EN 61314-1:2005
(Main)Fibre optic fan-outs - Part 1: Generic specification
Fibre optic fan-outs - Part 1: Generic specification
Specifies requirements for fan-outs used in the fibre optics field to provide a safe transition from multifibre cable units to individual fibres or cables.
Lichtwellenleiteraufteiler - Teil 1: Fachgrundspezifikation
Systèmes d'éclatement pour fibres et câbles optiques - Partie 1: Spécification générique
Spécifie les exigences pour les systèmes d'éclatement utilisés dans le domaine des fibres optiques pour fournir une transition sûre entre les unités de câbles multifibres et les fibres et câbles individuels.
Največja obremenitev optičnega vlakna – 1. del: Splošna specifikacija (IEC 61314-1:2005)
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 61314-1:2006
STANDARD
marec 2006
Največja obremenitev optičnega vlakna – 1. del: Splošna specifikacija (IEC
61314-1:2005)
Fibre optic fan-outs - Part 1: Generic specification (IEC 61314-1:2005)
ICS 33.180.20 Referenčna številka
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
EUROPEAN STANDARD EN 61314-1
NORME EUROPÉENNE
EUROPÄISCHE NORM August 2005
ICS 33.180.20 Supersedes EN 61314-1:1997
English version
Fibre optic fan-outs
Part 1: Generic specification
(IEC 61314-1:2005)
Systèmes d'éclatement pour fibres Lichtwellenleiteraufteiler
et câbles optiques Teil 1: Fachgrundspezifikation
Partie 1: Spécification générique (IEC 61314-1:2005)
(CEI 61314-1:2005)
This European Standard was approved by CENELEC on 2005-07-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61314-1:2005 E
Foreword
The text of document 86B/2107/FDIS, future edition 2 of IEC 61314-1, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to
the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61314-1 on 2005-07-01.
This European Standard supersedes EN 61314-1:1997.
This European Standard introduces a new standardization system of SC 86BXA and safety items.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2008-07-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61314-1:2005 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60874-1 NOTE Harmonized as EN 60874-1:1999 (not modified).
IEC 61753-051-3 NOTE Harmonized as EN 61753-051-3:2002 (not modified).
IEC 61754-2 NOTE Harmonized as EN 61754-2:1997 (not modified).
IEC 61754-4 NOTE Harmonized as EN 61754-4:1997 (not modified).
IEC 61754-13 NOTE Harmonized as EN 61754-13:1999 (not modified).
__________
- 3 - EN 61314-1:2005
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60027 Series Letter symbols to be used in electrical HD 60027 Series
technology
1)
IEC 60050-731 - International Electrotechnical - -
Vocabulary (IEV)
Chapter 731: Optical fibre
communication
1)
IEC 60410 - Sampling plans and procedures for - -
inspection by attributes
database
IEC 60617 Graphical symbols for diagrams - -
1)
2)
IEC 60695-11-5 - Fire hazard testing EN 60695-11-5 2005
Part 11-5: Test flames - Needle-flame
test method - Apparatus, confirmatory
test arrangement and guidance
1) 2)
IEC 60793-1-1 - Optical fibres EN 60793-1-1 2003
Part 1-1: Measurement methods and
test procedures - General and guidance
1) 2)
IEC 60794-1-1 - Optical fibre cables EN 60794-1-1 2002
Part 1-1: Generic specification –
General
1) 2)
IEC 60825-1 - Safety of laser products EN 60825-1 1994
Part 1: Equipment classification, + corr. February 1995
requirements and user's guide + A11 1996
1) 2)
IEC 61073-1 - Mechanical splices and fusion splice EN 61073-1 2000
protectors for optical fibres and cables
Part 1: Generic specification
1) 2)
IEC 61300-1 - Fibre optic interconnecting devices and EN 61300-1 2003
passive components - Basic test and
measurement procedures
Part 1: General and guidance
1)
Undated reference.
2)
Valid edition at date of issue.
Publication Year Title EN/HD Year
IEC 61300-2 Series Part 2: Tests EN 61300-2 Series
IEC 61300-3 Series Part 3: Examinations and EN 61300-3 Series
measurements
1)
IEC Guide 102 - Electronic components – Specification - -
structures for quality assessment
(Qualification approval and capability
approval)
1)
IEC QC 001001 - Basic rules of the IEC Quality - -
Assessment System for Electronic
Components (IECQ)
IEC QC 001002 Series IEC Quality Assessment System for - -
Electronic Components (IECQ) – Rules
of procedures
1)
IEC QC 001002-3 - Part 3: Approval procedures - -
1)
ISO 129-1 - Technical drawings - Indication of - -
dimensions and tolerances
Part 1: General principles
1) 2)
ISO 286-1 - ISO system of limits and fits EN 20286-1 1993
Part 1: Bases of tolerances, deviations
and fits
1)
ISO 1101 - Technical drawings - Geometrical - -
tolerancing - Tolerancing of form,
orientation, location and run-out -
Generalities, definitions, symbols,
indications on drawings
1)
ISO 8601 - Data elements and interchange formats - -
- Information interchange -
Representation of dates and times
NORME CEI
INTERNATIONALE
IEC
61314-1
INTERNATIONAL
QC 880000
STANDARD
Deuxième édition
Second edition
2005-06
Systèmes d'éclatement pour fibres
et câbles optiques –
Partie 1:
Spécification générique
Fibre optic fan-outs –
Part 1:
Generic specification
IEC 2005 Droits de reproduction réservés Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
T
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue
61314-1 IEC:2005 – 3 –
CONTENTS
FOREWORD.5
INTRODUCTION.9
1 Scope.11
2 Normative references.11
3 Terms and definitions .13
4 Requirements .13
4.1 Classification.15
4.2 Documentation .21
4.3 Standardisation system.27
4.4 Design and construction .33
4.5 Quality.35
4.6 Performance.35
4.7 Identification and marking.35
4.8 Packaging .37
4.9 Storage conditions.37
4.10 Safety.37
5 Quality assessment procedures .39
5.1 Primary stage of manufacture .39
5.2 Structurally similar components .39
5.3 Qualification approval procedures .39
5.4 Quality conformance inspection .43
5.5 Certified records of released lots .45
5.6 Delayed deliveries .45
5.7 Delivery release before completion of group B tests .47
5.8 Alternative test methods .47
5.9 Unchecked parameters.47
Bibliography .49
Figure 1 – Pigtail/patchcord fan-out .15
Figure 2 – Semi-compact fan-out.15
Figure 3 – Compact fan-out.17
Figure 4 – Standards.31
Figure 5 – Interlink matrix for standards .33
Figure 6 – Quality assurance options.33
61314-1 IEC:2005 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
FIBRE OPTIC FAN-OUTS –
Part 1: Generic specification
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.