EN 61347-2-5:2001

Lamp controlgear - Part 2-5: Particular requirements for d.c. supplied electronic ballasts for public transport lighting

This part of EN 61347 specifies particular safety requirements for d.c. supplied electronic ballasts intended for operation from power sources likely to have attendant transients and surges, for example, for road and railway vehicles, tramcars, and craft used for public transport. This first edition of EN 61347-2-5, together with EN 61347-1, cancels and replaces section four of the first edition of EN 60924, published in 1990, and constitutes a minor revision. This standard shall be used in conjunction with EN 61347-1. It was established on the basis of the first edition (2000) of that standard.

Geräte für Lampen - Teil 2-5: Besondere Anforderungen an gleichstromversorgte elektronische Vorschaltgeräte für die Beleuchtung öffentlicher Verkehrsmittel

Appareillages de lampes - Partie 2-5: Prescriptions particulières pour les ballasts électroniques alimentés en courant continu pour l'éclairage des transports en commun

La présente partie de la EN 61347 spécifie les prescriptions particulières de sécurité pour les ballasts électroniques alimentés en courant continu prévus pour fonctionner sur des sources de tension exposées à des phénomènes transitoires et à des surtensions, et destinés à être utilisés dans les transports en commun, par exemple à bord des véhicules routiers et de chemin de fer, des tramways et autres embarcations utilisées pour les transports en commun. Cette première édition de la EN 61347-2-5, conjointement avec la EN 61347-1, annule et remplace la section quatre de la première édition de la EN 60924, parue en 1990, dont elle constitue une révision mineure. Cette norme doit être utilisée conjointement avec la EN 61347-1. Elle a été établie sur la base de la première édition (2000) de cette norme.

Lamp controlgear – Part 2-5: Particular requirements for d.c. supplied electronic ballasts for public transport lighting (IEC 61347-2-5:2000)

General Information

• Status: Withdrawn
• Publication Date: 31-Jan-2001
• Withdrawal Date: 30-Nov-2006
• ICS: 29.140.99 - Other standards related to lamps
• Technical Committee: CLC/TC 34 - 'Lamps and related equipment
• Drafting Committee: IEC/SC 34C - IEC_SC_34C
• Parallel Committee: IEC/SC 34C - IEC_SC_34C
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 23-Jun-2014
• Completion Date: 23-Jun-2014
• Ref Project: SIST EN 61347-2-5:2002 - Lamp controlgear -- Part 2-5: Particular requirements for d.c. supplied electronic ballasts for public transport lighting

Relations

• Replaces: EN 60924:1991/A1:1994 - D.C. supplied electronic ballasts for tubular fluorescent lamps - General and safety requirements
• Effective Date: 29-Jan-2023
• Replaced By: EN 61347-2-3:2011 - Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61347-2-5:2002
01-december-2002
1DGRPHãþD
SIST EN 60924:1995

Lamp controlgear – Part 2-5: Particular requirements for d.c. supplied electronic

ballasts for public transport lighting (IEC 61347-2-5:2000)

Lamp controlgear -- Part 2-5: Particular requirements for d.c. supplied electronic ballasts

for public transport lighting
Geräte für Lampen -- Teil 2-5: Besondere Anforderungen an gleichstromversorgte
elektronische Vorschaltgeräte für die Beleuchtung öffentlicher Verkehrsmittel

Appareillages de lampes -- Partie 2-5: Prescriptions particulières pour les ballasts

électroniques alimentés en courant continu pour l'éclairage des transports en commun

Ta slovenski standard je istoveten z: EN 61347-2-5:2001
ICS:
29.130.01 Stikalne in krmilne naprave Switchgear and controlgear
na splošno in general
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
SIST EN 61347-2-5:2002 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 61347-2-5:2002
---------------------- Page: 2 ----------------------
SIST EN 61347-2-5:2002
---------------------- Page: 3 ----------------------
SIST EN 61347-2-5:2002
---------------------- Page: 4 ----------------------
SIST EN 61347-2-5:2002
---------------------- Page: 5 ----------------------
SIST EN 61347-2-5:2002
---------------------- Page: 6 ----------------------
SIST EN 61347-2-5:2002
NORME CEI
INTERNATIONALE
IEC
61347-2-5
INTERNATIONAL
Première édition
STANDARD
First edition
2000-10
Appareillages de lampes –
Partie 2-5:
Prescriptions particulières pour les ballasts
électroniques alimentés en courant continu
pour l'éclairage des transports en commun
Lamp controlgear –
Part 2-5:
Particular requirements for d.c.
supplied electronic ballasts for
public transport lighting
© IEC 2000 Droits de reproduction réservés ⎯ Copyright - all rights reserved

Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in

utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,

électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission in

microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: [phone] e-mail: [e-mail] IEC web site http://www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
PRICE CODE N
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue
---------------------- Page: 7 ----------------------
SIST EN 61347-2-5:2002
61347-2-5 © IEC:2000 – 3 –
CONTENTS
Page

FOREWORD .......................................................................................................................... 5

INTRODUCTION ....................................................................................................................9

Clause

1 Scope ............................................................................................................................ 11

2 Normative references..................................................................................................... 11

3 Definitions...................................................................................................................... 11

4 General requirements .................................................................................................... 11

5 General notes on tests................................................................................................... 11

6 Classification .................................................................................................................11

7 Marking.......................................................................................................................... 13

7.1 Mandatory marking ............................................................................................... 13

7.2 Information to be provided, if applicable................................................................ 13

8 Protection against accidental contact with live parts....................................................... 13

9 Terminals....................................................................................................................... 13

10 Provisions for earthing ................................................................................................... 13

11 Moisture resistance and insulation ................................................................................. 13

12 Electric strength.............................................................................................................13

13 Thermal endurance test for windings.............................................................................. 13

14 Pulse voltages ............................................................................................................... 15

15 Abnormal conditions ...................................................................................................... 17

16 Fault conditions ............................................................................................................. 19

17 Construction ..................................................................................................................19

18 Creepage distances and clearances............................................................................... 19

19 Screws, current-carrying parts and connections ............................................................. 19

20 Resistance to heat, fire and tracking .............................................................................. 19

21 Resistance to corrosion.................................................................................................. 19

Annexes ............................................................................................................................... 25

Figure 1 – Suitable circuit for producing and applying long-duration pulses .......................... 21

Figure 2 – Circuit for testing rectifying effect ........................................................................ 23

Table 1 – Long-duration pulse voltages ................................................................................ 15

Table 2 – Short-duration pulse voltage (10 µs or less).......................................................... 15

---------------------- Page: 8 ----------------------
SIST EN 61347-2-5:2002
61347-2-5 © IEC:2000 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
–––––––––
LAMP CONTROLGEAR –
Part 2-5: Particular requirements for d.c. supplied electronic ballasts
for public transport lighting
FOREWORD

1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote

international co-operation on all questions concerning standardization in the electrical and electronic fields. To

this end and in addition to other activities, the IEC publishes International Standards. Their preparation is

entrusted to technical committees; any IEC National Committee interested in the subject dealt with may

participate in this preparatory work. International, governmental and non-governmental organizations liaising

with the IEC also participate in this preparation. The IEC collaborates closely with the International

Organization for Standardization (ISO) in accordance with conditions determined by agreement between the

two organizations.

2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an

international consensus of opinion on the relevant subjects since each technical committee has representation

from all interested National Committees.

3) The documents produced have the form of recommendations for international use and are published in the form

of standards, technical specifications, technical reports or guides and they are accepted by the National

Committees in that sense.

4) In order to promote international unification, IEC National Committees undertake to apply IEC International

Standards transparently to the maximum extent possible in their national and regional standards. Any

divergence between the IEC Standard and the corresponding national or regional standard shall be clearly

indicated in the latter.

5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any

equipment declared to be in conformity with one of its standards.

6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject

of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.

International Standard IEC 61347-2-5 has been prepared by subcommittee 34C: Auxiliaries

for lamps, of IEC technical committee 34: Lamps and related equipment.

This first edition of IEC 61347-2-5, together with IEC 61347-1, cancels and replaces section

four of the first edition of IEC 60924, published in 1990, and constitutes a minor revision.

This standard shall be used in conjunction with IEC 61347-1. It was established on the basis

of the first edition (2000) of that standard.

This part 2 supplements or modifies the corresponding clauses in IEC 61347-1 so as to

convert that publication into the IEC standard: Particular requirements for d.c. supplied

electronic ballasts for public transport lighting
NOTE In this standard, the following print types are used:
– Requirements proper: in roman type.
– Test specifications: in italic type.
– Explanatory matter: in smaller roman type.
---------------------- Page: 9 ----------------------
SIST EN 61347-2-5:2002
61347-2-5 © IEC:2000 – 7 –
The text of this standard is based on the following documents:
FDIS Report on voting
34C/502/FDIS 34C/516/RVD

Full information on the voting for the approval of this standard can be found in the report on

voting indicated in the above table.

This publication has been drafted in accordance with the ISO/IEC Directives, Part 3.

Annexes A to H form an integral part of this standard.

IEC 61347 consists of the following parts, under the general title: Lamp controlgear:

– Part 1: General and safety requirements

– Part 2-1: Particular requirements for starting devices (other than glow starters

– Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors

for filament lamps

– Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps

– Part 2-4: Particular requirements for d.c. electronic ballasts for general lighting

– Part 2-5: Particular requirements for d.c. supplied electronic ballasts for public transport

lighting

– Part 2-6: Particular requirements for d.c. supplied electronic ballasts for aircraft lighting

– Part 2-7: Particular requirements for d.c. supplied electronic ballasts for emergency

lighting
– Part 2-8: Particular requirements for ballasts for fluorescent lamps

– Part 2-9: Particular requirements for ballasts for discharge lamps (excluding fluorescent

lamps)

– Part 2-10: Particular requirements for electronic invertors and convertors for high-

frequency operation of cold start tubular discharge lamps (neon tubes)

– Part 2-11: Particular requirements for miscellaneous electronic circuits used with

luminaires

The committee has decided that the contents of this publication will remain unchanged until

2003. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
–––––––––––
To be published.
---------------------- Page: 10 ----------------------
SIST EN 61347-2-5:2002
61347-2-5 © IEC:2000 – 9 –
INTRODUCTION

This first edition of IEC 61347-2-5, published in conjunction with IEC 61347-1, represents an

editorial review of section four of IEC 60924. The formatting into separately published parts

provides for ease of future amendments and revisions. Additional requirements will be added

as and when a need for them is recognized.

This standard, and the parts which make up IEC 61347-2, in referring to any of the clause

...