EN 61534-22:2014/A1:2021
(Amendment)Powertrack systems - Part 22: Particular requirements for powertrack systems intended for onfloor or underfloor installation
Powertrack systems - Part 22: Particular requirements for powertrack systems intended for onfloor or underfloor installation
Not available
Stromschienensysteme - Teil 22: Besondere Anforderungen für Stromschienensysteme für Fußbodeninstallationen
Systèmes de conducteurs préfabriqués - Partie 22: Exigences particulières pour les systèmes de conducteurs préfabriqués destinés au montage sur le sol ou sous le sol
Sistemi napajalnih razvodnic - 22. del: Posebne zahteve za sisteme napajalnih razvodnic, predvidene za montažo na podu ali pod njim - Dopolnilo A1 (IEC 61534-22:2014/AMD1:2021)
General Information
Relations
Overview
EN 61534-22:2014/A1:2021 is a European standard developed by the CLC (European Committee for Electrotechnical Standardization) that details particular requirements for powertrack systems intended for onfloor or underfloor installation. This standard serves as an amendment (A1) to EN 61534-22:2014, aligning with the International Electrotechnical Commission’s IEC 61534-22:2014/AMD1:2021. It specifies technical criteria and safety conditions essential for the design, construction, testing, and installation of powertrack systems that are embedded or mounted on or beneath floor surfaces in commercial, industrial, and residential environments.
Powertrack systems are integral to electrical cable management, providing efficient and safe pathways for electrical power distribution in buildings. This standard ensures such systems meet rigorous safety, performance, and durability requirements, considering unique environmental and operational factors associated with floor-level or below-floor installations.
Key Topics
Scope and Application
EN 61534-22 sets out the particular requirements that supplement the general provisions established in IEC 61534-1 regarding powertrack systems specifically designed for onfloor or underfloor setups.Design and Construction
The standard addresses construction aspects to ensure mechanical robustness, electrical safety, and suitability for installation within flooring structures, including protective measures against mechanical stresses and environmental influences.Electrical Safety Requirements
Protection against electric shock and fire hazards is a primary focus, ensuring that powertrack systems conform to strict insulative and fire-resistant criteria appropriate to floor installation conditions.Marking and Documentation
Clear and durable marking for identification, along with comprehensive technical documentation, is mandated to support installation, maintenance, and compliance verification.Testing and Compliance
Specific tests reflecting onfloor or underfloor environmental conditions are outlined to verify performance, durability, and safety before these powertrack systems reach the market.Amendments and Updates
The 2021 amendment (A1) updates references to normative documents like IEC 61534-1:2011/AMD2:2020, reflecting evolving technical knowledge and harmonization with international standards.
Applications
Commercial Buildings
Installation in offices, shopping centers, and public venues where power distribution needs to be integrated discreetly into floor structures without compromising accessibility or safety.Industrial Facilities
Powertrack systems embedded under factory floors and production areas to deliver reliable power supply with resistance to mechanical wear and external influences.Residential Complexes
Suitable for modern housing solutions requiring onfloor or underfloor electrical distribution for flexible power access and aesthetic considerations.Cable Management Systems
Essential components in structured cable management, fulfilling both electrical and mechanical requirements while optimizing space utilization.
Related Standards
IEC 61534-1 Series
The general standard covering powertrack systems, which EN 61534-22:2014/A1:2021 supplements with particular onfloor and underfloor installation requirements.IEC 61534-22
The original version of the standard, to which this amendment A1 adds clarifications and updated normative references.ISO/IEC Directives
Guidelines and frameworks followed during drafting to ensure international harmonization and consistency in terminology, testing, and documentation.EU Directives and Regulations
Compliance with essential requirements of European Union electrical safety and product standards directives, ensuring market access across member states.
This standard is vital for manufacturers, installers, and regulatory bodies involved in powertrack system design and application. Adherence to EN 61534-22:2014/A1:2021 guarantees enhanced safety, reliability, and performance for onfloor and underfloor powertrack installations, supporting modern infrastructure demands and sustainable electrical installations.
Frequently Asked Questions
EN 61534-22:2014/A1:2021 is a amendment published by CLC. Its full title is "Powertrack systems - Part 22: Particular requirements for powertrack systems intended for onfloor or underfloor installation". This standard covers: Not available
Not available
EN 61534-22:2014/A1:2021 is classified under the following ICS (International Classification for Standards) categories: 29.060.10 - Wires; 29.120.20 - Connecting devices. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 61534-22:2014/A1:2021 has the following relationships with other standards: It is inter standard links to EN 61534-22:2014, EN 61534-22:2014/A11:2021. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 61534-22:2014/A1:2021 is associated with the following European legislation: EU Directives/Regulations: 2014/35/EU. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 61534-22:2014/A1:2021 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CLC standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2021
Sistemi napajalnih razvodnic - 22. del: Posebne zahteve za sisteme napajalnih
razvodnic, predvidene za montažo na podu ali pod njim - Dopolnilo A1 (IEC 61534-
22:2014/AMD1:2021)
Powertrack systems - Part 22: Particular requirements for powertrack systems intended
for onfloor or underfloor installation (IEC 61534-22:2014/AMD1:2021)
Stromschienensysteme - Teil 22: Besondere Anforderungen für Stromschienensysteme
für Fußbodeninstallationen (IEC 61534-22:2014/AMD1:2021)
Systèmes de conducteurs préfabriqués - Partie 22: Exigences particulières pour les
systèmes de conducteurs préfabriqués destinés au montage sur le sol ou sous le sol
(IEC 61534-22:2014/AMD1:2021)
Ta slovenski standard je istoveten z: EN 61534-22:2014/A1:2021
ICS:
29.060.10 Žice Wires
29.120.20 Spojni elementi Connecting devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 61534-22:2014/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2021
ICS 29.060.10; 29.120.20
English Version
Powertrack systems - Part 22: Particular requirements for
powertrack systems intended for onfloor or underfloor installation
(IEC 61534-22:2014/AMD1:2021)
Systèmes de conducteurs préfabriqués - Partie 22: Stromschienensysteme - Teil 22: Besondere Anforderungen
Exigences particulières pour les systèmes de conducteurs für Stromschienensysteme für Fußbodeninstallationen
préfabriqués destinés au montage sur le sol ou sous le sol (IEC 61534-22:2014/AMD1:2021)
(IEC 61534-22:2014/AMD1:2021)
This amendment A1 modifies the European Standard EN 61534-22:2014; it was approved by CENELEC on 2021-08-11. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61534-22:2014/A1:2021 E
European foreword
The text of document 23A/927/CDV, future IEC 61534-22/AMD1, prepared by SC 23A "Cable
management systems" of IEC/TC 23 "Electrical accessories" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN 61534-22:2014/A1:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-03-24
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-09-24
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a Standardization Request given to CENELEC by the
European Commission and the European Free Trade Association, and supports essential
requirements of EU Directive(s) / Regulation(s).
For the relationship with EU Directive(s) / Regulation(s), see informative Annex ZZ, which is an
integral part of EN 61534-22:2014/A11:2021.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61534-22:2014/AMD1:2021 was approved by CENELEC as
a European Standard without any modification.
IEC 61534-22 ®
Edition 2.0 2021-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 1
AM ENDEMENT 1
Powertrack systems –
Part 22: Particular requirements for powertrack systems intended for onfloor or
underfloor installation
Systèmes de conducteurs préfabriqués –
Partie 22: Exigences particulières pour les systèmes de conducteurs
préfabriqués destinés au montage sur le sol ou sous le sol
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.060.10; 29.120.20 ISBN 978-2-8322-9956-2
– 2 – IEC 61534-22:2014/AMD1:2021
© IEC 2021
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
POWERTRACK SYSTEMS –
Part 22: Particular requirements for powertrack
systems intended for onfloor or underfloor installation
AMENDMENT 1
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on a
...
SLOVENSKI STANDARD
SIST EN IEC 61534-22:2014/A1:2021
01-november-2021
Sistemi napajalnih razvodnic - 22. del: Posebne zahteve za sisteme napajalnih
razvodnic, predvidene za montažo na podu ali pod njim - Dopolnilo A1 (IEC 61534-
22:2014/AMD1:2021)
Powertrack systems - Part 22: Particular requirements for powertrack systems intended
for onfloor or underfloor installation (IEC 61534-22:2014/AMD1:2021)
Stromschienensysteme - Teil 22: Besondere Anforderungen für Stromschienensysteme
für Fußbodeninstallationen (IEC 61534-22:2014/AMD1:2021)
Systèmes de conducteurs préfabriqués - Partie 22: Exigences particulières pour les
systèmes de conducteurs préfabriqués destinés au montage sur le sol ou sous le sol
(IEC 61534-22:2014/AMD1:2021)
Ta slovenski standard je istoveten z: EN 61534-22:2014/A1:2021
ICS:
29.060.10 Žice Wires
29.120.20 Spojni elementi Connecting devices
SIST EN IEC 61534-22:2014/A1:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
SIST EN IEC 61534-22:2014/A1:2021
SIST EN IEC 61534-22:2014/A1:2021
EUROPEAN STANDARD EN 61534-22:2014/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2021
ICS 29.060.10; 29.120.20
English Version
Powertrack systems - Part 22: Particular requirements for
powertrack systems intended for onfloor or underfloor installation
(IEC 61534-22:2014/AMD1:2021)
Systèmes de conducteurs préfabriqués - Partie 22: Stromschienensysteme - Teil 22: Besondere Anforderungen
Exigences particulières pour les systèmes de conducteurs für Stromschienensysteme für Fußbodeninstallationen
préfabriqués destinés au montage sur le sol ou sous le sol (IEC 61534-22:2014/AMD1:2021)
(IEC 61534-22:2014/AMD1:2021)
This amendment A1 modifies the European Standard EN 61534-22:2014; it was approved by CENELEC on 2021-08-11. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61534-22:2014/A1:2021 E
SIST EN IEC 61534-22:2014/A1:2021
European foreword
The text of document 23A/927/CDV, future IEC 61534-22/AMD1, prepared by SC 23A "Cable
management systems" of IEC/TC 23 "Electrical accessories" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN 61534-22:2014/A1:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-03-24
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-09-24
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a Standardization Request given to CENELEC by the
European Commission and the European Free Trade Association, and supports essential
requirements of EU Directive(s) / Regulation(s).
For the relationship with EU Directive(s) / Regulation(s), see informative Annex ZZ, which is an
integral part of EN 61534-22:2014/A11:2021.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61534-22:2014/AMD1:2021 was approved by CENELEC as
a European Standard without any modification.
SIST EN IEC 61534-22:2014/A1:2021
IEC 61534-22 ®
Edition 2.0 2021-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 1
AM ENDEMENT 1
Powertrack systems –
Part 22: Particular requirements for powertrack systems intended for onfloor or
underfloor installation
Systèmes de conducteurs préfabriqués –
Partie 22: Exigences particulières pour les systèmes de conducteurs
préfabriqués destinés au montage sur le sol ou sous le sol
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.060.10; 29.120.20 ISBN 978-2-8322-9956-2
SIST EN IEC 61534-22:2014/A1:2021
– 2 – IEC 61534-22:2014/AMD1:2021
© IEC 2021
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
POWERTRACK SYSTEMS –
Part 22: Particular requirements for powertrack
systems intended for onfloor or underfloor installation
AMENDMENT 1
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-oper
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...