EN 61280-4-4:2006

Fibre optic communication subsystem test procedures - Part 4-4: Cable plants and links - Polarization mode dispersion measurement for installed links

This part of IEC 61280 provides uniform methods of measuring polarization mode dispersion (PMD) of single-mode installed links. An installed link is the optical path between transmitter and receiver, or a portion of that optical path. These measurements may be used to assess the suitability of a given link for high bit rate applications or to provide insight on the relationships of various related transmission attributes.

Prüfverfahren für Lichtwellenleiter-Kommunikationsuntersysteme - Teil 4-4: Kabelnetze und Übertragungsstrecken - Messung der Polarisationsmodendispersion von installierten Übertragungsstrecken

Procédures d'essai des sous-systèmes de télécommunication à fibres optiques - Partie 4-4: Installation de câbles et liens - Mesure de la dispersion de mode polarisation pour les liaisons installées

La présente partie de la CEI 61280 fournit des méthodes uniformes de mesure de la dispersion de mode de polarisation (PMD) de liaisons unimodales installées. Une liaison installée est le chemin optique entre l'émetteur et le récepteur ou une partie de ce chemin optique. Ces mesures peuvent être utilisées afin d'évaluer si une liaison donnée est adaptée à des applications à débit binaire élevé ou pour connaître les relations entre différents attributs d'une transmission.

Postopki preskušanja optičnega komunikacijskega podsistema – 4-4. del: Kabelske oblike in povezave – Meritve polarizacijske razpršitve v vgrajenih povezavah (IEC 61280-4-4:2006)

General Information

• Status: Withdrawn
• Publication Date: 18-Apr-2006
• Withdrawal Date: 31-Jan-2009
• ICS: 33.180.01 - Fibre optic systems in general
• Technical Committee: CLC/SR 86C - Fibre optic systems and active devices
• Drafting Committee: IEC/SC 86C - IEC_SC_86C
• Parallel Committee: IEC/SC 86C - IEC_SC_86C
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 18-Aug-2020
• Completion Date: 18-Aug-2020
• Ref Project: SIST EN 61280-4-4:2006 - Fibre optic communication subsystem test procedures -- Part 4-4: Cable plants and links - Polarization mode dispersion measurement for installed links

Relations

• Replaced By: EN 61280-4-4:2017 - Fibre optic communication subsystem test procedures - Part 4-4: Cable plants and links - Polarization mode dispersion measurement for installed links
• Effective Date: 03-May-2016

Standards Content (Sample)

SLOVENSKI SIST EN 61280-4-4:2006

STANDARD
julij 2006
Postopki preskušanja optičnega komunikacijskega podsistema – 4-4. del:
Kabelske oblike in povezave – Meritve polarizacijske razpršitve v vgrajenih
povezavah (IEC 61280-4-4:2006)
Fibre optic communication subsystem test procedures – Part 4-4: Cable plants and
links – Polarization mode dispersion measurement for installed links (IEC 61280-4-
4:2006)
ICS 33.180.01 Referenčna številka
SIST EN 61280-4-4:2006(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 61280-4-4

NORME EUROPÉENNE
April 2006
EUROPÄISCHE NORM

ICS 33.180.01


English version


Fibre optic communication subsystem test procedures
Part 4-4: Cable plants and links -
Polarization mode dispersion measurement for installed links
(IEC 61280-4-4:2006)


Procédures d'essai des sous-systèmes  Prüfverfahren für Lichtwellenleiter-
de télécommunication à fibres optiques Kommunikationsuntersysteme
Partie 4-4: Installation de câbles et liens - Teil 4-4: Kabelnetze
Mesure de la dispersion de mode und Übertragungsstrecken -
polarisation pour les liaisons installées Messung der
(CEI 61280-4-4:2006) Polarisationsmodendispersion
von installierten Übertragungsstrecken
(IEC 61280-4-4:2006)




This European Standard was approved by CENELEC on 2006-02-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61280-4-4:2006 E

---------------------- Page: 2 ----------------------

EN 61280-4-4:2006 - 2 -
Foreword
The text of document 86C/683/FDIS, future edition 1 of IEC 61280-4-4, prepared by SC 86C, Fibre optic
systems and active devices, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote
and was approved by CENELEC as EN 61280-4-4 on 2006-02-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-12-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-02-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61280-4-4:2006 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60793-1-48 NOTE Harmonized as EN 60793-1-48:2003 (not modified).
IEC 61290-11-1 NOTE Harmonized as EN 61290-11-1:2003 (not modified).
IEC 61290-11-2 NOTE Harmonized as EN 61290-11-2:2005 (not modified).
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61280-4-4:2006
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
1) 2)
IEC 60793-1-44 - Optical fibres EN 60793-1-44 2002
Part 1-44: Measurement methods and
test procedures - Cut-off wavelength



1)
Undated reference.
2)
Valid edition at date of issue.
...