EN 50107-3:2018/AC:2018-10
(Corrigendum)Product standard covering luminous signs with discharge lamps and/or LED (light emitting diodes) and/or EL (electroluminescent) lightsources with a nominal voltage not exceeding 1000 V, with the exclusion of general lighting, traffic- or emergency related purpose
Product standard covering luminous signs with discharge lamps and/or LED (light emitting diodes) and/or EL (electroluminescent) lightsources with a nominal voltage not exceeding 1000 V, with the exclusion of general lighting, traffic- or emergency related purpose
A luminous sign, light-artwork or architectural accent lighting (finished functional sign, abbreviated: sign) shall comply with this product standard. The finished functional sign as a product fulfilling its intended purpose as luminous sign can be achieved by combining products with similar purpose through installation (according to HD 384/HD 60364 series) in order to yield a new product by itself. NOTE 1: The scope of this product standard is specified by the areas C,D and E in the figure of Annex A. NOTE 2: Even if the physical execution of a particular luminous sign might qualify the luminous sign to meet the requirements of a luminaire according to EN 60598, the exclusion of general lighting, traffic and emergency related purpose is intended to avoid the requirements of EN 60598 which are impracticable and/or impossible to fulfil for most luminous signs. To cover the special safety problems related with luminous signs, the present product standard is intended.
Produktnorm für Lichtwerbeanlagen mit Entladungslampen und/oder LED- (lichtemittierende Dioden) und/oder EL- (elektrolumineszierende) Lichtquellen mit einer Nennspannung bis einschließlich 1 000 V, ausgenommen Allgemeinbeleuchtung, Verkehrs- oder Notbeleuchtung
Norme de produit couvrant les enseignes lumineuses avec des lampes à décharge et/ou à LED (diodes électroluminescentes) et/ou les sources lumineuses électroluminescentes (EL) avec une tension nominale ne dépassant pas 1000 V, à l'exclusion de l'éclairage général ainsi que des enseignes relatives à la circulation routière et aux situations d'urgence
Standard za proizvod, ki zajema svetlobne znake z razelektritvenimi sijalkami in/ali diodami LED (svetlečimi diodami) in/ali EL (elektroluminescenčnimi) svetlobnimi viri z nazivno napetostjo, ki ne presega 1000 V, razen splošne, cestne ali zasilne razsvetljave - Popravek AC
General Information
- Status
- Withdrawn
- Publication Date
- 25-Oct-2018
- Technical Committee
- CLC/TC 34 - 'Lamps and related equipment
- Drafting Committee
- CLC/TC 34 - 'Lamps and related equipment
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 14-Apr-2021
- Completion Date
- 20-Feb-2026
Relations
- Effective Date
- 30-Oct-2018
Get Certified
Connect with accredited certification bodies for this standard
Intertek Testing Services NA Inc.
Intertek certification services in North America.
UL Solutions
Global safety science company with testing, inspection and certification.
ANCE
Mexican certification and testing association.
Sponsored listings
Frequently Asked Questions
EN 50107-3:2018/AC:2018-10 is a corrigendum published by CLC. Its full title is "Product standard covering luminous signs with discharge lamps and/or LED (light emitting diodes) and/or EL (electroluminescent) lightsources with a nominal voltage not exceeding 1000 V, with the exclusion of general lighting, traffic- or emergency related purpose". This standard covers: A luminous sign, light-artwork or architectural accent lighting (finished functional sign, abbreviated: sign) shall comply with this product standard. The finished functional sign as a product fulfilling its intended purpose as luminous sign can be achieved by combining products with similar purpose through installation (according to HD 384/HD 60364 series) in order to yield a new product by itself. NOTE 1: The scope of this product standard is specified by the areas C,D and E in the figure of Annex A. NOTE 2: Even if the physical execution of a particular luminous sign might qualify the luminous sign to meet the requirements of a luminaire according to EN 60598, the exclusion of general lighting, traffic and emergency related purpose is intended to avoid the requirements of EN 60598 which are impracticable and/or impossible to fulfil for most luminous signs. To cover the special safety problems related with luminous signs, the present product standard is intended.
A luminous sign, light-artwork or architectural accent lighting (finished functional sign, abbreviated: sign) shall comply with this product standard. The finished functional sign as a product fulfilling its intended purpose as luminous sign can be achieved by combining products with similar purpose through installation (according to HD 384/HD 60364 series) in order to yield a new product by itself. NOTE 1: The scope of this product standard is specified by the areas C,D and E in the figure of Annex A. NOTE 2: Even if the physical execution of a particular luminous sign might qualify the luminous sign to meet the requirements of a luminaire according to EN 60598, the exclusion of general lighting, traffic and emergency related purpose is intended to avoid the requirements of EN 60598 which are impracticable and/or impossible to fulfil for most luminous signs. To cover the special safety problems related with luminous signs, the present product standard is intended.
EN 50107-3:2018/AC:2018-10 is classified under the following ICS (International Classification for Standards) categories: 29.140.30 - Fluorescent lamps. Discharge lamps. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 50107-3:2018/AC:2018-10 has the following relationships with other standards: It is inter standard links to EN 50107-3:2018. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 50107-3:2018/AC:2018-10 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Produktnorm für Lichtwerbeanlagen mit Entladungslampen und/oder LED- (lichtemittierende Dioden) und/oder EL- (elektrolumineszierende) Lichtquellen mit einer Nennspannung bis einschließlich 1 000 V, ausgenommen Allgemeinbeleuchtung, Verkehrs- oder NotbeleuchtungNorme de produit couvrant les enseignes lumineuses avec des lampes à décharge et/ou à LED (diodes électroluminescentes) et/ou les sources lumineuses électroluminescentes (EL) avec une tension nominale ne dépassant pas 1000 V, à l'exclusion de l'éclairage général ainsi que des enseignes relatives à la circulation routière et aux situations d'urgenceProduct standard covering luminous signs with discharge lamps and/or LED (light emitting diodes) and/or EL (electroluminescent) lightsources with a nominal voltage not exceeding 1000 V, with the exclusion of general lighting, traffic- or emergency related purpose29.140.30Fluorescent lamps. Discharge lampsICS:Ta slovenski standard je istoveten z:EN 50107-3:2018/AC:2018-10SIST EN 50107-3:2018/AC:2019en01-januar-2019SIST EN 50107-3:2018/AC:2019SLOVENSKI
STANDARD
Corrigendum to EN 50107-3:2018 English version
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...