High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earthing switches

Applies to alternating current disconnectors and earthing switches, designed for indoor and outdoor enclosed and open terminal installations for voltages above 1 000 V and for service frequencies up to and including 60 Hz. It also applies to the operating devices of these disconnectors and earthing switches and their auxiliary equipment. Additional requirements for disconnectors and earthing switches in enclosed switchgear and controlgear are given in EN 60298, EN 60466 and EN 60517. Note: Disconnectors in which the fuse forms an integral part are not covered by this standard This first edition cancels and replaces Ed.3 of EN 60129 published in 1984, amendment 1 (1992) and amendment 2 (1996). In addition, it replaces EN 61128, EN 61129 and EN 61259, which are hereby withdrawn and cancelled.

Hochspannungs-Schaltgeräte und -Schaltanlagen - Teil 102: Wechselstrom-Trennschalter und -Erdungsschalter

Appareillage à haute tension - Partie 102: Sectionneurs et sectionneurs de terre à courant alternatif

S'applique aux sectionneurs et aux sectionneurs de terre à courant alternatif, prévu pour l'intérieur ou l'extérieur dans des postes sous enveloppe ou de type ouverts, pour des tensions supérieures à 1 000 V et des fréquences de service jusques et y compris 60 Hz. Cette norme s'applique également aux dispositifs de commande de ces sectionneurs et sectionneurs de terre et à leurs équipements auxiliaires. Des règles complémentaires pour les sectionneurs et les sectionneurs de terre intégrés dans l'appareillage sous enveloppe sont données dans la CEI 60298, la CEI 60466 et la CEI 60517. Note: Les sectionneurs dans lesquels un fusible fait partie intégrante, ne sont pas couverts par cette norme. Cette première édition annule et remplace la troisième édition de la CEI 60129 parue en 1984, l'amendement 1 (1992) et l'amendement 2 (1996) et constitue une révision technique. De plus, elle remplace la CEI 61128, la CEI 61129 et la CEI 61259 qui ont été annulées. Un tableau de références est présenté à la fin de cet avant-propos. Cette version bilingue (2003-07) remplace la version monolingue anglaise. Le contenu des corrigenda d'avril 2002, mai 2003, février 2005 et juin 2014 a été pris en considération dans cet exemplaire.

High-voltage switchgear and controlgear - Part 102: High-voltage alternating current disconnectors and earthing switches

Uporablja se za ločilna stikala za izmenični tok in ozemljitvena stikala za notranje in zunanje zaprte in odprte inštalacije priključkov za napetosti nad 1000 V in storitvene frekvence do in vključno s 60 Hz. Prav tako se uporablja za krmilne naprave teh ločilnih in ozemljitvenih stikal ter njihovo dodatno opremo.

General Information

Status
Withdrawn
Publication Date
25-Jul-2002
Withdrawal Date
28-Feb-2005
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
19-Jun-2021
Completion Date
19-Jun-2021

Relations

Buy Standard

Standard
EN 62271-102:2002
English language
99 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2002
1DGRPHãþD
SIST EN 60129:1995
SIST EN 60129:1995/A2:2001
SIST EN 61129:1995
SIST EN 61129:1995/A1:2001
SIST EN 61259:1995
High-voltage switchgear and controlgear - Part 102: High-voltage alternating
current disconnectors and earthing switches
High-voltage switchgear and controlgear -- Part 102: Alternating current disconnectors
and earthing switches
Hochspannungs-Schaltgeräte -- Teil 102: Wechselstrom-Trennschalter und -
Erdungsschalter
Appareillage à haute tension -- Partie 102: Sectionneurs et sectionneurs de terre à
courant alternatif
Ta slovenski standard je istoveten z: EN 62271-102:2002
ICS:
29.130.10 Visokonapetostne stikalne in High voltage switchgear and
krmilne naprave controlgear
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 62271-102
NORME EUROPÉENNE
EUROPÄISCHE NORM July 2002
ICS 29.130.10;29.130.99 Supersedes EN 60129:1994 + A1:1994 + A2:1996;
EN 61129:1994 + A1:1995 and
EN 61259:1994
English version
High-voltage switchgear and controlgear
Part 102: High-voltage alternating current
disconnectors and earthing switches
(IEC 62271-102:2001 + corrigendum 2002)
Appareillage à haute tension Hochspannungs-Schaltgeräte
Partie 102: Sectionneurs et sectionneurs Teil 102: Hochspannungs-Wechselstrom-
de terre à courant alternatif haute tension Trennschalter und -Erdungsschalter
(CEI 62271-102:2001 (IEC 62271-102:2001
+ corrigendum 2002) + Corrigendum 2002)
This European Standard was approved by CENELEC on 2002-03-05. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62271-102:2002 E
Foreword
The text of document 17A/617/FDIS, future edition 1 of IEC 62271-102, prepared by SC 17A, High-voltage
switchgear and controlgear, of IEC TC 17, Switchgear and controlgear, was submitted to the IEC-
CENELEC parallel vote and was approved by CENELEC as EN 62271-102 on 2002-03-05.
This European Standard supersedes the European Standards EN 60129:1994 + A1:1994 + A2:1996 ,
EN 61129:1994 + A1:1995 and EN 61259:1994.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2003-02-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2005-03-01
This European Standard is to be used in conjunction with EN 60694:1996 to which it refers and which is
applicable, unless otherwise specified. In order to simplify the indication of corresponding requirements,
the same numbering of clauses and subclauses is used as in EN 60694. Additional subclauses are
numbered from 101.
Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, annexes A, B, C, E, F and ZA are normative and annex D is informative.
Annex ZA has been added by CENELEC.
The numbering of the standards falling under the responsibility of IEC/SC 17A and IEC/SC 17B will apply
the following principle:
a) Common standards prepared by SC 17A and SC 17C will start with IEC 62271-001;
b) Standards of SC 17A will start with IEC 62271-100;
c) Standards of SC 17C will start with IEC 62271-200;
d) Guides prepared by SC 17A and SC 17C will start with IEC 62271-300.

- 3 - EN 62271-102:2002
The following table provides an overview of the relationship between the old and the new numbering of
standards falling under the responsibility of CLC/TC 17A and CLC/TC 17C.
High-voltage switchgear and controlgear –
IEC 62271/ Number of previous
EN 62271 standard, if any
Part Orignal title IEC EN/HD
1 Common specifications 60694; EN 60694;
60517 EN 60517
100 High-voltage alternating circuit-breakers 60056 HD 348, mod.
101 Synthetic testing of high-voltage alternating current circuit-breakers 60427 EN 60427
102 Alternating current disconnectors and earthing switches 60129 EN 60129
103 Switches for rated voltages above1 kV and less than 52 kV 60265-1 EN 60265-1
104 High-voltage switches for rated voltages of 52 kV and above 60265-2 EN 60265-2
105 High-voltage alternating current switch-fuse combinations 60420 EN 60420
106 High-voltage alternating current contactors and contactor-based motor-starters 60470 EN 60470
107 High-voltage alternating current switchgear-fuse combinations New --
108 Switchgear having combined functions New --
200 A.C.-metal enclosed switchgear and controlgear for rated voltages above 1 kV and 60298 EN 60298
up to and including 52 kV
201 A.C.-insulation -enclosed switchgear and controlgear for rated voltages above 1 kV 60466 --
and up to and including 38 kV
202 High-voltage/low-voltage prefabricated substations 61330 EN 61330
203 Gas-insulated metal-enclosed switchgear for rated voltages of 72,5 kV and above
60517; EN 60517;
61259 EN 61259
204 Rigid high-voltage gas-insulated transmission lines for rated voltages of 72,5 kV 61640 --
and above
300 Guide for seismic qualification of high-voltage alternating current circuit-breakers 61166 EN 61166
301 High-voltage alternating current circuit-breakers - Inductive load switching 61233 --
302 High-voltage alternating current circuit-breakers - Guide for short-circuit and 61633 --
switching test procedures for metal-enclosed and dead tank circuit-breakers
303 61634 --
High-voltage switchgear and controlgear - Use and handling of sulphur
hexafluoride (SF ) in high-voltage switchgear and controlgear
304 Additional requirements for enclosed switchgear and controlgear from 1 kV to 60932 --
72,5 kV to be used in severe climatic conditions
305 Cable connections for gas-insulated metal-enclosed switchgear for rated voltages 60859 --
of 72,5 kV and above - Fluid-filled and extruded insulation cables - Fluid-filled and
dry type cable-terminations
306 61639 --
Direct connection between power transformers and gas-insulated metal-enclosed
switchgear for rated voltages of 72,5 kV and above
307 High-voltage switchgear and controlgear - The use of electronic and associated 62063 --
technologies in auxiliary equipment of switchgear and controlgear
308 High-voltage alternating current circuit-breakers - Guide for asymmetrical short- 62215 --
circuit breaking test duty T100a
__________
Endorsement notice
The text of the International Standard IEC 62271-102:2001 and its corrigendum April 2002 was approved by
CENELEC as a European Standard without any modification.
__________
- 5 - EN 62271-102:2002
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other publications.
These normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications
apply to this European Standard only when incorporated in it by amendment or revision. For undated
references the latest edition of the publication referred to applies (including amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60137 1995 Insulated bushings for alternating EN 60137 1996
voltages above 1 kV
IEC 60265-1 1998 High-voltage switches EN 60265-1 1998
Part 1: Switches for rated voltages
above 1 kV and less than 52 kV
IEC 60265-2 1988 Part 2: High-voltage switches for rated EN 60265-2 1993
+ corr. February 1990 voltages of 52 kV and above
1)
IEC 60298 1990 A.C. metal-enclosed switchgear and EN 60298 1996
controlgear for rated voltages above + A11 1999
1 kV and up to and including 52 kV
IEC 60466 1987 A.C. insulation-enclosed switchgear and--
controlgear for rated voltages above
1 kV and up to and including 38 kV
2)
IEC 60517 1990 Gas-insulated metal-enclosed EN 60517 1996
switchgear for rated voltages of 72,5 kV + A11 1999
and above
IEC 60694 1996 Common specifications for high-voltage EN 60694 1996
switchgear and controlgear standards + corr. May 1999
IEC 60865-1 1993 Short-circuit currents – Calculation of--
effects
Part 1: Definitions and calculation
methods
ISO 2768-1 1989 General tolerances EN 22768-1 1993
Part 1: Tolerances for linear and
angular dimensions without individual
tolerance indications
1)
EN 60298 includes corrigendum April 1995 and A1:1994 to IEC 60298:1990.
2)
EN 60517 includes corrigendum April 1995 and A1:1994 to IEC 60517:1990.

NORME CEI
INTERNATIONALE IEC
62271-102
INTERNATIONAL
Première édition
STANDARD
First edition
2001-12
Appareillage à haute tension –
Partie 102:
Sectionneurs et sectionneurs de terre
à courant alternatif
High-voltage switchgear and controlgear –
Part 102:
Alternating current disconnectors
and earthing switches
 IEC 2003 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch  Web: www.iec.ch
CODE PRIX
XD
Commission Electrotechnique Internationale PRICE CODE
International Electrotechnical Commission
Международная Электротехническая Комиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

62271-102 © IEC:2003 – 3 –
CONTENTS
FOREWORD .13
1 General .21
1.1 Scope .21
1.2 Normative references.21
2 Normal and special service conditions .23
3 Definitions .23
3.1 General terms .23
3.2 Assemblies of switchgear and controlgear.23
3.3 Parts of assemblies.23
3.4 Switching devices .23
3.5 Parts of switching devices.27
3.6 Operation.29
3.7 Characteristic quantities.31
4 Ratings .35
4.1 Rated voltage (U ).37
r
4.2 Rated insulation level.37
4.3 Rated frequency (f ) .37
r
4.4 Rated normal current and temperature rise .37
4.5 Rated short-time withstand current (I ).37
k
4.6 Rated peak withstand current (I ).39
p
4.7 Rated duration of short-circuit (t ) .39
k
4.8 Rated supply voltage of closing and opening devices and of auxiliary and
control circuits (U ) .39
a
4.9 Rated supply frequency of closing and opening devices and of auxiliary
circuits .39
4.10 Rated pressure of compressed gas supply for insulation and/or operation.39
4.101 Rated short-circuit making current.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.