EN 60317-15:2004/A1:2010

Specifications for particular types of winding wires - Part 15: Polyesterimide enamelled round aluminium wire, class 180

Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 15: Runddrähte aus Aluminium, lackisoliert mit Polyesterimid, Klasse 180

Spécifications pour types particuliers de fils de bobinage - Partie 15: Fil de section circulaire en aluminium émaillé avec polyesterimide, classe 180

Specifikacije za posebne tipe navitij - 15. del: S poliesterimidom emajliran aluminijev okrogel vodnik, razred 180 (IEC 60317-15:2004/A1:2010)

Določa zahteve za emajliran aluminijev okrogel vodnik razreda 180 z enojnim premazom na osnovi poliesterimidne smole, ki se lahko spremeni, pod pogojem, da ohrani kemično identiteto originalne smole in izpolnjuje vse zahteve za vodnik. Razred 180 je toplotni razred, ki zahteva minimalni temperaturni indeks 180 in temperaturo toplotnega šoka vsaj 200 °C.   Temperatura v stopinjah Celzija, ki ustreza temperaturnemu indeksu, ni nujno temperatura, priporočena za obratovanje vodnika, saj je to odvisno od številnih dejavnikov, vključno z vrsto vključene opreme.  Razpon nominalnih premerov prevodnikov, ki jih zajema ta standard, je naslednji: - stopnja 1: 0,400 mm do vključno 1,600 mm; - stopnja 2: 0,400 mm do vključno 5,000 mm. Nominalne premere prevodnikov določa Klavzula 4 IEC 60317-0-3. Glavne spremembe v primerjavi s predhodno izdajo so navedene v nadaljevanju:  -  nove zahteve za videz,  Podklavzula 3.2, dodano; - preskus prožnosti, Klavzula 7, velja za neprimerno; - preskus prerezovanja, Klavzula 10, velja za neprimerno;- preskus neuspešnosti pri visoki temperaturi, Klavzula 22, izbrisano; - nov preskus poroznosti, Klavzula 23, dodano.

General Information

• Status: Published
• Publication Date: 18-Mar-2010
• Withdrawal Date: 28-Feb-2013
• ICS: 29.060.10 - Wires
• Technical Committee: CLC/TC 55 - Winding wires
• Drafting Committee: IEC/TC 55 - IEC_TC_55
• Parallel Committee: IEC/TC 55 - IEC_TC_55
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 19-Mar-2010
• Completion Date: 19-Mar-2010
• Ref Project: SIST EN 60317-15:2005/A1:2010 - Specifications for particular types of winding wires - Part 15: Polyesterimide enamelled round aluminium wire, class 180 (IEC 60317-15:2004/A1:2010)

Relations

• Amends: EN 60317-15:2004 - Specifications for particular types of winding wires - Part 15: Polyesterimide enamelled round aluminium wire, class 180
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2010
Specifikacije za posebne tipe navitij - 15. del: S poliesterimidom emajliran
aluminijev okrogel vodnik, razred 180 (IEC 60317-15:2004/A1:2010)
Specifications for particular types of winding wires - Part 15: Polyesterimide enamelled
round aluminium wire, class 180 (IEC 60317-15:2004/A1:2010)
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 15:
Runddrähte aus Aluminium, lackisoliert mit Polyesterimid, Klasse 180 (IEC 60317-
15:2004/A1:2010)
Spécifications pour types particuliers de fils de bobinage - Partie 15: Fil de section
circulaire en aluminium émaillé avec polyesterimide, classe 180 (CEI 60317-
15:2004/A1:2010)
Ta slovenski standard je istoveten z: EN 60317-15:2004/A1:2010
ICS:
29.060.10 Žice Wires
77.150.10 Aluminijski izdelki Aluminium products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60317-15/A1
NORME EUROPÉENNE
March 2010
EUROPÄISCHE NORM
ICS 29.060.10
English version
Specifications for particular types of winding wires -
Part 15: Polyesterimide enamelled round aluminium wire, class 180
(IEC 60317-15:2004/A1:2010)
Spécifications pour types particuliers  Technische Lieferbedingungen
de fils de bobinage - für bestimmte Typen von Wickeldrähten -
Partie 15: Fil de section circulaire Teil 15: Runddrähte aus Aluminium,
en aluminium émaillé lackisoliert mit Polyesterimid, Klasse 180
avec polyesterimide, classe 180 (IEC 60317-15:2004/A1:2010)
(CEI 60317-15:2004/A1:2010)
This amendment A1 modifies the European Standard EN 60317-15:2004; it was approved by CENELEC on
2010-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels

© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60317-15:2004/A1:2010 E

Foreword
The text of document 55/1121/CDV, future amendment 1 to IEC 60317-15:2004, prepared by IEC TC 55,
Winding wire, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
amendment A1 to EN 60317-15:2004 on 2010-03-01.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all su
...