IEC 61000-4-14:1999/AMD2:2009

Amendment 2 - Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase

Amendement 2 - Compatibilité électromagnétique (CEM) - Partie 4-14: Techniques d'essai et de mesure - Essai d'immunité aux fluctuations de tension pour le matériel dont le courant d'entrée est inférieur ou égal à 16 A par phase

General Information

• Status: Published
• Publication Date: 12-May-2009
• ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
• ICS: 33.100.20 - Immunity
• Technical Committee: SC 77A - EMC - Low frequency phenomena
• Drafting Committee: WG 6 - TC 77/SC 77A/WG 6
• Current Stage: PPUB - Publication issued
• Start Date: 31-Aug-2009
• Completion Date: 13-May-2009

Relations

• Amends: IEC 61000-4-14:1999 - Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 61000-4-14 ®
Edition 1.0 2009-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
BASIC EMC PUBLICATION
PUBLICATION FONDAMENTALE EN CEM
AMENDMENT 2
AMENDEMENT 2
Electromagnetic compatibility (EMC) –
Part 4-14: Testing and measurement techniques – Voltage fluctuation immunity
test for equipment with input current not exceeding 16 A per phase

Compatibilité électromagnétique (CEM) –
Partie 4-14: Techniques d'essai et de mesure – Essai d’immunité aux
fluctuations de tension pour le matériel dont le courant d’entrée est inférieur ou
égal à 16 A par phase
IEC 61000-4-14:1999/A2:2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: [e-mail]
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: [e-mail]
Tel.: [phone]
Fax: [phone]
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
ƒ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
ƒ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: [e-mail]
Tél.: [phone]
Fax: [phone]
IEC 61000-4-14 ®
Edition 1.0 2009-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
BASIC EMC PUBLICATION
PUBLICATION FONDAMENTALE EN CEM
AMENDMENT 2
AMENDEMENT 2
Electromagnetic compatibility (EMC) –
Part 4-14: Testing and measurement techniques – Voltage fluctuation immunity
test for equipment with input current not exceeding 16 A per phase

Compatibilité électromagnétique (CEM) –
Partie 4-14: Techniques d'essai et de mesure – Essai d’immunité aux
fluctuations de tension pour le matériel dont le courant d’entrée est inférieur ou
égal à 16 A par phase
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
E
CODE PRIX
ICS 33.100.20 ISBN 978-2-88910-381-2
– 2 – 61000-4-14 Amend. 2 © IEC:2009
FOREWORD
This amendment has been prepared by subcommittee 77A: Low frequency phenomena, of
IEC technical committee 77: Electromagnetic compatibility.
The text of this amendment is based on the following documents:
Enquiry draft Report on voting
77A/669/CDV 77A/685/RVC
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the maintenance result date indicated on the IEC web site under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
_____________
Main title
Replace the part title on the cover page, the title page, above the Foreword and the Scope by
the following:
Part 4-14: Testing and measurement techniques –
Voltage fluctuation immunity test for equipment
with input current not exceeding 16 A per phase
2 Normative references
Replace the existing text of the first paragraph by the following new text:
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
Convert dated references into undated references.
5 Test levels
Replace the entire text after Table 1 with the following new text:
The repetition period T and the duration t of the voltage fluctuations are specified as T = 5 s
and t = 2 s (see Figure 1d).
The changes from the initial voltage to the test voltage, or from the test voltage back to the
initial voltage are achieved through five successive voltage steps in five consecutive cycles of

61000-4-14 Amend. 2 © IEC:2009 – 3 –
the mains supply, see Figure 1d. Each voltage step is of ΔU/5 and occurs over π/2 radians of
the period of the nominal frequency, f , (e.g. 5 ms for 50 Hz) see Figure 1b and Figure 1c.
n
For falling voltage changes, the voltage step begins at phase angle φ = 270° and finishes at
φ = 360°, see Figure 1b.
For rising voltage changes, the voltage step begins at phase angle φ = 180° and finishes at
φ = 270°, see Figure 1c.
x is an open test level. This value may be defined by the product standard in order to cover
situations other than the normal operating conditions of the network.
All of the levels can be proposed by the product committee, but for equipment for use in
public supply systems, the values shall not be lower than those specified for class 2.
NOTE The upper and lower voltage operation limits defined by the product manufacturer should not be exceeded.
6.2 Characteristics and performance of the test generator
Replace the existing Table 2 by the following new Table:
Table 2 – Characteristics of the test generator
Output voltage capability U ± 15 %
n
Voltage accuracy ±1 %
Zero crossing accuracy 250 μs at zero voltage crossover
The generator shall be able to supply enough current
Output current capability
according to the type of EUT in the test voltage range.
Overshoot/undershoot of the actual voltage Less than 5 % of the change in voltage
Voltage rise (and fall) time during switching Under 1 ms
Maximum interphase error (three-phase power supply) 2,5°
Frequency accuracy 2,5 % of f (50 Hz or 60 Hz)
n
NOTE The generator with a power amplifier specified in IEC 61000-4-11 is suitable for this test. An over-
voltage capability of U + 15 % is necessary.
n
6.3 Verification of the test
...