-27-4 ®
Edition 1.0 2024-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Specifications for particular types of winding wires –

Part 27-4: Paper tape covered rectangular aluminium wire

Spécifications pour types particuliers de fils de bobinage –

Partie 27-4: Fil de section rectangulaire en aluminium recouvert de ruban papier

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.060.10  ISBN 978-2-8322-9012-5

Warning! Make sure that you obtai
...