EN 61987-11:2012

Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 11: List of Properties (LOP) of measuring equipment for electronic data exchange - Generic structures

IEC 61987-11:2012(E) provides a characterisation of industrial process measuring equipment (device type dictionary) for integration in the Component Data Dictionary (CDD), and generic structures for Operating Lists of Properties (OLOPs) and Device Lists of Properties (DLOPs) of measuring equipment in conformance with IEC 61987-10.

Industrielle Leittechnik - Datenstrukturen und -elemente in Katalogen der Prozessleittechnik - Teil 11: Merkmalleisten (ML) für Messgeräte für den elektronischen Datenaustausch - Allgemeine Strukturen

Mesure et contrôle des processus industriels - Structures de données et éléments dans les catalogues d'équipement de processus - Partie 11: Liste de propriétés (LOP) des équipements de mesure pour l'échange électronique de données - Structures génériques

L'IEC 61987-11:2012 fournit une caractérisation des équipements de mesure de processus industriels (dictionnaire des types de dispositifs) pour l'intégration dans le dictionnaire de données de composants (CDD, en anglais "Component Data Dictionary") et des structures génériques pour les listes de propriétés fonctionnelles (OLOP, en anglais "Operating List of Properties") et les listes de propriétés des dispositifs de mesure (DLOP, en anglais "Device List of Properties") en conformité avec la CEI 61987-10. La présente version bilingue (2014-01) correspond à la version anglaise monolingue publiée en 2012-07.

Meritve in krmiljenje industrijskih procesov - Strukture podatkov in elementi v katalogih procesne opreme - 11. del: Seznam lastnosti merilne opreme za elektronsko izmenjavo podatkov - Rodovne strukture (IEC 61987-11:2012)

Ta del standarda IEC 61987 zagotavlja – karakterizacijo merilne opreme za industrijske procese (slovar tipov naprav) za integracijo v slovar podatkov o komponentah (CDD) in – rodovne strukture operativnih seznamov lastnosti (OLOP) in seznamov lastnosti naprav (DLOP) za merilno opremo v skladu z IEC 61987-10. Rodovne strukture za OLOP in DLOP vsebujejo najpomembnejše bloke za procesno merilno opremo. Bloki, ki se nanašajo na določeno vrsto opreme, bodo opisani v ustreznem delu serije IEC 61987 (na primer IEC 61987-12, merilniki pretoka). Lastnosti opreme, ki niso obravnavane v tem delu serije, na primer OLOP in DLOP za merilnike pretoka, skupaj z bloki in lastnostmi, bo mogoče najti v prihodnjih delih IEC 61987-12.

General Information

• Status: Withdrawn
• Publication Date: 20-Sep-2012
• Withdrawal Date: 27-Aug-2015
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.100.20 - Data link layer
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65E - IEC_SC_65E
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 21-Apr-2020
• Completion Date: 21-Apr-2020
• Ref Project: SIST EN 61987-11:2012 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 11: Lists of properties (LOP) of measuring equipment for electronic data exchange - Generic structures (IEC 61987-11:2012)

Relations

• Replaced By: EN 61987-11:2017 - Industrial-process measurement and control - Data structures and elements in -process equipment catalogues - Part 11: Lists of properties (LOPs) of measuring equipment for electronic data exchange - Generic structures
• Effective Date: 25-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2012
Meritve in krmiljenje industrijskih procesov - Strukture podatkov in elementi v
katalogih procesne opreme - 11. del: Seznam lastnosti merilne opreme za
elektronsko izmenjavo podatkov - Rodovne strukture (IEC 61987-11:2012)
Industrial-process measurement and control - Data structures and elements in process
equipment catalogues - Part 11: Lists of properties (LOP) of measuring equipment for
electronic data exchange - Generic structures (IEC 61987-11:2012)
Industrielle Leittechnik - Datenstrukturen und -elemente in Katalogen der
Prozessleittechnik - Teil 11: Merkmalleisten für Messgeräte für elektronischen
Datenaustausch – Allgemeine Strukturen (IEC 61987-11:2012)
Mesure et contrôle des processus industriels - Structures de données et éléments dans
les catalogues d'équipement de processus - Partie 11: Liste de propriétés (LOP) des
équipements de mesure pour l'échange électronique de données - Structures
génériques (CEI 61987-11:2012)
Ta slovenski standard je istoveten z: EN 61987-11:2012
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61987-11
NORME EUROPÉENNE
September 2012
EUROPÄISCHE NORM
ICS 25.040.40; 35.100.20
English version
Industrial-process measurement and control -
Data structures and elements in process equipment catalogues -
Part 11: List of Properties (LOP) of measuring equipment for electronic
data exchange - Generic structures
(IEC 61987-11:2012)
Mesure et contrôle des processus  Industrielle Leittechnik -
industriels - Datenstrukturen und -elemente in
Structures de données et éléments dans les Katalogen der Prozessleittechnik -
catalogues d'équipement de processus - Teil 11: Merkmalleisten (ML) für
Partie 11: Liste de propriétés (LOP) Messgeräte für den elektronischen
des équipements de mesure pour l'échange Datenaustausch - Allgemeine Strukturen
électronique de données - (IEC 61987-11:2012)
Structures génériques
(CEI 61987-11:2012)
This European Standard was approved by CENELEC on 2012-08-28. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61987-11:2012 E
Foreword
The text of document 65E/245/FDIS, future edition 1 of IEC 61987-11, prepared by SC 65E "Devices
and integration in enterprise systems" of IEC/TC 65 "Industrial-process measurement, control and
automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
(dop) 2013-05-28
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2015-08-28
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61987-11:2012 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60770-1:2010 NOTE Harmonised as EN 60770-1:2011 (not modified).
IEC 61346-1:1996 NOTE Harmonised as EN 61346-1:1996 (not modified).
IEC 61360-1:2009 NOTE Harmonised as EN 61360-1:2010 (not modified).
IEC 61360-2 NOTE Harmonised as EN 61360-2.
IEC 61360-5 NOTE Harmonised as EN 61360-5.

- 3 - EN 61987-11:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 61069-5 - Industrial-process measurement EN 61069-5 -
and control - Evaluation of system
properties for the purpose
of system assessment -
Part 5: Assessment of system dependability

IEC 61508-6 - Functional safety of EN 61508-6 -
electrical/electronic/programmable
electronic safety-related systems -
Part 6: Guidelines on the application
of IEC 61508-2 and IEC 61508-3

IEC 61987 Series Industrial-process measurement EN 61987 Series
and control - Data structures and elements
in process equipment catalogues

IEC 61987-1 2006 Industrial-process measurement EN 61987-1 2007
and control - Data structures
and elements in process equipment
catalogues -
Part 1: Measuring equipment
with analogue and digital output

IEC 61987-10 2009 Industrial-process measurement EN 61987-10 2009
+ corr. May 2012 and control - Data structures + AC:2011 2011
and elements in process equipment
catalogues -
Part 10: Lists of properties (LOPs) for
industrial-process measurement and control
for electronic data exchange - Fundamentals

IEC 62424 - Representation of process control EN 62424 -
engineering - Requests in P&I diagrams
and data exchange between P&ID tools and
PCE-CAE tools
IEC 61987-11 ®
Edition 1.0 2012-07
INTERNATIONAL
STANDARD
Industrial-process measurement and control – Data structures and elements

in process equipment catalogues –

Part 11: List of Properties (LOP) of measuring equipment for electronic data

exchange – Generic structures
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XA
ICS 25.040.40; 35.100.20 ISBN 978-2-83220-283-8

– 2 – 61987-11 © IEC:2012(E)
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 9
2 Normative references . 9
3 Terms and definitions . 10
3.1 Terms and definitions concerning measuring instruments . 10
3.2 Terms and definitions concerning relationships . 11
4 General . 13
4.1 Characterization scheme . 13
4.2 Aspects . 13
4.3 Rules for the construction of LOPs with block structure . 15
4.3.1 Block order . 15
4.3.2 Position of cardinality properties . 15
4.3.3 Naming of blocks created by cardinality . 15
4.3.4 Characterizing property . 15
4.3.5 Validity . 15
4.4 OLOP and DLOP . 15
4.5 Operating conditions . 16
4.6 Measuring equipment configuration . 17
5 Operating List of Properties (OLOP) . 18
5.1 Generic block structure . 18
5.2 Base conditions . 18
5.3 Process case . 19
5.3.1 General . 19
5.3.2 Process case variables . 19
5.3.3 Other process case variable . 20
5.4 Operating conditions for device design . 20
5.4.1 General . 20
5.4.2 Installation design conditions . 20
5.4.3 Environmental design conditions . 20
5.4.4 Process design conditions . 21
5.4.5 Pressure-temperature design conditions . 21
5.5 Process equipment . 22
5.5.1 General . 22
5.5.2 Line or equipment nozzle . 22
5.6 Physical location . 22
5.6.1 General . 22
5.6.2 Available power supply . 22
5.6.3 Process criticality classification . 23
5.6.4 Area classification . 23
6 Device list of properties (DLOP) . 23
6.1 General . 23
6.1.1 Generic block structure . 23
6.1.2 Relationship to IEC 61987-1 . 25

61987-11 © IEC:2012(E) – 3 –
6.1.3 Multivariable devices . 25
6.2 Identification . 25
6.3 Application . 26
6.4 Function and system design . 26
6.4.1 General . 26
6.4.2 Dependability . 26
6.5 Input . 26
6.5.1 General . 26
6.5.2 Measured variable . 26
6.5.3 Auxiliary input .
...