EN 61167:2016

Metal halide lamps - Performance specification

IEC 61167:2015 specifies the performance requirements for metal halide lamps for general lighting purposes. This third edition replaces the second edition published in 2011. This third edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition. a) A set of new lamp data sheets (20 W, 35 W, 50 W, 100 W) is introduced. b) Reference to ILCOS (International lamp coding system) is removed from the lamp data sheets and now located in a new annex. c) Information on outer bulb temperature (and in some cases also on pin temperature and temperature adjacent to cap) is replaced with an explanation on differences in manufacturers' construction; this explanation is given in detail in a new annex.

Halogen-Metalldampflampen - Anforderungen an die Arbeitsweise

Lampes aux halogénures métalliques - Spécifications de performance

L'IEC 61167:2015 spécifie les exigences de performances relatives aux lampes aux halogénures métalliques pour l'éclairage à usage général. Cette troisième édition annule et remplace la deuxième édition parue en 2011. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente. a) Un jeu de nouvelles fiches techniques de lampes (20 W, 35 W, 50 W, 100 W) a été inséré. b) La référence à ILCOS (Système international de codification des lampes) a été retirée des fiches techniques de lampes et fait désormais l'objet d'une nouvelle annexe. c) Les informations sur la température de l'ampoule externe (et dans certains cas également sur la température de pincement et sur la température à proximité directe du culot) ont été remplacées par une explication sur les différences de construction entre les fabricants, cette explication étant détaillée dans une nouvelle annexe.

Sijalke s kovinskim halidom - Tehnične specifikacije (IEC 61167:2015)

Ta mednarodni standard določa zahteve glede zmogljivosti za sijalke s kovinskim halidom za splošno razsvetljavo.
Pri nekaterih zahtevah iz tega standarda je omenjen »tehnični list ustrezne sijalke«. Tehnični listi za nekatere sijalke so vključeni v ta standard. Ustrezne podatke za druge sijalke, ki sodijo v področje uporabe tega standarda, zagotovi njihov proizvajalec ali odgovorni prodajalec.
Zahteve iz tega standarda se nanašajo samo na tipsko preskušanje.
Zahteve in tolerance, ki jih dovoljuje standard, ustrezajo rezultatom tipskega preskušanja vzorca, ki ga proizvajalec predloži za ta namen. Ta vzorec naj bi načeloma vseboval enote z lastnostmi, ki so značilne za proizvajalčev izdelek, in katerih vrednosti so kar se da podobne srednjim vrednostim proizvedenih izdelkov.
S tolerancami, podanimi v standardu, se lahko pričakuje, da bo večina primerkov izdelka, ki je proizveden v skladu z vzorcem za tipsko preskušanje, skladna s standardom. Vendar zaradi razpršene proizvodnje ni mogoče zagotoviti, da bi bili vsi izdelki znotraj določenih toleranc. Za smernice glede načrtov vzorčenja in postopkov za kontrolo po opisnih spremenljivkah glejte standard IEC 60410.

General Information

• Status: Withdrawn
• Publication Date: 09-Jun-2016
• Withdrawal Date: 09-Jun-2019
• ICS: 29.140.30 - Fluorescent lamps. Discharge lamps
• Technical Committee: CLC/TC 34 - 'Lamps and related equipment
• Drafting Committee: IEC/SC 34A - IEC_SC_34A
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 02-Nov-2021
• Completion Date: 02-Nov-2021
• Directive: 1194/2012 - Commission Regulation (EU) No 1194/2012 of 12 December 2012 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for directional lamps, light emitting diode lamps and related equipment
• Directive: 2009/125/EC - Directive 2005/32/EC of the European Parliament and of the Council of 6 July 2005 establishing a framework for the setting of ecodesign requirements for energy-using products and amending Council Directive 92/42/EEC and Directives 96/57/EC and 2000/55/EC of the European Parliament and of the Council
• Directive: 2010/30/EU - DIRECTIVE 2010/30/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 19 May 2010 on the indication by labelling and standard product information of the consumption of energy and other resources by energy-related products (recast)
• Directive: 245/2009 - Commission Regulation (EC) No 245/2009 of 18 March 2009 implementing Directive 2005/32/EC of the European Parliament and of the Council with regard to ecodesign requirements for fluorescent lamps without integrated ballast, for high intensity discharge lamps, and for ballasts and luminaires able to operate such lamps, and repealing Directive 2000/55/EC of the European Parliament and of the Council (Text with EEA relevance)
• Directive: 874/2012 - Commission Delegated Regulation (EU) No 874/2012 of 12 July 2012 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of electrical lamps and luminaires
• Mandate: M/485 - Mandate to CEN, CENELEC and ETSI for standardisation in the field of fluorescent lamps, high-intensity discharge lamps, ballasts and luminaires able to operate such lamps
• Mandate: M/495 - Standardisation mandate to CEN, CENELEC and ETSI under Directive 2009/125/EC relating to harmonised standards in the field of Ecodesign
• Ref Project: SIST EN 61167:2016 - Metal halide lamps - Performance specification (IEC 61167:2015)

Relations

• Replaces: EN 61167:2011 - Metal halide lamps - Performance specification
• Effective Date: 28-Jan-2023
• Replaced By: EN 61167:2018 - Metal halide lamps - Performance specification
• Effective Date: 07-Jun-2022
• Amended By: FprEN 61167:2014/prAA:2015 - Metal halide lamps - Performance specification
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61167:2016
01-september-2016
1DGRPHãþD
SIST EN 61167:2011
6LMDONHVNRYLQVNLPKDOLGRP7HKQLþQHVSHFLILNDFLMH,(&
Metal halide lamps - Performance specification (IEC 61167:2015)
Halogen-Metalldampflampen - Anforderungen an die Arbeitsweise
Lampes aux halogénures métalliques - Spécifications de performance
Ta slovenski standard je istoveten z: EN 61167:2016
ICS:
29.140.30 )OXRUHVFHQþQHVLMDONH6LMDONH Fluorescent lamps.
Discharge lamps
SIST EN 61167:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61167:2016

---------------------- Page: 2 ----------------------

SIST EN 61167:2016


EUROPEAN STANDARD EN 61167

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2016
ICS 29.140.30 Supersedes EN 61167:2011
English Version
Metal halide lamps - Performance specification
(IEC 61167:2015 , modified)
Lampes aux halogénures métalliques - Spécifications de Halogen-Metalldampflampen - Anforderungen an die
performance Arbeitsweise
(IEC 61167:2015 , modifiée) (IEC 61167:2015 , modifiziert)
This European Standard was approved by CENELEC on 2016-03-07. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 61167:2016 E

---------------------- Page: 3 ----------------------

SIST EN 61167:2016
EN 61167:2016
European foreword
The text of document 34A/1809/FDIS, future edition 3 of IEC 61167, prepared by SC 34A “Lamps” of
IEC/TC 34 “Lamps and related equipment" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 61167:2016.
A draft amendment, which covers common modifications to IEC 61167 (34A/1809/FDIS), was
prepared by CLC/TC 34A “Lamps” and approved by CENELEC.
The following dates are fixed:
• latest date by which the document has
(dop) 2016-12-10
to be implemented at national level by
publication of an identical
national standard or by endorsement
• latest date by which the national
(dow) 2019-06-10
standards conflicting with the document
have to be withdrawn
This document supersedes EN 61167:2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Clauses, subclauses, notes, tables, figures and annexes which are additional to those in
IEC 61167:2015 are prefixed “Z”.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directives.
For the relationship with EU Directives see informative Annexes ZZA, ZZB and ZZC, which are integral
parts of this document.

This standard provides test methods related to parameters as prescribed by EC Regulation 245/2009,
EU Regulation 1194/2012 and EU Regulation 874/2012 while conformity assessment (sampling,
conformity procedures as well as limits) for market surveillance are specified in the text of the above
Regulations.

Endorsement notice
The text of the International Standard IEC 61167:2015 was approved by CENELEC as a European
Standard with agreed common modifications.
2

---------------------- Page: 4 ----------------------

SIST EN 61167:2016
EN 61167:2016
COMMON MODIFICATIONS
CONTENTS Add the following annexes:
Annex ZA (normative) Normative references to international publications with
their corresponding European publications
Annex ZZ
...