EN 50144-2-5:1999

Safety of hand-held electric motor operated tools - Part 2-5: Particular requirements for circular saws and circular knives

This clause of Part 1 is applicable except as follows: 1.1. Addition: This standard applies to all types of circular saws for cutting wood and similar materials and to circular knives. These requirements do not cover circular saws and circular knives when mounted in a support for use as fixed tools. This standard does not give requirements for the design of the tool for the reduction of the risk arising from noise and vibration.

Sicherheit handgeführter motorbetriebener Elektrowerkzeuge - Teil 2-5: Besondere Anforderungen für Kreissägen und Kreismesser

Sécurité des outils électroportatifs à moteur - Partie 2-5: Règles particulières pour les scies circulaires et les couteaux circulaires

Varnost električnih ročnih orodij - 2-5. del: Posebne zahteve za krožne žage in krožne nože

General Information

• Status: Withdrawn
• Publication Date: 28-Nov-1999
• Withdrawal Date: 30-Nov-2001
• ICS: 25.080.60 - Sawing machines
• ICS: 25.140.20 - Electric tools
• Technical Committee: CLC/TC 116 - Safety of hand-held motor-operated electric tools
• Drafting Committee: IEC/TC 116 - Safety of hand-held motor-operated electric tools
• Parallel Committee: IEC/SC 61F - IEC_SC_61F --> TC 116
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Apr-2006
• Completion Date: 01-Apr-2006
• Directive: 98/37/EC - Machinery
• Mandate: M/083 - Machinery
• Ref Project: SIST EN 50144-2-5:2000 - Safety of hand-held electric motor operated tools -- Part 2-5: Particular requirements for circular saws and circular knives

Relations

• Replaces: EN 50144-2-5:1996 - Safety of hand-held electric motor operated tools - Part 2-5: Particular requirements for circular saws and circular knives
• Effective Date: 29-Jan-2023
• Replaced By: EN 60745-2-5:2003 - Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50144-2-5:2000
01-september-2000
1DGRPHãþD
SIST EN 50144-2-5:1999
9DUQRVWHOHNWULþQLKURþQLKRURGLMGHO3RVHEQH]DKWHYH]DNURåQHåDJHLQ
NURåQHQRåH
Safety of hand-held electric motor operated tools -- Part 2-5: Particular requirements for
circular saws and circular knives
Sicherheit handgeführter motorbetriebener Elektrowerkzeuge -- Teil 2-5: Besondere
Anforderungen für Kreissägen und Kreismesser
Sécurité des outils électroportatifs à moteur -- Partie 2-5: Règles particulières pour les
scies circulaires et les couteaux circulaires
Ta slovenski standard je istoveten z: EN 50144-2-5:1999
ICS:
25.080.60 Strojne žage Sawing machines
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 50144-2-5:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50144-2-5:2000

---------------------- Page: 2 ----------------------

SIST EN 50144-2-5:2000

---------------------- Page: 3 ----------------------

SIST EN 50144-2-5:2000

---------------------- Page: 4 ----------------------

SIST EN 50144-2-5:2000

---------------------- Page: 5 ----------------------

SIS
...